Pioneer MVH-150UBG: Operating this unit Operating this unit

Black plate (6,1)

Section

02

Operating this unit

Operating this unit

Operations using special buttons

Audio adjustments

Only frequencies lower than those in the selected

1 Press M.C. to display the setting mode.

1 Press M.C. to display the main menu.

range are outputted from the subwoofer.

2 Turn M.C. to select the equalizer.

Selecting a repeat play range

1 Press M.C. to display the setting mode.

POWERFUL—NATURAL—VOCAL—CUS-

1 Press 6/

to cycle between the following:

2 Turn M.C. to change the menu option

2 Press M.C. to cycle between the following:

TOM1—CUSTOM2—FLAT—SUPER BASS

! ALL – Repeat all files

and press to select AUDIO.

Cut-off frequency—Output level—Slope level

The equalizer band and equalizer level can be

! ONE – Repeat the current file

Rates that can be adjusted will flash.

customized when CUSTOM1 or CUSTOM2 is

! FLD – Repeat the current folder

3 Turn M.C. to select the audio function.

3 Turn M.C. to select the desired setting.

selected.

Playing tracks in random order

Once selected, the following audio functions

Cut-off frequency: 50HZ—63HZ—80HZ—

If selecting CUSTOM1 or CUSTOM2, complete

1 Press 5/

to turn random play on or off.

can be adjusted.

100HZ—125HZ—160HZ—200HZ

the procedures outlined below. If selecting

Tracks in a selected repeat range are played in

! FADER is not available when SUB.W/SUB.W

Output level: –24 to +6

other options, press M.C. to return to the pre-

random order.

is selected in SP-P/O MODE. For details, refer

Slope level: –6— –12

vious display.

! To change songs during random play, press d

to SP-P/O MODE (rear output and preout set-

! CUSTOM1 can be set separately for each

BASS BOOST (bass boost)

to switch to the next track. Pressing c restarts

ting) on page 7.

source.

playback of the current track from the begin-

! SUB.W, SUB.W CTRL and HPF SETTING are

! CUSTOM2 is a shared setting used in com-

1 Press M.C. to display the setting mode.

ning of the song.

not available when REAR/REAR is selected in

mon for all sources.

2 Turn M.C. to select a desired level.

SP-P/O MODE. For details, refer to

3 Press M.C. to display the setting mode.

0 to +6 is displayed as the level is increased or

Pausing playback

SP-P/O MODE (rear output and preout set-

4 Press M.C. to cycle between the following:

decreased.

1 Press 4/PAUSE to pause or resume.

ting) on page 7.

Equalizer band—Equalizer level

HPF SETTING (high pass filter adjustment)

Enhancing compressed audio and restoring rich

! SUB.W CTRL and HPF SETTING are not avail-

5 Turn M.C. to select the desired setting.

sound (sound retriever)

able when SUB.W is selected in OFF. For de-

Equalizer band: 80HZ—250HZ—800HZ—

When you do not want low sounds from the sub-

1 Press 3/S.Rtrv to cycle between:

tails, refer to SUB.W (subwoofer on/off

2.5KHZ—8KHZ

woofer output frequency range to play from the

1—2—OFF (off)

setting) on page 6.

Equalizer level: +6 to –6

front or rear speakers, turn on the HPF (high pass

1 is effective for low compression rates, and 2

! You can also switch the equalizer by pressing

filter). Only frequencies higher than those in the

is effective for high compression rates.

FADER (fader adjustment)

repeatedly.

selected range are output from the front or rear

speakers.

LOUDNESS (loudness)

1 Press M.C. to display the setting mode.

1 Press M.C. to display the setting mode.

Function settings

2 Turn M.C. to adjust the front/rear speaker bal-

Loudness compensates for deficiencies in the low-

2 Press M.C. to cycle between the following:

1 Press M.C. to display the main menu.

ance.

frequency and high-frequency ranges at low vol-

Cut-off frequency—Slope level

ume.

3 Turn M.C. to select the desired setting.

BALANCE (balance adjustment)

2 Turn M.C. to change the menu option

1 Press M.C. to select the desired setting.

Cut-off frequency: OFF—50HZ—63HZ—80HZ

and press to select FUNCTION.

1 Press M.C. to display the setting mode.

OFF (off)—LOW (low)—MID (mid)—HI (high)

—100HZ—125HZ—160HZ—200HZ

Once selected, the function below can be ad-

2 Turn M.C. to adjust the left/right speaker bal-

Slope level: –6— –12

SUB.W (subwoofer on/off setting)

justed.

ance.

This unit is equipped with a subwoofer output

EQ SETTING (equalizer recall)

S.RTRV (sound retriever)

which can be turned on or off.

1 Press M.C. to select the desired setting.

Automatically enhances compressed audio and

NOR (normal phase)—REV (reverse phase)—

restores rich sound.

OFF (subwoofer off)

1 Press M.C. to select the desired setting.

For details, refer to Enhancing compressed

SUB.W CTRL (subwoofer adjustment)

audio and restoring rich sound (sound retriever)

on page 6.

6

En

<QRB3391-A>6