Vitek VT-3540 GY: ENGLISH

ENGLISH

Replacing Batteries

Replace batteries when the battery discharge indication appears or the device work

becomes unstable.

Wall Mount Apertures and Table Stand

The multifunctional clock set includes a detachable table stand for placing the clock

on a flat surface. To attach the device to the wall, use the aperture on the back panel

of the clock.

The Clock Operation

The remote temperature sensortransmitter starts transmitting the temperature data

with 45 second intervals (right after the batteries are installed). The multifunctional

clock starts accepting the signals from the remote temperature sensor within two min

utes (after the batteries are installed).

After receiving the data from the remote temperature sensortransmitter, the inside

temperature reading will be displayed on the upper line of the display, and the outside

temperature reading  on the next line. The multifunctional clock will automatically

renew the temperature reading in 45 second interval.

If the signal from the remote temperature sensor is not received, the "" sign will be

shown on the upper line of the display. To activate the repeated signal search, press

the DOWN $ button and hold it for two seconds. Perform this operation when the

clock has failed to accept data from the remote temperature sensortransmitter.

Display Symbols

Temperature Readings

The temperature inside the room is displayed on the upper second line of the display.

The outside air temperature is displayed on the upper line. The sign in the left of

the upper line indicates searching/accepting the signal from the remote temperature

6