Vitek VT-3540 GY: ENGLISH

ENGLISH

sensortransmitter (each 45 seconds). If the signal form the remote temperature sen

sor is not received for two minutes, the "" symbol appears on the upper line of the

display. If this happens, wait for several minutes, or press and hold the $ button for

two seconds. If the measured temperatures are beyond the device's measuring

range, the "" symbol will be shown on the clock display.

Maximum and Minimum Temperatures

Measured maximum and minimum temperatures will be automatically stored in the

clock's memory. Press the MEM button once to display the already measured mini

mum air temperature, press the MEM button for the second time to display the already

measured maximum air temperature To clear the multifunctional clock memory,

press and hold the MEM button for two seconds. Maximum and minimum temperature

readings will be cleared.

Temperature Change Indication

The temperature change indicators (TREND) display the temperature change,

according to the data received from the main and remote temperature sensors.

Absence of Data Signal

If the outside temperature readings are absent on the display, press and hold the $

button for two seconds, to start searching the data signal from the remote tempera

ture sensortransmitter.

If the data search brings no result, check up:

1. If the remote temperature sensor is within the data transfer range. If needed, short

en the distance between the multifunctional clock and the remote temperature

sensortransmitter.

2. If the remote temperature sensor's batteries should be replaced. Replace them, if

needed.

7