Pioneer CP-2EX: Attaching speakers to the stands

3

En

English

Using the spikes

The speaker stands include spikes that you can use to isolate

the speaker from the floor. Spikes are recommended when

placing the stand on a thick carpet (for added stability), or for

better sound when placing the stand on a hard reverberant

surface (such as a concrete or wood floor). Use the supplied

spike bases to avoid scratching the floor or other surface

where the stand is placed.

Spike

1

2

Nut

Stand base plate

1

Attach the spikes to the nuts provided.

2

Attach all four spikes to the threaded metal inserts

at the base of the speaker stand.

3

Choose the location for speaker placement then put

the spike bases on the floor.

4

Place the stand so that the spikes are resting on the

spike bases on the floor.

Before placing the speaker on the speaker stand, make sure

the stand is stable and resting squarely on all four spikes.

• Note that these spikes are sharp metal and can cause

damage to flooring. Make sure to lay down a cloth or

suitable base before setting up.

• The spike bases should be placed as shown below (with

the depression on the top side).

• Make sure to use the spike bases provided to avoid

damaging the surface where you place the stand.

Attaching speakers to the stands

To avoid accident or injury, please use screws to secure the

speakers to the speaker stands.

Assembly with the S-2EX speaker system

If you are using the S-2EX speaker system, note that there is

a fastening nut provided on the speaker base (see below).

When using speaker spikes:

Place the speaker spike bases in the four holes provided on

the speaker support, then secure the speaker to the speaker

support using the washer, spring washer and the 62 mm

screws as shown below.

(SBA6050)

Speaker 

base

Speaker

support

Washer (SBE6006)

Speaker

spike base

Fastening nut

Spring washer 

(SBE6005)

Screws 

(Bind head, M5xL62)

62 mm

Black

Screw holes 

for securing

speaker

When not using speaker spikes:

Secure the speaker to the speaker support using the washer,

spring washer and the 36 mm screws as shown below.

(SBA6048)

Speaker 

base

Speaker

support

Washer (SBE6006)

Fastening nut

Screws 

(Bind head, M5xL36)

36 mm

Black

Screw holes 

for securing

speaker

Spring washer 

(SBE6005)