Pioneer deh-2700ui: Getting Started

Optional remote control

Getting Started

The remote control CD-R320 is sold separately.

Basic operation

Frequently used operations

The available buttons vary depending on the unit.

DEH-X3700UI

* When this unit’s blue/white lead is connected to the vehicle’s auto-antenna relay control terminal,

the vehicle’s antenna extends when this unit’s source is turned on. To retract the antenna, turn the

source off.

Display indication

DEH-2700UI

* This button is referred to as DISP in the manual.

4En

Purpose Operation

Turn on the power* Press SRC/OFF to turn on the power.

Press and hold SRC/OFF to turn off the

power.

Adjust the volume Turn the M.C. dial.

Select a source Press SRC/OFF repeatedly.

Change the display information Press DISP repeatedly.

Return to the previous display/list Press /DIMMER.

Return to the normal display from the menu Press BAND/.

Indication Description

Appears when a lower tier of the menu or folder exists.

Appears when the button is pressed.

Appears when the local seek tuning function is set (page 9).

Appears when a traffic program is received.

Appears when traffic announcements are received (page 9).

Appears when the sound retriever function is set (page 10).

Appears when random/shuffle play is set.

Appears when repeat play is set.

Appears when the iPod control function is set (page 8).

3 [QUIT :YES] appears when all the settings have been made.

Detaching the front panel

To return to the first item of the setup menu, turn the M.C. dial to select [QUIT :NO],

Detach the front panel to prevent theft. Remove any cables and devices attached to the

then press to confirm.

front panel and turn off the unit before detaching it.

4 Press the M.C. dial to confirm the settings.

NOTES

English

• You can cancel the menu setting by pressing SRC/OFF.

• These settings can be made at any time from the SYSTEM settings (page 10) and INITIAL settings

(page 5).

1 Press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [SYSTEM], then press to confirm.

Important

3 Turn the M.C. dial to select [DEMO OFF], then press to confirm.

• Avoid subjecting the front panel to excessive shock.

• Keep the front panel out of direct sunlight and high temperatures.

4 Turn the M.C. dial to select [YES], then press to confirm.

• Always store the detached front panel in a protective case or bag.

Setup menu

When you turn the ignition switch to ON after installation, [SET UP :YES] appears in the

1 Press and hold SRC/OFF until the unit turns off.

display.

2 Press and hold SRC/OFF to display the main menu.

1 Press the M.C. dial.

3 Turn the M.C. dial to select [INITIAL], then press to confirm.

The setup menu disappears after 30 seconds of no operation. If you prefer not to set

at this time, turn the M.C. dial to select [NO], then press to confirm.

4 Turn the M.C. dial to select an option, then press to confirm.

2 Turn the M.C. dial to select the options, then press to confirm.

NOTE

To proceed to the next menu option, you need to confirm your selection.

The options vary depending on the unit.

Menu Item Description

LANGUAGE Select the language to display the text information from a

compressed audio file.

[ENG](English),

[РУС](Russian),

[TUR](Turkish)

CLOCK SET Set the clock.

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

5En

Canceling the demonstration display (DEMO OFF)

INITIAL settings

Menu Item Description

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

[100], [50]

SP-P/O MODE Select when there is a full-range speaker connected to the rear

speaker output leads and there is a subwoofer connected to the

[REAR/SUB.W]

RCA output.

[SUB.W/SUB.W] Select when there is a passive subwoofer connected directly to

the rear speaker output leads and there is a subwoofer

connected to the RCA output.