Vitek VT-1252: ENGLISH
ENGLISH: Vitek VT-1252
ENGLISH
temperature regulator (13) is set to «••»,
• Put the iron on the base (9).
“•••” or “max”).
• Insert the power plug into the outlet; the
• When the additional steam release but-
(6) indication and the water tank back-
ton (5) is pressed, steam will be vigor-
light (11) will light up.
ously released from the openings in the
• Set the temperature regulator (13) to the
iron sole (pic.5).
MAX. temperature: “max” the (12) indi-
• For convenient ironing in hard-to-reach
cator will light up (Pic.3).
places there are steam openings (16),
• When the sole temperature (15) reaches
from which steam goes out while press-
the desired temperature value, the (12)
ing the additional steam release button
indicator will go out, you can start clean-
(5).
ing of the iron chamber.
• Unplug the iron, set the temperature reg-
Note: In order to avoid leakage of water
ulator (13) to the «MIN» position.
from steam openings, press the addi-
• Pull the plug out of the socket.
tional steam supply button (5) with 4-5
• Hold the iron above the sink, set and
sec. interval.
hold the regulator (3) to the right position
– SELF CLEAN (pic.7).
VERTICAL STEAMING
• Boiling water together with scale will be
For vertical steaming can be used only
throwing out from the openings in the
when the high temperature mode is used
iron sole (15).
(set the temperature regulator (13) to «••»,
• Slightly sway the iron back and forth, un-
«•••» or «МАХ»).
til water goes out of the water tank (11).
• Hold the iron vertically at the distance15-
• Place the iron on the base (9) and let it
30 cm from the clothes press the addi-
cool down completely.
tional steam release button (5), steam
• When the sole (15) cools down com-
will be released from the openings (16) in
pletely, wipe it with a dry cloth.
the iron sole (15) (pic. 6).
• Before you take the iron for storing,
make sure that there is no water in the
Important information
water tank (11) and that the iron sole (15)
• Vertical steaming is not recommended
is completely dry.
for synthetic fabrics.
• To avoid melting the fabric, do not touch
AUTO-RELEASE FUNCTION
the iron sole to the item while steaming.
If the iron is about 30 seconds in the hori-
• Never steam iron clothing that is being
zontal position or about 10 minutes in the
worn as the steam temperature is very
vertical position it will switch off automati-
high and it can cause burns. Use a coat-
cally. You will hear a sound signal, and the
hanger or a stand.
(6) indications will be flashing.
To switch on the iron, just start ironing.
STEAM CHAMBER CLEANING
To prolong lifetime of the iron we recom-
Note: After switching off of the iron the
mend cleaning the steam chamber, espe-
preset temperature of the iron sole will be
cially in the regions with “hard” water.
set in some time depending on the position
• Fill the water tank (11) till the MAX mark
of the temperature regulator (13).
(14).
• Set the steam supply regulator (3) to the
CARE AND CLEANING
steam release OFF position.
• Before cleaning the iron, make sure that
7
1252.indd 71252.indd 7 16.04.2008 14:51:3216.04.2008 14:51:32
Оглавление
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- POLSKI
- POLSKI
- POLSKI
- POLSKI
- POLSKI
- ČESKÝ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК