AEG TS 250 K: English

English: AEG TS 250 K

Do not use any flanges other than those supplied or indicated in the

εůIσTEσůσűE

instruction manual to secure the saw blade.

Refrain from removing any cut-offs or other parts of the workpiece

Clean out sawdust from the interior of the saw to prevent a potential

from the cutting area whilst the machine is running and the saw

fire hazard. Do not use saw blades which are damaged or deformed.

head is not in the rest position.

Use only AEG accessories and AEG spare parts. Should components

Ensure that the machine is always stable and secure (e.g. fixed to

need to be replaced which have not been described, please contact

a bench)

one of our AEG service agents (see our list of guarantee/service

addresses).

Long workpieces must be adequately supported.

If needed, an exploded view of the tool can be ordered. Please state

Do not use cracked or distorted saw blades.

the Article No. as well as the machine type printed on the label

Stock having a round or irregular cross section (such as firewood)

and order the drawing at your local service agents or directly at:

must not be cut, as it can not be securely held during cutting. When

AEG Elektrowerkzeuge, Max-Eyth-Straße 10, D-71364 Winnenden,

sawing thin stock layed on edge, a suitable auxilary fence must be

Germany.

used for firm support.

Transport and store the tools in a suitable receptacle;

SВεŰτδS

Only use tools that meet standard EN 847-1.

To minimise noise, the tool must be sharpened and all noise

Please read the instructions carefully before starting

reducing elements (covers etc.) must be properly adjusted.

the machine.

Cutting rebates or grooves is only permitted with a suitable

protective device fi tted, e.g. a protective tunnel over the saw table.

Always disconnect the plug from the socket before

Do not use circular saws for cutting slots (grooves in workpiece).

carrying out any work on the machine.

Do not use the top protective cover as a handle for transportation!

GB

Before transporting the machine, make sure that the top protective

Wear ear protectors!

guard covers the top section of the saw blade.

In spite of compliance with all relevant design regulations, dangers

may still present themselves when the machine is operated, e.g.:

Always wear goggles when using the machine.

- workpiece parts being thrown off,

- parts of damaged tools being thrown off,

- noise emissions,

Always keep hands away from the path of the saw

- wood dust emissions.

blade.

SPEűIŻIEDΝűτσDITIτσSΝτŻΝUSE

Use this circular saw to cut only wood and wood like products.

Never expose tool to rain.

Do not use this product in any other way as stated for normal use.

Danger

EűάDEűδůRůTIτσΝτŻΝűτσŻτRεITВ

We declare under our sole responsibility that this product is

in conformity with the following standards or standardized

Do not dispose of electric tools together with

documents.

EN 61029, EN 55014-1, EN 55014-2,

household waste material! In observance of

EN 61000-3-2, EN 61000-3-3,

in accordance with the regulations

European Directive 2002/96/EC on waste electrical

2006/42/EC, 2004/108/EC

and electronic equipment and its implementation

in accordance with national law, electric tools that

have reached the end of their life must be collected

separately and returned to an environmentally

Rainer Kumpf

compatible recycling facility.

Winnenden, 2010-02-22

Manager Product Development

Authorized to compile the technical file.

Accessory - Not included in standard equipment,

εůIσSΝűτσσEűTIτσ

available as an accessory.

Connect only to single-phase a.c. current and only to the

system voltage indicated on the rating plate. It is also possible

to connect to sockets without an earthing contact as the design

conforms to safety class II.

English