AEG srp 4354 bt: English

English: AEG srp 4354 bt

48

English

• Insert2batteriesoftypeR03“AAA”1.5V.Checkthatthe

4. Use the TUN.- / TUN.+ buttons to select the “USB”,

polarity is correct (see battery compartment).

“CD”, “RADIO” function. Press the TIMER button again.

• Closethebatterycompartment.

The time is set. “TIMER” appears in the display.

If the remote is not in use for a lengthy period of time, please

CAUTION:

remove the battery to prevent the battery acid from “leaking”.

If you selected the “CD” or the “USB” function: Insert a CD

WARNING:

or plug in a USB stick so that the device can work.

• Thebatteryshallnotbeexposedtoexcessiveheat

Set a station to the “RADIO” function.

such as sunshine, fire or the like. Danger of explosion!

• Keepbatteriesoutofthereachofchildren.Theyare

Setting the sleep timer SLEEP (in operating mode)

not toys.

You may have the device automatically turn off after 10 to 90

• Donotforcebatteriesopen.

minutes.

• Avoidcontactwithmetallicobjects.Rings,nails,screws

etc.) Danger of short circuits!

1. Press the SLEEP button during any optional operation.

• Shortcircuitsmayoverheatorevenignitebatteries.

“90” and “SLEEP” will blink in the display.

This may lead to combustion.

2. Press the SLEEP button repeatedly to set a time between

• Whentransportingthebatteries,covertheterminalsfor

90 and 10 minutes or “OFF”.

your safety with an adhesive strip.

3. Once the desired switch-off time has been set, leave the

• Ifabatteryleaks,donotrubtheuidintotheeyesor

menu without any other touch of a button. “SLEEP” ap-

the skin. If acid comes into contact with the eyes, rinse

pears in the display.

with purified water and seek medical advice if symp-

toms persist.

General operation

CAUTION:

NOTE:

Batteries must not be disposed of in the garbage. Please

Some buttons you will find on both the device and the

bring used batteries to competent collection centers or

remote control. Buttons with the same name result in

back to the dealer.

the same functions.

Turning the device on/ off

POWER/STANDBY

• Pressthe

button to turn the device on or off.

Press

POWER/STANDBY button to switch the device into

standby mode. Press this button again to turn on the device.

Setting the clock (during standby mode)

1. Press the SET/PAIR/ID3 button. “RTC 24” appears in the

NOTE: In the BLUETOOTH, USB, AUX and CD Mode

display.

Afterapprox.15minuteswithoutasignal,thedeviceauto-

2. Use the TUN.-

/ TUN.+ button to select between

matically switches to standby.

24-hour and 12-hour display setting. Confirm with SET/

PAIR/ID3.

Volume

NOTE:

Adjust to your preferred volume level. The display will show

The 12-hour setting will result in the following display

“VOL” and a number. This will equal to the set volume of

AM = morning, PM = afternoon.

“VOL 30” or “VOL 00”.

3. Use TUN.-

/ TUN.+ buttons to set the hours. Con-

Infrared remote control

firm with SET/PAIR/ID3.

Wireless operation from a distance of up to 5 meters. If this

4. Use TUN.- / TUN.+ buttons to set the minutes.

range gets less, please change the battery. Make sure there

5. Press SET/PAIR/ID3 again in order to save the time set-

are no obstacles between the remote control and the sensor

tings.

on the device during operation.

Setting the TIMER (in standby mode)

AUX IN jack (21)

The TIMER is used to turn on the device at a time set by you.

Connect analogue playback devices. When connecting to

1. Keep the TMER button pressed. “TIMER” appears in the

this jack you may also listen to the audio of other devices,

display and the hour digits blink.

such as MP3 or CD players etc., via the speakers.

2. Press the TUN.-

/ TUN.+ buttons to set the hours.

1. Pleaseconnecttheexternaldevicevia3.5mmplugjack

Press the TIMER button again.

to the AUX IN jack.

3. Press the TUN.-

/ TUN.+ buttons to set the minutes.

2. Now use the FUNCTION button to select the AUX

Press the TIMER button again.

mode.