Vitek VT-1372: ENGLISH
ENGLISH: Vitek VT-1372
ENGLISH
ously and remove the external
Replacing the external shaving
shaving block (2) (Pic. 4).
screen
- Using the brush (10), clean the
- Press the buttons (4) and remove
inside and outside of the shaving
the external shaving block (2).
block (2), and also, the internal cut-
- Remove the shaving screen from
ting blocks (3) (Pic. 5, 6).
the inside of the shaving block. This
- Replace the external shaving block,
requires a small sharp object (like a
attach the protective cap and store
small flat-head screwdriver) to
the shaver in the travel case.
remove the edge of the screen from
the holder on the shaving block
Wet cleaning
(Pic. 8).
Regular wet cleaning can help you
- Install the new shaving screen into
keep the shaver in good condition,
the inside of the shaving block.
preserve a high level of shaving ability
Make sure that the screen is secure
and prevent unpleasant odors or bac-
on all four sides (Pic. 9).
teria growth.
- Without removing the external
Replacing the internal cutting
shaving block, apply a small
block
amount of liquid soap to the shav-
- Remove the external shaving block
ing head.
(2).
- Turn on the shaver and pour a little
- Remove the internal cutting block
water onto the external shaving
by lifting upwards.
screen. After 10-20 seconds, turn
- Install a new internal cutting block.
off the shaver.
- Remove the screen and wash
PROTECTING THE ENVIRONMENT
under running water.
This shaver contains rechargeable
- Wash the internal cutting blocks
batteries.
(Pic. 7) under water.
Before disposing of the expired elec-
- Dry the shaver completely with a
tric shaver, remove the batteries and
clean cloth. Do not attach the pro-
dispose of them according to the laws
tective cap (1), so the external
of your country for disposal of harmful
shaving screen can dry.
waste.
Do not throw the shaver away until you
REPLACING SHAVING SYSTEM
remove the built-in rechargeable bat-
COMPONENTS
teries.
To preserve the cutting ability of the
shaver, it is recommended to replace
WARNINGS
the external shaving screen once a
Do not charge the batteries in
year - no less, and the internal cutting
places where the temperature is
block - every two years.
lower than 0°Ñ or higher than 40°Ñ,
or they are exposed to direct sun-
7
