Vitek VT-1210: ENGLISH

ENGLISH: Vitek VT-1210

ENGLISH

of fabric), the (9) indicator will light up.

Set the temperature regulator (11) to the

When the soleplate temperature (13)

required ironing temperature: “•••” or

reaches the desired temperature value,

max”, the (9) indicator will light up.

the (9) indicator will go out, you can start

When the soleplate temperature (13)

ironing.

reaches the desired temperature point,

the (9) indicator will go out, you can start

Note: While steam ironing set the tem-

ironing.

perature «•••» or «МАХ».

Turn the steam supply regulator (3) to set

the intensity of steaming, steam will start

WATER SPRAYER

outgoing from the openings of the sole-

You can dampen the fabric by pressing

plate (13).

the spray button (4) several times.

When you finish ironing set the (11) regu-

Make sure that there is enough water in

lator to the “min” position and the steam

the water tank (10).

supply regulator (3) to the left position.

Pull the plug out of the socket and let the

IRONING

iron cool down completely.

Place the iron on the base (8).

Insert the power plug into the outlet.

ATTENTION!

Set the temperature regulator (11) to the

If during the operation steam is not con-

required ironing temperature: “”, “••”,

stantly supplied, check whether the tem-

•••” or “max” (depending on the type

perature regulator (11) is set properly.

of fabric), the (9) indicator will light up.

When the soleplate temperature (13)

ADDITIONAL STEAM RELEASE

reaches the desired temperature point,

Additional steam release function is useful

the (9) indicator will go out, you can start

when ironing folds and can only be used at

ironing.

high ironing temperatures (when the iron

• When you finish ironing set the (11) regu-

temperature regulator (11) is set to “•••

lator to the “min” position.

or “max”).

Pull the plug out of the socket and let the

When the additional steam release but-

iron cool down completely.

ton (5) is pressed, steam will be vigor-

ously released from the openings in the

STEAM IRONING

iron soleplate.

For steam ironing set the temperature reg-

ulator to «•••» or «МАХ». The iron has an

Note: In order to avoid leakage of water

anti-drop valve, which stops water supply,

from steam openings, press the addi-

when the soleplate temperature is too low

tional steam supply button (5) with 4-5

it prevents the appearance of drops out of

sec. interval.

the soleplate openings (13). While heat-

ing or cooling down of the soleplate (13),

STEAM CHAMBER CLEANING

you will hear clicks of opening/closing of

To prolong lifetime of the iron we recom-

the anti-drop valve it means that the valve

mend cleaning the steam chamber, espe-

works normally.

cially in the regions with “hard” water.

Place the iron on the base (8).

Set the steam supply regulator (3) to the

Insert the power plug into the outlet.

steam release OFF position.

Make sure that there is enough water in

Fill the water tank (10) till the MAX mark

the water tank (10).

(12).

6

VT-1210.indd 6VT-1210.indd 6 22.07.2009 17:18:3622.07.2009 17:18:36