Pioneer DEH-2800UI: Car Remote Mode

Car Remote Mode: Pioneer DEH-2800UI

3 Operate the mobile device to start up the application.

Basic operations

You can make various adjustments in the FUNCTION settings (page 9).

You can operate the unit from a car remote application installed on an iPhone/Android

device. In some cases, you can control aspects of the application, such as source

selection, pause, etc., by using the unit.

For details on what operations are available on the application, see the application’s help

section.

8En

WARNING

5 Turn the M.C. dial to select [APP CONTROL] for an Android device connected via

USB.

If [ON] is selected in [P.APP AUTO ON] (page 10), the car remote application on the

Android device starts automatically, and all the steps are finished.

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press BAND/ or BAND/.

Car Remote Mode

Do not attempt to operate the application while driving. Make sure to pull off the road and park your

vehicle in a safe location before attempting to use the controls on the application.

For iPhone users

This function is compatible with iPhones and iPod touches installed with iOS 8.0 or later.

For Android device users

This function is compatible with devices that have Android OS 4.1 or later installed and

also support AOA (Android Open Accessory) 2.0.

Making the car remote connection

1 Connect this unit with the mobile device.

iPhone/Android device via USB (page 6)

Proceed to step 6 if you select the USB connection for iPhone.

2 Press the M.C. dial to display the main menu.

3 Turn the M.C. dial to select [SYSTEM], then press to confirm.

4 Turn the M.C. dial to select [ANDROID WIRED], then press to confirm.

NOTE

If the car remote application has not been installed on your Android device yet, a message that

prompts you to install the application will appear on your Android device. Select [OFF] in [P.APP

AUTO ON] to clear the message (page 10).

6 Press SRC/OFF to select any source.

7 Press and hold the M.C. dial.

The car remote application on the mobile device starts.

Listening to music on Android

1 Press SRC/OFF to select [ANDROID].

Basic operations

Purpose Operation

Select a track Press or .

Fast forward or reverse Press and hold or .

Pause/resume playback Press 4/PAUSE.

Sound retriever Press 3/S.Rtrv.

[1]: Effective for low compression rates

[2]: Effective for high compression rates

Settings

You can adjust various settings in the main menu.

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select one of the categories below, then press to confirm.

FUNCTION settings (page 9)

AUDIO settings (page 9)

SYSTEM settings (page 10)

ILLUMINATION settings (page 11)

MIXTRAX settings (page 11)

9En

English

3 Turn the M.C. dial to select the options, then press to confirm.

Menu Item Description

S.RTRV

FUNCTION settings

[1] (effective for low compression

Enhance compressed audio and restore rich

rates),

sound.

The menu items vary according to the source.

[2] (effective for high

Not available when:

compression rates),

USB is selected as a source and the MIXTRAX

Menu Item Description

[OFF]

function is set to on.

FM SETTING

CD-DA/CD-TEXT is played back.

The FLAC file is played back. (DEH-2800UI only)

[TALK], [STANDARD], [MUSIC] Match the sound quality level with the broadcast

signal conditions of the FM band signal.

AUDIO BOOK

(Available only when FM band is selected.)

[FASTER], [NORMAL], [SLOWER] Change the playback speed. (Not available when

BSM

[CONTROL iPod/CTRL iPod] is selected in the

control mode.)

Store the six strongest stations on the number

buttons (1/ to 6/ ) automatically.

PAU SE

REGIONAL

Pause or resume playback.

[ON], [OFF] Limit the reception to the specific regional

programs when AF (alternative frequencies

AUDIO settings

search) is selected. (Available only when FM

band is selected.)

Menu Item Description

LOCAL

FADER*1

FM: [OFF], [LV1], [LV2], [LV3], [LV4]

Restrict the tuning station according to the

Adjust the front and rear speaker balance.

MW/LW: [OFF], [LV1], [LV2]

signal strength.

BALANCE

TA

Adjust the left and right speaker balance.

[ON], [OFF] Receive current traffic information if available.

(Available only when FM band is selected.)

EQ SETTING

[SUPER BASS], [POWERFUL],

Select or customize the equalizer curve.

AF

[NATURAL], [VOCAL], [CUSTOM1],

[CUSTOM1] can be set separately for each source.

[ON], [OFF] Allow the unit to retune to a different frequency

[CUSTOM2], [FLAT]

However, each of the below combinations are set

providing the same station. (Available only when

to the same setting automatically.

FM band is selected.)

Select an equalizer band and

USB, iPod, ANDROID, and APP (iPhone)

level for further customizing.

[CUSTOM2] is a shared setting used for all

NEWS

Equalizer band: [80HZ], [250HZ],

sources.

[ON], [OFF] Interrupt the currently selected source with

[800HZ], [2.5KHZ], [8KHZ]

news programs. (Available only when FM band is

Equalizer level: [+6] to [–6]

selected.)

LOUDNESS

SEEK

[OFF], [LOW], [MID], [HI] Compensate for clear sound at low volume.

[MAN], [PCH] Assign or buttons to seek the stations

one by one (manual tuning) or select a station

SUB.W*2

from the preset channels.

[NOR], [REV], [OFF] Select the subwoofer phase.

USB

iPod

iPod

Menu Item Description

Menu Item Description

SUB.W CTRL*2*3

INFO DISPLAY (Only for DEH-X3800UI)

Cut-off frequency: [50HZ],

Only frequencies lower than those in the

Display the item on the sub information display.

