Главная > Инструкция к Кухонному Комбайну Philips HR7758 > “ button is pressed

Philips HR7758: “ button is pressed

“ button is pressed: Philips HR7758

ENGLISH14

want to prepare a large quantity, process small

Citrus press

batches of ingredients instead of trying to

process a large quantity at once.

The citrus press can be used for all kinds of citrus

◗ Hard ingredients e.g. soy beans for soy milk,

fruit.

must be soaked in water before they are

processed.

C

1 Put the bowl on the motor unit and place

◗ Crush ice cubes by putting the ice cubes in

the sieve on the bowl.

the jar, closing the lid and using the pulse

function.

C

2 Turn the sieve in the direction of the

arrow until the peg of the safety lock snaps

If ingredients stick to the wall of the blender jar:

home in the motor unit.

1 Switch the appliance off and unplug it.

2 Open the lid.

C

3 Place the cone on the sieve by pressing it

lightly down.

Never open the lid while the appliance is still

Make sure that the screw cap is attached.

running.

3 Use a spatula to remove the ingredients

from the wall of the jar.

C

4 Press the “ button on the control panel.

Keep the spatula at a safe distance from the

The process speed can be increased up to 3 times

blades (approx. 2 cm).

by pressing the + button.

The process starts when the

“ button is pressed

◗ If you are not satisfied with the result, let the

and stops when the stop button is pressed.

appliance run briefly a number of times by

pressing the pulse button.You can also try to

get a better result by stirring the ingredients

with a spatula (not while the blender is

running), or by pouring some of the contents

out in order to process a smaller amount.

◗ In some cases the ingredients are easier to

blend if you add some liquid, e.g. lemon juice

when blending fruits.

1

2

CLICK

1

ENGLISH 15

C

5 Press a half of a fruit firmly onto the

rotating cone.

Tips

◗ Stop pressing from time to time to remove

the pulp from the sieve.

Switch off the appliance and take off the bowl

with the sieve and cone on it when you want to

remove the pulp.

C

◗ When you have finished pressing, remove the

bowl with the sieve and cone on it to prevent

juice from leaking onto the appliance.

Meat mincer

The meat mincer can be used for mincing meat

and making sausages.

C

1 Assemble the gear housing onto the

motor unit by placing it on the driving

shaft (1) and turning it to the left (2).

You will hear a click when you have assembled

this part correctly.

C

2 Assemble the cutter housing onto the gear

housing by turning it to the left until you

hear a click.

2

1

C

3 Insert the worm shaft into the cutter

housing, the plastic end first.

4 Place the cutter unit onto the worm shaft.

Make sure the cutting edges of the cutter unit are

pointing outwards.

C

5 Then assemble the medium grinding disc

or coarse grinding disc onto the worm

shaft.Which disc you choose depends on

the consistency you want.

Make sure the notches of the grinding disc fit

onto the projections of the cutter housing.

C

6 Fasten the screw ring onto the cutter

housing by turning it in the direction of the

arrow until it is properly fastened.

C

7 Place the tray on the upright part of the

cutter housing.

Make sure that the screw cap is attached.

Mincing meat

1 Cut the meat into 10cm-long, 2cm-thick

strips.

2 Remove bones, pieces of gristle and sinews

as much as possible.

Never use frozen meat!

Оглавление

Топ 10 инструкций

Другие инструкции

Philips HR7745 Philips HR7745 Philips HR7755 Philips HR7755 Philips HR7765 Philips HR7765 Philips HR7766 Philips HR7766