AEG SR 4367 BT: English

English

49

NOTE:

Music playback via SD memory card

• Some of the mobile phone brands have an energy-sav

-

This device has been designed based on the latest technol-

ing mode. Deactivate the energy-saving mode as it can

ogy available in the field of memory cards. Nevertheless, due

otherwise result in problems during the data transfer

to the large variety of memory cards on the market today,

through Bluetooth.

we cannot guarantee full compatibility. For that reason, you

• To be able to transfer audio data, Bluetooth needs to

might experience problems in some rare cases when playing

stay activated in your player. Observe the operation

memory cards. This is not a malfunction.

manual of your player.

• If a mobile phone on which you are playing music

1. Flip the rubber cover (12) open.

receives a call, the music will be interrupted. However,

2. Press the FUNC button (1) repeatedly until “SD” is shown

the sound is not played back by the device. After you

on the display. After that, “NO DATA” appears in the

have ended the call, the devices are connected to each

display.

other again and playback continues.

3. Insert an SD memory card into the card slot. “READING”

starts flashing in the display. Playback will automatically

start after a few seconds.

Playing music via USB

For operation, please refer to the section “Description of the

control buttons”.

This device has been developed in line with the latest tech-

nical advances in the USB field. The wide range of different

CAUTION:

USB storage devices of all types which are currently on the

Switch to another operating mode before removing the

market, unfortunately do not allow us to guarantee full com-

memory card.

patibility with all USB storage devices. For this reason, in rare

cases there may be problems in playing back files from USB

storage devices. This is not a malfunction of the device. Only

Description of the control buttons (USB/

use commercially available USB sticks.

CARD/BT mode)

1. Flip the rubber cover (12) open.

2. Press the FUNC button (1) repeatedly until “USB” is

NOTE:

shown on the display. After that, “NO DATA” appears in

Not all the functions may be supported depending on the

the display.

playback device.

3. Connect a USB storage device directly into the port.

“READING” starts flashing in the display. Playback will

ST/MO/

(5)

automatically start after a few seconds.

You can briefly interrupt and resume playback using this

For operation, please refer to the section “Description of the

button. The notification on the display flashes. Pressing again

control buttons”.

continues playback.

NOTE:

• Always directly connect a USB storage medium to the

/ (2)

USB port to prevent any malfunctions.

During music playback:

• The USB port is not designed for charging external

With

you can jump to the next or previous track etc.

devices.

• If the button is kept pressed down, the machine starts to

• Please note: The USB port is only intended for playing

search through the tracks.

music from USB sticks. It only provides a low power

(100 mA) power supply. This USB port is not suitable

The

button can be used as follows:

for using external 2.5” hard drives with start-up currents

Press once

= The current track will start again from the

of up to 1100 mA. In order to play music from your

beginning.

smartphone, iPod or iPhone, connect the designated

Press twice

= This jumps back to the previous track.

AUX IN socket.

Press three times = This plays the song before etc. If the

button is kept pressed down, the

CAUTION:

machine starts to search through the

Switch the device to a different operating mode before you

tracks.

remove the USB storage device.

SCAN/ (4)

The playback is stopped.