AEG sr 4359 bt: English

50

English

PROG./P-MODE (19)

4. Press the /PAIR button (16). The playback starts.

• In stop mode for programming any order of tracks (see

The notification “PROG” will appear additionally in the

the section on “Programmed Play”).

display.

5. Press once the STOP button to stop the playback while

During the playback of an audio CD:

retaining the program.

Press once = the current track is repeated continu-

6. To play the programme back again, press the /PAIR

ously. The symbol “

” appears on the

button.

display.

7. To delete the program, press the STOP button twice.

Press twice = the whole CD is played continuously.

The notification “PROG” will disappear.

The symbol “ ALL” appears on the

display.

The device stops automatically after all programmed titles

Press three times = All the music tracks are played back in

have been played. The listed sequence remains in the

random order. The notification “RAN”

memory until you switch to a different operating mode.

appears on the display.

Press four times = each track is played for 10 seconds

Playing back Music in MP3 Format

respectively. The message “INTRO”

appears in the display.

With this device it is possible to play back pieces of music in

Press ve times = all functions are cancelled. The normal

MP3 format. The device also supports all standard CD types:

play mode is resumed.

CD, CD-RW, CD-R.

During playback of MP3 music:

This machine of is able to play MP3 CDs. Up to 200 tracks

Press once = the current track is repeated continu-

can be compressed and stored on these CDs. Your machine

ously. The symbol “

” appears on the

detects an MP3 CD automatically (the total number of tracks

display.

and MP3s appears in the display). If you would like to play

Press twice = the selected folder is repeated continu-

one of these CDs, proceed as described under “Playing

ously ( DIR appears in the display).

CDs/MP3”. Tracks can be programmed as described under

Press three times = all music titles are repeated continu-

“Playing Back Programmed Tracks”.

ously (The symbol “ ALL” appears on

the display.).

Please note:

Press four times = all the music tracks are played back in

There are a number of different recording and compression

random order. The notification “RAN”

methods, as well as quality differences between CDs and self-

appears on the display.

recorded CDs.

Press ve times = each track is played for 10 seconds

Furthermore, the music industry does not adhere to xed

respectively. The message “INTRO”

standards (copy protection).

appears in the display.

Press six times = all the functions are deactivated. Play-

For these reasons it is possible that in rare cases there are

back is continued normally.

problems with the playback of CDs and MP3 CDs. This is not

a malfunction of the device.

Programmed Play

AUX IN socket

This can be used to program any desired sequence of tracks.

(Only in CD-/USB-/CARD mode)

To connect analogue replay devices. Via this socket you can

also hear the sound of other playback devices such as MP3

1. Press the

STOP button (17).

players, CD players etc. through the loudspeakers.

2. Press the PROG./P-MODE button (19). “P01” (Storage

space) and the notification “PROG” will appear in the

1. Please connect the external device with a 3.5 mm stereo

display. Use the /+10 / /-10 buttons (18) to select the

jack plug to the AUX-IN socket.

desired track and then press the PROG./P-MODE button

2. Repeatedly press the FUNC button (21), until “AUX” is

again. The display changes to memory slot P02.

shown in the display.

3. Select the next track with the /+10 / /-10 buttons

3. You will hear the sound playback from the external device

and press the PROG./P-MODE button again. Repeat the

through the loudspeakers. You may use the VOLUME

procedure until all the desired tracks are selected.

control (1) to adjust the volume. The CD buttons are not

functional.

NOTE:

4. For the remaining procedure please see the operating

Once the storage capacity of the tracks to be pro-

instructions of the external sound source.

grammed has been reached “FULL” flashes in the

display.