[63HZ], [80HZ], [100HZ], [125HZ],

selected range are output from the subwoofer.

Select from “SPEANA”, “LEVEL METER”, “SOURCE”,

[160HZ], [200HZ]

“CLOCK”, and “OFF”.

Output level: [–24] to [+6]

AUTO PI

Slope level: [–12], [–24]

[ON], [OFF] Search for a different station with the same

BASS BOOST

programming, even if using a preset station.

[0] to [+6] Select the bass boost level.

AUX

HPF SETTING

[ON], [OFF] Set to [ON] when using an auxiliary device

Cut-off frequency: [OFF], [50HZ],

Only frequencies higher than the high-pass filter

connected to the unit.

[63HZ], [80HZ], [100HZ], [125HZ],

(HPF) cutoff are output from the speakers.

USB AUTO

[160HZ], [200HZ]

[ON], [OFF] Select [ON] to automatically switch to [USB]

Slope level: [–12], [–24]

source when a USB device/iPod is connected to

SLA

the unit.

[+4] to [–4] Adjust the volume level for each source except

Select [OFF] when a USB device/iPod is being

FM.

connected to the unit just for charging.

Each of the below combinations are set to the

MUTE MODE (Only for DEH-2800UI)

same setting automatically.

[MUTE], [20dB ATT], [10dB ATT] Mute or attenuate sound automatically when a

USB, iPod, ANDROID, and APP (iPhone)

signal from equipment with a mute function is

*1 Not available when [SUB.W/SUB.W] is selected in [SP-P/O MODE] in the INITIAL settings (page 4).

received.

*2 Not available when [REAR/REAR] is selected in [SP-P/O MODE] in the INITIAL settings (page 4).

PW SAVE*

*3 Not available when [OFF] is selected in [SUB.W].

[ON], [OFF] Reduce the battery power consumption.

Turning on the source is the only operation

SYSTEM settings

allowed when this function is on.

ANDROID WIRED

You can also access to these menus when the unit is turned off.

[MEMORY], [APP CONTROL] Select the appropriate connection method for an

Menu Item Description

Android device.

LANGUAGE

P. A P P AU TO O N

[ENG](English), [РУС](Russian),

Select the language to display the text

[ON], [OFF]

Select [ON] to automatically launch the car remote

[TUR](Turkish)

information from a compressed audio file.

application when an Android device is connected

CLOCK SET

to the unit via AOA. (Not available when

[MEMORY] is selected in [ANDROID WIRED].)

Set the clock (page 4).

12H/24H

* [PW SAVE] is canceled if the vehicle battery is disconnected and will need to be turned back on once

the battery is reconnected. When [PW SAVE] is off, depending on connection methods, the unit may

[12H], [24H] Select the time notation.

continue to draw power from the battery if your vehicles ignition does not have an ACC (accessory)

position.

10En

11En

English

Menu Item Description

ILLUMINATION settings

SHORT PLAYBCK

Menu Item Description

[1.0 MIN], [1.5 MIN], [2.0 MIN],

Select the length of the playback time.

COLOUR (Only for DEH-X3800UI)

[2.5 MIN], [3.0 MIN], [OFF]

[KEY COLOUR], [DISP COLOUR],

Select color for the keys/display of the unit from

FLASH AREA

[BOTH COLOUR]

12 preset colors, [SCAN] or [CUSTOM]*.

[KEY/DISPLAY], [KEY], [OFF] Select the area for the illumination effect.

[SCAN]: Cycle through a variety of colors

When [OFF] is selected, the color set under the

automatically.

ILLUMINATION settings (page 11) is used as the

[CUSTOM]*:

display color.

1 Press and hold the M.C. dial until the color

FLASH PATTERN

setting display appears.

2 Set the primary color (R (red)/G (green)/B

[SOUND LEVEL 1] to [SOUND LEVEL

Change the illumination effect according to

(blue)) and brightness level ([0] to [60]).

6]

the sound and bass level.

You cannot select a level below 10 for all three

The flash pattern changes according to the

of R (red), G (green), B (blue) at the same time.

sound level.

You can also customize the preset colors. Select

[LOW PASS 1] to [LOW PASS 6] The flash pattern changes according to the

one of the preset colors, then press and hold the

bass level.

M.C. dial until the color setting display appears.

[RANDOM1] The flash pattern changes randomly according

* The CUSTOM setting is only available for [KEY

to the sound level mode and low pass mode.

COLOUR] and [DISP COLOUR].

[RANDOM2] The flash pattern changes randomly according

DIM SETTING

to the sound level mode.

[SYNC ILLUMI]*, [SYNC CLOCK],

Change the display brightness.

[RANDOM3] The flash pattern changes randomly according

[MANUAL]

to the low pass mode.

* Only for DEH-X3800UI

DISPLAY FX

BRIGHTNESS

[ON], [OFF] Set the MIXTRAX special effects on/off.

[1] to [10] Change the display brightness.

The available setting ranges differ depending on

CUT IN FX

[DIM SETTING].

[ON], [OFF] Turn the MIXTRAX sound effects on/off while

ILLUMI FX (Only for DEH-X3800UI)

manually changing the tracks.

[ON], [OFF] The illumination effect can be seen when a CD is

inserted/ejected.

The illumination effect will activate when the

ACC power is turned on/off regardless of this

setting.

MIXTRAX settings

(Only for DEH-X3800UI)