Pioneer DEH-1200MP: Operating this unit Other Functions

Section

02

Operating this unit

Other Functions

TITLE (multi language)

This unit can display the text information of a com-

Important

pressed audio file even if they are embedded in a

Power save mode is cancelled if the vehicle bat-

Western European or Russian language.

! If the embedded language and the selected lan-

tery is disconnected and will need to be turned

guage setting are not the same, text information

back on once the battery is reconnected. When

may not be displayed properly.

power save is off, depending on connection meth-

! Some characters may not be displayed properly.

ods, the unit may continue to draw power from

1 Press c or d to select the language.

the battery if your vehicle's ignition switch doesn't

EUR (European )—RUS (Russian)

have an ACC (accessor y position).

Using the AUX source

Adjusting initial settings

1 Insert the stereo mini plug into the

1 Press SRC/OFF and hold until the unit

AUX input jack.

turns off.

2 Press SRC/OFF to select AUX as the

2 Press SRC/OFF and hold until function

source.

name appears in the display.

3 Press F (function) to select the initial

Sound muting

setting.

After selecting, perform the following proce-

Sound is muted automatically when:

dures to set the initial setting.

! A call is made or received using a cell

phone connected to this unit.

FM (FM tuning step)

! Voice guidance is output from a connected

Pioneer navigation unit.

Normally the FM tuning step employed by seek tuning

is 50 kHz. When AF or TA is on, the tuning step auto-

The sound is turned off, MUTE is displayed

matically changes to 100 kHz. It may be preferable to

and no audio adjustments, except volume con-

set the tuning step to 50 kHz when AF is on.

trol, are possible. Operation returns to normal

! The tuning step remains at 50 kHz during manual

when the phone connection or the voice gui-

tuning.

dance is ended.

1 Press c or d to select the FM tuning step.

50 (50 kHz)—100 (100 kHz)

A-PI (auto PI seek)

The unit can automatically search for a different sta-

tion with the same programming, even during preset

recall.

1 Press a or b to turn Auto PI seek on or off.

AUX (auxiliary input)

Activate this setting when using auxiliary device con-

nected to this unit.

1 Press a or b to turn auxiliary setting on or off.

SAVE (power saving)

Switching this function on enables you to reduce the

consumption of battery power.

! Turning on the source is the only operation al-

lowed when this function is on.

1 Press a or b to turn the power save on or off.

8

En