AEG sr 4359 bt: English

English

49

4. Now enter the password “0000” in your player, depend-

CAUTION:

ing on the device manufacturers, model, and software

Switch the device to a different operating mode before you

version.

remove the USB storage device.

If pairing was done successfully, the PAIR/STANDBY control

lamp lights up blue. For the further procedure, please refer

to the user manual of the playback unit. If possible, adjust the

To play music via an SD memory card (13)

volume of the external unit to a comfortable level.

1. Press the FUNC button (21) repeatedly until “CARD” is

NOTE:

shown on the display.

• Depending on the device manufacturer, you need to

2. Insert the memory card into the intended opening. The

perform the registration (PAIRING) again to connect the

contacts must face downward. Playback will automatically

devices.

start after a few seconds.

• In case of problems with the registration of a replay

For operation, please refer to the section “Description of the

device, deactivate the WiFi-/ and mobile data function

control buttons”.

in your playback device.

• The Bluetooth compatibility cannot be ensured for

CAUTION:

devices (e.g. mobile phones) getting released in the

Switch the device to a different operating mode before you

future.

remove the memory card.

• To ensure an optimal connection, make sure that the

battery of your player is completely charged.

• Some of the mobile phone brands have an energy-sav-

Description of the control buttons

ing mode. Deactivate the energy-saving mode as it can

otherwise result in problems during the data transfer

NOTE:

through Bluetooth.

Not all the functions may be supported depending on the

• To be able to transfer audio data, Bluetooth needs to

playback device.

stay activated in your player. Observe the operation

manual of your player.

/PAIR (16)

• If a mobile phone on which you are playing music

You can briefly interrupt and resume playback using this

receives a call, the music will be interrupted. However,

button. The notification on the display flashes. Pressing again

the sound is not played back by the device. After you

continues playback.

have ended the call, the devices are connected to each

other again and playback continues.

/+10 / /-10 (18)

During music playback:

Playing music via USB (11)

With

/+10 you can jump to the next or previous track etc.

• If the button is kept pressed down, the machine starts to

This device has been developed in line with the latest techni-

search through the tracks.

cal advances in the USB field. The wide range of different

USB storage devices of all types which are currently on the

The

/-10 button can be used as follows:

market, unfortunately do not allow us to guarantee full com-

Press once = This starts the current track again from

patibility with all USB storage devices. For this reason, in rare

the beginning.

cases there may be problems in playing back files from USB

Press twice = This jumps back to the previous track.

storage devices. This is not a malfunction of the device.

Press three times = This plays the song before etc. If the

1. Press the FUNC button (21) repeatedly until “USB” is

button is kept pressed down, the

shown on the display.

machine starts to search through the

2. Connect a USB storage device directly into the port.

tracks.

Playback will automatically start after a few seconds.

For operation, please refer to the section “Description of the

In stop mode:

control buttons”.

Press one of the buttons repeatedly to skip forward, respec-

NOTE:

tively back by 10 tracks each. The prerequisite is that more

• Always directly connect a USB storage medium to the

than 10 tracks are available.

USB port to prevent any malfunctions.

• The USB port is not designed for charging external

STOP (17)

devices.

The playback is stopped.