AEG SR4356 BT: English

English

39

NOTE:

NOTE:

Once the storage capacity of the tracks to be pro-

Adjust the volume of the external device to a comfortable

grammed has been reached “FUL” flashes in the

level.

display.

4. Press the

button (5). The playback starts. The notifica-

Cleaning and Maintenance

tion “P” will appear additionally in the display.

5. Press once the button to stop the playback while retain-

WARNING:

ing the program.

Do not immerse the device in water.

6. To play the programme back again, press the button.

7. To delete the program, press the button twice. The

• Always remove the mains plug before cleaning the

notification “P” will disappear.

machine.

• Any marks on the surface can be wiped off with a slightly

The device stops automatically after all programmed titles

damp cloth without any additives.

have been played. The programmed sequence is deleted

from the memory.

Troubleshooting

Playing back Music in MP3 Format

Symptoms Course Solution

With this device it is possible to play back pieces of music in

CD can not be

CD is not inserted

Ensure that the disc is

MP3 format. The device also supports all standard CD types:

played back.

or inserted incor-

inserted with the label

CD, CD-RW, CD-R.

rectly.

facing upwards.

Batteries too weak. Insert new batteries

This machine of is able to play MP3 CDs. Up to 200 tracks

or operate the device

can be compressed and stored on these CDs. Your machine

with the mains lead.

detects an MP3 CD automatically (the total number of tracks

CD jumps dur-

Check the disc for

Check the disc for

and MP3s appears in the display). If you would like to play

ing playback.

fingerprints, dirt or

fingerprints, dirt or

one of these CDs, proceed as described under “Playing

scratches.

scratches.

CDs/MP3”. Tracks can be programmed as described under

“Playing Back Programmed Tracks”.

Device cannot

Device crashes and

Disconnect the power

be operated.

“hangs”.

supply for 5 sec. Then

Please note:

switch the device on

There are a number of different recording and compression

again.

methods, as well as quality differences between CDs and self-

No audio

The device is not

Ensure that there is a

recorded CDs.

signal during

registered with the

connection. Register

bluetooth con-

audio source.

the device with the

Furthermore, the music industry does not adhere to xed

nection.

audio source again, if

standards (copy protection).

necessary.

For these reasons it is possible that in rare cases there are

Volume too low. Increase the volume

problems with the playback of CDs and MP3 CDs. This is not

on the device.

a malfunction of the device.

Increase the volume

on the audio source.

AUX IN socket

Device can not

Registration does

Check to see if the

To connect analogue replay devices. Via this socket you can

be connected.

not work.

audio source supports

also hear the sound of other playback devices such as MP3

the A2DP protocol.

players, CD players etc. through the loudspeakers.

Audio source is

Turn on the audio

shut off.

source.

1. Please connect the external device with a 3.5 mm stereo

jack plug to the AUX-IN socket.

Bluetooth is shut

Turn on the Bluetooth

2. Repeatedly press the FUNC button (13), until “AUX” is

off on the audio

function on the audio

shown in the display.

source.

source.

3. You will hear the sound playback from the external device

Bluetooth version

Use a different play-

through the loudspeakers. You may use the VOLUME

is not supported.

back device.

control (15) to adjust the volume. The CD buttons are not

functional.

4. For the remaining procedure please see the operating

instructions of the external sound source.