Karcher Balayeuse KM 130-300 R Bp: Transport Storage Shutdown

     - 

6

Caution

Do not sweep up packing strips, wire or 

similar objects as this may damage the 

sweeping mechanism.

Note:

 To achieve an optimum cleaning re-

sult, the driving speed should be adjusted 

to take specific situations into account.

Note:

 During operation, the dust filter 

should be shaken off and cleaned at regu-

lar intervals.



Switch on the blower.



Set the programme switch to sweep 

with sweeping brush when cleaning 

surfaces.



Set the programme switch to sweep 

with sweeping brush and side brush 

when cleaning edges.



Switch off the blower.



Set the programme switch to sweep 

with sweeping brush when cleaning 

surfaces.



Set the programme switch to sweep 

with sweeping brush and side brush 

when cleaning edges.



Danger

Risk of injury! When emptying the waste 

container, care should be taken to ensure 

that no persons or animals are within its 

swivelling range.



Danger

Danger of crushing. Never reach into the 

rod assembly for the drainage mechanism. 

Stay away from the area under the raised 

container.



Danger

Danger of tipping. Place the machine on an 

even surface during emptying.



Set programme selection switch to 

"Transport drive". 

.



Raise waste container.



Slowly drive towards the collection con-

tainer.



Lock parking brake.



Open the container door: Press the left 

side of the switch and empty the waste 

container.



Close the container door: Press the 

right side of the switch (approximately 2 

seconds), until the unit is tilted to the 

end position.



Release parking brake.



Drive away the collection container 

slowly.



Lower the waste container up to the 

end-position.



Press brake pedal and keep it de-

pressed.



Lock parking brake.



Turn ignition key to "0" and remove it.



Danger

Risk of injury and damage! Observe the 

weight of the appliance when you transport 

it.



Turn ignition key to "0" and remove it.



Lock parking brake.



Secure the appliance at the lashing 

points (4x) using tension belts, ropes or 

chains.



Secure the wheels of the machine with 

wheel chocks.



When transporting in vehicles, secure 

the appliance according to the guide-

lines from slipping and tipping over.



Danger

Risk of injury and damage! Note the weight 

of the appliance in case of storage.

If the sweeper is going to be out of service 

for a longer time period, observe the follow-

ing points:



Park the sweeper on an even surface.



Set programme selection switch to 

"Transport drive". 

.



Turn ignition key to "0" and remove it.



Lock the sweeper to ensure that it does 

not roll off. 



Clean the inside and outside of the 

sweeper.



Park the machine in a safe and dry 

place.



Remove the battery plug from machine.



Charge battery and recharge it approx. 

every 2 months.

Sweeping mode

Sweeping dry floors

Sweeping damp or wet floors

Emptying waste container

Turn off the appliance

Transport Storage Shutdown

19 EN