Pioneer MVH-07UB: Radio

NOTE

The options vary depending on the unit.

Best stations memory (BSM)

Menu Item Description

The six strongest stations are stored on the number buttons (1/ to 6/ ).

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

1 After selecting the band, press the M.C. dial to display the main menu.

[100], [50]

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

SP-P/O MODE Select when there is a full-range speaker connected to the rear

English

speake

r output leads and there is a subwoofer connected to the

3 Turn the M.C. dial to select [BSM], then press to confirm.

[REAR/SUB.W]

RCA output.

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

To seek a station manually

t

he rear speaker output leads and there is a subwoofer

connected to the RCA output.

1 After selecting the band, press / to select a station.

Press and hold / then release to seek an available station. Scanning stops

[REAR/REAR] Select when there are full-range speakers connected to the rear

speaker output leads and RCA output. If there is a full-range

when the unit receives a station. To cancel seek tuning, press / .

speaker connected to the rear speaker output leads, and the

NOTE

RCA output is not used, you may select either [REAR/SUB.W] or

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 7).

[REAR/REAR].

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

r

estarted automatically. (Some of the settings may be retained

To store stations manually

[YES], [CANCEL]

even after resetting the unit.)

1 While receiving the station you want to store, press and hold one of the number

buttons (1/ to 6/ ) until it stops flashing.

Radio

Using PTY functions

The unit searches for a station by PTY (program type) information.

The tuner frequencies on this unit are allocated for use in Western Europe, Asia, the

Middle East, Africa and Oceania. Use in other areas may result in poor reception. The RDS

1 Press during FM reception.

(radio data system) function only works in areas that broadcast RDS signals for FM

2 Turn the M.C. dial to select a program type from [NEWS/INFO], [POPULAR],

stations.

[CLASSICS] or [OTHERS].

Receiving preset stations

3 Press the M.C. dial.

The unit begins to search for a station. When it is found, its program service name is

1 Press SRC/OFF to select [RADIO].

di

splayed.

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or [LW].

NOTES

• To cancel the search, press the M.C. dial.

3 Press a number button (1/ to 6/ ).

• The program of some stations may differ from that indicated by the transmitted PTY.

• If no station is broadcasting the type of program you searched for, [NOT FOUND] is displayed for

TIP

about two seconds and then the tuner returns to the original station.

The / buttons can be also used to select a preset station when [SEEK] is set to [PCH] in the

FUNCTION settings (page 7).

PTY list

For more details about PTY list, visit the following site:

http://www.pioneer.eu/eur/products/25/121/tech/CarAudio/PTY.html

5En