Vitek VT-1256: ENGLISH

ENGLISH

WATER SPRAYER

• After you finish ironing set the (10) regula-

• You can dampen the fabric by pressing the

tor to the “MIN” position and the steam

spray button (4) several times (pic.4).

supply regulator (3) to the off position.

• Make sure that there is enough water in the

• Pull the plug out of the socket and let the

water tank (11).

iron cool down completely.

IRONING

ATTENTION!

• Place the iron on the base (8).

If during the operation steam is not constantly

• Insert the power plug into the outlet

.

supplied, check whether the temperature

• Set the temperature regulator (10) to the

regulator (10) is set properly and whether

required ironing temperature: “•”, “••”,

there is water in the reservoir.

“•••”or “MAX” (depending on the type

of fabric), the (9) indicator will light up

ADDITIONAL STEAM RELEASE

(Pic.3).

Additional steam release function is use-

• When the sole temperature (12) reaches

ful when ironing folds and can only be used

the desired temperature value, the (9) in-

at high ironing temperatures (when the iron

dicator will go out, you can start ironing.

temperature regulator (10) is set to “•••”or

• After you finish ironing set the (10) regula-

“MAX”).

tor to the “MIN” position.

• When the additional steam release button

• Pull the plug out of the socket and let the

(5) is pressed, steam will be vigorously re-

iron cool down completely.

leased from the openings in the iron sole

(pic.5).

STEAM IRONING

For steam ironing set the temperature regula-

Note: In order to avoid leakage of water

tor to steam using zone or “•••”or “MAX”.

from steam openings, press the addition-

The iron has an anti-drop valve, which

al steam supply button (5) with 4-5 sec.

stops water supply, when the sole tem-

interval.

perature is too low it prevents the appear-

ance of drops out of the sole openings

VERTICAL STEAMING

(12). While heating or cooling down of

For vertical steaming can be used only when

the sole (12), you will hear clicks of open-

the high temperature mode is used (set

ing/closing of the anti-drop valve it means

the temperature regulator (10) to “•••” or

that the valve works normally.

“MAX”).

• Place the iron on the base (8).

• Hold the iron vertically at the distance

• Insert the power plug into the outlet.

15-30 cm from the clothes press the ad-

• Make sure that there is enough water in

ditional steam release button (5) with 4-5

the water tank (11), the indicator (9) is not

seconds interval, steam will be released

lighting.

from the openings in the iron sole (12) (pic.

• Set the temperature regulator (10) to the

6).

required ironing temperature: to steam us-

ing zone or “•••”or “MAX”, the (9) indi-

Important information

cator will light up (Pic.3).

• Vertical steaming is not recommended for

• When the sole temperature (12) reaches

synthetic fabrics.

the desired temperature value, the (9) in-

• To avoid melting the fabric, do not touch

dicator will go out, you can start ironing.

the iron sole to the item while steaming.

• Turn the steam supply regulator (3) to set

• Never steam iron clothing that is being

the intensity of steaming, steam will start

worn as the steam temperature is very high

outgoing from the openings of the sole

and it can cause burns. Use a coat-hanger

(12).

or a stand.

6

1256.indd 61256.indd 6 25.03.2010 11:37:2025.03.2010 11:37:20