Karcher PC 60-130 T: Maintenance and care

     - 

6 

Danger

Risk of injury! The main switch is to be switched off while carrying out any repairs or maintenance jobs.

1 Shavings sieve

Î

Pull the shavings sieve out toward the 

top and clean it under running water.

You can enter into a maintenance contract 

with the concerned Kaercher Sales Office 

for the machine. 



Danger

Scalding danger! The detergent liquid must 

have cooled down completely before drain-

ing it off.

Î

Open the drain-off tap on the lower side 

of the device.

Î

Drain off the detergent liquid.

Î

Add new detergent liquid; see section 

on start-up. 

Î

Turn off the appliance. 

Î

Turn the filter using a filter spanner.

Î

Take out the filter inlay.

Î

Clean or replace the filter inlay. 

Î

Install a new filter inlay.

Î

Tighten the filter again.

Maintenance and care

Maintenance schedule

Time

Activity

Assembly affected

Performance

of whom

daily

Check function

Safety button

Briefly open the machine hood with the machine 

running (caution, steam!). The pump and the 

turntable must switch off. If this is not the case, 

turn the device off and inform Customer Service.

Operator

Check filling level. Fill level indicator in the deter-

gent container

Refill water.

Operator

Oil collection basin

Dispose off the oil according to applicable regu-

lations.

Operator

Check small 

parts and shav-

ings sieve.

Small parts and shavings sieve Clean small parts and shavings sieve.

Operator

weekly or after 40 

operating hours

Visual inspection Hoses, pump.

Check the hoses inside and outside of the ma-

chine and the pump for leaks.

Call customer service in case of leaks.

Operator

Check filter (op-

tional).

Filter after the pump.

Install a new filter inlay.

Operator

Check function

Rotating plate

Check the turntable for easy movement.

Call customer service in case of unsmooth 

movement.

Operator

Visual inspection Nozzles in the nozzle pipes.

Replace damaged or worn out nozzles immedi-

ately.

Operator

monthly or after 200 

operating hours

Check deter-

gent liquid.

Water container, filter and noz-

zle pipes.

Replace detergent fluid as required. Clean the 

water container, filter and nozzle pipes.

Operator

half-yearly or after 

1000 operating 

hours

check, clean

Entire device.

Visual inspection of the device; check hoses and 

connections to see that they are not leaky.

Customer 

Service

Clean the shavings sieve

Maintenance contract

Maintenance Works

Replacing detergent liquid

Do not let the polluted detergent liquid 

come untreated in contact with soil, water 

or the sewage system.  Please follow the 

corresponding regulations in the respec-

tive country. 

Cleaning the filter (optional)

16 EN