Karcher Balayeuse KM 100-100 R D: Accessories

     - 

10

Î

Remove the filter inlay and check it.

Î

Use either a new or cleaned filter car-

tridge in the vacuum container.

Î

Screw on wing nut.

Note

The machine has two hydraulic circuits: 

Circuit sweeping hydraulics

Î

Check the hydraulic oil level on the stor-

age container.

The oil level must lie between “MIN“ 

and “MAX“ marking.

Î

If the oil level is too low, fill in hydraulic 

oil above the fill neck on the top of the 

container.

Circuit axle drive

Caution

This inspection may only be carried out 

when the engine is cold.

Î

Check oil level in the equalisation con-

tainer.

Î

If required, top up oil carefully.

Check hydraulic oil level and refill hy-

draulic oil

Accessories

Side brushes

6.905-986.0

With standard bristles for indoor and out-

door areas. 

Side-brushes, soft

6.906-133.0

For fine dust on inside surfaces; wetness 

resistant.

Hard side-brushes

6.906-065.0

For removing stubborn dirt in the external 

area; resistant to moisture. 

Standard sweep roller 6.906-375.0

Resistant of wear and moisture.  Universal 

bristles for inside and outside cleaning. 

Roller-brush, soft

6.906-533.0

With natural bristles especially for fine 

dust sweeping on smooth indoor floors. 

Not resistant to wetness; not for abrasive 

surfaces. 

Roller-brush, hard

6.906-532.0

For removing stubborn dirt in the external 

area; resistant to moisture. 

Dust filter

6.414-532.0

25 EN