AEG MC 4462 BT: English

English

43

NOTE:

NOTE:

• If a disc is inserted the wrong way around, respectively

• In order to disconnect an existing Bluetooth

if no disc is inserted, then the message “Cd rEAd” will

connection, press the PAIR button (17). The PAIR

blink and “NO dISC” appears on the display.

control lamp (5) flashes blue.

• Playback of CDs produced by the user cannot be

4. Now enter the password “0000” in your player, depend-

guaranteed due to the large variety of software and CD

ing on the device manufacturers, model, and software

media available.

version.

If pairing was done successfully, the PAIR control lamp lights

Playing back music via Bluetooth

up blue. For the further procedure, please refer to the user

manual of the playback unit. If possible, adjust the volume of

Bluetooth involves a technology for wireless radio connec-

the external unit to a comfortable level.

tion of devices over a short distance. Devices with Bluetooth

standard are transmitting between 2.402 and 2.480 GHz in

NOTE:

the ISM band (Industrial, Scientific and Medical). Interference

• Depending on the device manufacturer, you need to

can be caused for example by WLAN-networks, DAB radios,

perform the registration (PAIRING) again to connect the

cordless phones, or microwave ovens which work on the

devices.

same frequency band.

• In case of problems with the registration of a replay

device, deactivate the WiFi-/ and mobile data function

This device offers you the possibility to use a Bluetooth-

in your playback device.

enabled device. The functional radius is limited to approx.

• The Bluetooth compatibility cannot be ensured for

15 metres depending on the surroundings and the unit used.

devices (e.g. mobile phones) getting released in the

If your playing device supports the A2DP profile (Advanced

future.

Audio Distribution Profile) and has a music-player function,

• To ensure an optimal connection, make sure that the

then you can also wirelessly transfer music to the device. The

battery of your player is completely charged.

A2DP profile involves a multi-vendor Bluetooth profile. By

• Some of the mobile phone brands have an energy-sav-

streaming, stereo-audio signals are wirelessly transferred be-

ing mode. Deactivate the energy-saving mode as it can

tween the playing device (source) and the receiving device.

otherwise result in problems during the data transfer

To be able to remotely control the source, the playback de-

through Bluetooth.

vice must support the AVRCP profile (Audio Video Remote

• To be able to transfer audio data, Bluetooth needs to

Control Profile).

stay activated in your player. Observe the operation

manual of your player.

Due to the different device manufacturers, models, and

• If a mobile phone on which you are playing music

software versions, a full functionality cannot be guaranteed.

receives a call, the music will be interrupted. However,

the sound is not played back by the device. After you

Logging on devices (Pairing)

have ended the call, the devices are connected to each

Before you listen to music via the unit, you must pair the

other again and playback continues.

devices.

1. Ensure, that the Bluetooth function is activated in your

Playing music via USB (14)

player (e.g. mobile phone). For this, refer to the operation

manual of your player.

This device has been developed in line with the latest techni-

2. Use the FUNCTION button (18) to select BT mode. The

cal advances in the USB field. The wide range of different

indicator light PAIR will flash blue. This signalizes that the

USB storage devices of all types which are currently on the

device is in pairing mode.

market, unfortunately do not allow us to guarantee full com-

3. Choose the Bluetooth menu in your player and register

patibility with all USB storage devices. For this reason, in rare

the device in your player. For this, refer to the operation

cases there may be problems in playing back files from USB

manual of your player. The device “AEG MC 4462 BT”

storage devices. This is not a malfunction of the device.

will show in your player as a selection.

1. Press the FUNCTION button (18) repeatedly until “USB”

NOTE:

is shown on the display.

• Only one playback device can be connected with

2. Connect a USB storage device directly into the port.

the device at one time. If the device is already con-

Playback will automatically start after a few seconds.

nected with another playback device, the device

For operation, please refer to the section “Description of the

will not appear in the BT selection menu.

control buttons”.