Pioneer DEH-2910MP: Operating this unit

Section

Operating this unit

02

English

7 RPT indicator

Turning the unit off

Shows when repeat play is turned on.

% Press SOURCE and hold until the unit

8 LOUD indicator

turns off.

Appears in the display when loudness is

turned on.

Tuner

9 Stereo (5) indicator

Shows when the selected frequency is

Listening to the radio

being broadcast in stereo.

1 Press SOURCE to select the tuner.

a LOC indicator

2 Press BAND to select a band.

Shows when local seek tuning is on.

Press BAND until the desired band (F1, F2 for

FM or MW/LW) is displayed.

Basic Operations

3 To perform manual tuning, briefly press

c or d.

Turning the unit on and

4 To perform seek tuning, press and hold

selecting a source

c or d for about one second and release.

You can select a source you want to listen to.

The tuner will scan the frequencies until a

To switch to the built-in CD player, load a disc

broadcast strong enough for good reception is

in the unit (refer to page 10).

found.

% Press SOURCE to select a source.

# You can cancel seek tuning by briefly pressing

Press SOURCE repeatedly to switch between

c or d.

the following sources:

# If you press and hold c or d you can skip sta-

Tuner—Built-in CD player—AUX

tions. Seek tuning starts as soon as you release

the button.

Notes

! In the following cases, the sound source will

Storing and recalling broadcast

not change:

frequencies

— When there is no disc in the unit.

% When you find a frequency that you

— When the AUX (auxiliary input) is set to off

want to store in memory, press one of pre-

(refer to page 14).

set tuning buttons 1 to 6 and hold until the

! AUX is set to on by default. Turn off the AUX

preset number stops flashing.

when not in use (refer to Switching the auxili-

Memorized radio station frequency can be re-

ary setting on page 14).

called by pressing the preset tuning button.

! When this unit’s blue/white lead is connected

# Up to 12 FM stations, 6 for each of the two FM

to the vehicle’s auto-antenna relay control

bands, and 6 MW/LW stations can be stored in

terminal, the vehicle’s antenna extends when

memory.

this unit’s source is turned on. To retract the

# Press a or b to recall radio station frequen-

antenna, turn the source off.

cies.

Adjusting the volume

% Use VOLUME to adjust the sound level.

7

En