Vitek VT-1252: ENGLISH
ENGLISH: Vitek VT-1252
ENGLISH
the synthetic and silk fabrics, iron them
STEAM IRONING
back-side.
For steam ironing set the temperature reg-
ulator to «••», «•••» or «МАХ». The iron
SETTING THE IRONING TEMPERATURE
has an anti-drop valve, which stops water
• Place the iron on the base (9).
supply, when the sole temperature is too
• Insert the power plug into the outlet; the
low it prevents the appearance of drops out
(6) indication and the water tank back-
of the sole openings (15). While heating or
light (11) will light up.
cooling down of the sole (15), you will hear
• Set the temperature regulator (13) to the
clicks of opening/closing of the anti-drop
required ironing temperature: “•”, “••”,
valve it means that the valve works nor-
“•••” or “max” (depending on the type
mally.
of fabric), the (12) indicator will light up
• Place the iron on the base (9).
(Pic.3).
• Insert the power plug into the outlet; the
• When the sole temperature (15) reaches
(6) indication and the water tank back-
the desired temperature value, the (12)
light (11) will light up.
indicator will go out, you can start iron-
• Make sure that there is enough water in
ing.
the water tank (11), the (10) indication is
not lighting.
Note: While steam ironing set the tem-
• Set the temperature regulator (13) to the
perature t «••», «•••» or «МАХ».
required ironing temperature: “•”, “••”,
“•••” or “max” (depending on the type
WATER SPRAYER
of fabric), the (12) indicator will light up
• You can dampen the fabric by press-
(Pic.3).
ing the spray button (4) several times
• When the sole temperature (15) reaches
(pic.4).
the desired temperature value, the (12)
• Make sure that there is enough water in
indicator will go out, you can start iron-
the water tank (11).
ing.
• Turn the steam supply regulator (3) to set
IRONING
the intensity of steaming, steam will start
• Place the iron on the base (9).
outgoing from the openings of the sole
• Insert the power plug into the outlet; the
(15).
(6) indication and the water tank back-
• After you finish ironing set the (13) regula-
light (11) will light up.
tor to the “min” position and the steam
• Set the temperature regulator (13) to the
supply regulator (3) to the left position.
required ironing temperature: “•”, “••”,
• Pull the plug out of the socket and let the
“•••” or “max” (depending on the type
iron cool down completely.
of fabric), the (12) indicator will light up
(Pic.3).
ATTENTION!
• When the sole temperature (15) reaches
If during the operation steam is not con-
the desired temperature value, the (12)
stantly supplied, check whether the tem-
indicator will go out, you can start iron-
perature regulator (13) is set properly.
ing.
• After you finish ironing set the (13) regu-
ADDITIONAL STEAM RELEASE
lator to the “min” position.
Additional steam release function is useful
• Pull the plug out of the socket and let the
when ironing folds and can only be used at
iron cool down completely.
high ironing temperatures (when the iron
6
1252.indd 61252.indd 6 16.04.2008 14:51:3216.04.2008 14:51:32
Оглавление
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- ENGLISH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- DEUTSCH
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- РУССКИЙ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- ҚАЗАҚ
- POLSKI
- POLSKI
- POLSKI
- POLSKI
- POLSKI
- ČESKÝ
- ČESKÝ
- ČESKÝ
- ČESKÝ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- УКРАЇНЬСКИЙ
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- БЕЛАРУСКI
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК
- ЎЗБЕК