AEG MC 4462 BT: English

44

English

Press ve times = all functions are cancelled. The normal

NOTE:

play mode is resumed.

• Always directly connect a USB storage medium to the

USB port to prevent any malfunctions.

During playback of MP3 music:

• The USB port is not designed for charging external

Press once = the current track is repeated continu-

devices.

ously. The message “REPEAT” will flash

on the display.

CAUTION:

Press twice = the selected folder is repeated continu-

Switch the device to a different operating mode before you

ously (REPEAT FOLD appears in the

remove the USB storage device.

display).

Press three times = all music titles are repeated continuously.

The message “REPEAT” is lit on the

Description of the control buttons

display.

Press four times = All the music tracks are played back in

NOTE:

random order. The notification “RAN”

Not all the functions may be supported depending on the

appears on the display.

playback device.

Press ve times = Each track will be played for 10 seconds

each. The message “INTRO” appears

on the display.

(1)

Press six times = all the functions are deactivated. Play-

You can briefly interrupt and resume playback using this

back is continued normally.

button. The notification on the display flashes. Pressing again

continues playback.

FOLD.-/-10 / FOLD.+/+10 buttons (10)

• Press one of the buttons to skip forward or backward

/ (6)

10 songs. The requirement is that more than 10 songs are

With

you can jump to the next or previous track etc.

available.

• If the button is kept pressed down, the machine starts to

• During the playback of an MP3 file: Keep one of the

search through the tracks.

buttons pressed down to switch to the next or the previ-

ous folder. The music in the selected folder is played

The button can be used as follows:

back.

Press once = This starts the current track again from

the beginning.

Programmed Play

Press twice = This jumps back to the previous track.

Press three times = This plays the song before etc. If the but-

This can be used to program any desired sequence of tracks.

ton is kept pressed down, the machine

(Only in CD-/USB mode)

starts to search through the tracks.

1. Press the

button (8).

2. Press the PROG. /P-MODE button (20). “P01” (Storage

(8)

space) and the notification “PROG” will appear in the

The playback is stopped.

display. Use the / buttons (6) to select the desired

track and then press the PROG. /P-MODE button again.

PROG./P-MODE (20)

The display changes to memory slot P02.

• In stop mode for programming any order of tracks (see

3. Select the next track with the / buttons and press the

the section on “Programmed Play”).

PROG./P-MODE button again. Repeat the procedure

During the playback of an audio CD:

until all the desired tracks are selected.

Press once = the current track is repeated continu-

NOTE:

ously. The message “REPEAT” will flash

Once the storage capacity of the tracks to be pro-

on the display.

grammed has been reached “FULL” flashes in the

Press twice = the whole CD is played continuously.

display.

The message “REPEAT” is lit on the

display.

4. Press the

button (1). The playback starts. The notifica-

Press three times = All the music tracks are played back in

tion “PROG” will appear additionally in the display.

random order. The notification “RAN”

5. Press once the button to stop the playback while retain-

appears on the display.

ing the program.

Press four times = Each track will be played for 10 seconds

6. To play the programme back again, press the button.

each. The message “INTRO” appears

7. To delete the program, press the button twice. The

on the display.

notification “PROG” will disappear.