AEG MC 4462 BT: English

English: AEG MC 4462 BT

English

45

The device stops automatically after all programmed titles

Any marks on the surface can be wiped off with a slightly

have been played. The programmed sequence will remain in

damp cloth without any additives.

the memory until you switch to a different operating mode.

Troubleshooting

Playing back Music in MP3 Format

Symptoms Course Solution

With this device it is possible to play back pieces of music in

CD can not be

CD is not inserted

Ensure that the disc is

MP3 format. The device also supports all standard CD types:

played back.

or inserted incor-

inserted with the label

CD, CD-RW, CD-R.

rectly.

facing upwards.

This machine of is able to play MP3 CDs. Up to 200 tracks

CD jumps dur-

Check the disc for

Check the disc for

can be compressed and stored on these CDs. Your machine

ing playback.

fingerprints, dirt or

fingerprints, dirt or

detects an MP3 CD automatically (the total number of tracks

scratches.

scratches.

and MP3s appears in the display). If you would like to play

Device cannot

Device crashes and

Disconnect the power

one of these CDs, proceed as described under “Playing

be operated.

“hangs”.

supply for 5 sec. Then

CDs/MP3”. Tracks can be programmed as described under

switch the device on

“Playing Back Programmed Tracks”.

again.

No audio

The device is not

Ensure that there is a

Please note:

signal during

registered with the

connection. Register

There are a number of different recording and compression

bluetooth con-

audio source.

the device with the

methods, as well as quality differences between CDs and self-

nection.

audio source again, if

recorded CDs.

necessary.

Furthermore, the music industry does not adhere to xed

Volume too low. Increase the volume

standards (copy protection).

on the device.

For these reasons it is possible that in rare cases there are

Increase the volume

problems with the playback of CDs and MP3 CDs. This is not

on the audio source.

a malfunction of the device.

Device can not

Registration does

Check to see if the

be connected.

not work.

audio source supports

AUX IN socket

the A2DP protocol.

Audio source is

Turn on the audio

To connect analogue replay devices. Via this socket you can

shut off.

source.

also hear the sound of other playback devices such as MP3

Bluetooth is shut

Turn on the Bluetooth

players, CD players etc. through the loudspeakers.

off on the audio

function on the audio

1. Please connect the external device with a 3.5 mm stereo

source.

source.

jack plug to the AUX-IN socket.

Bluetooth version

Use a different play-

2. Repeatedly press the FUNCTION button (18), until “AUX”

is not supported.

back device.

is shown in the display.

3. You will hear the sound playback from the external device

through the loudspeakers. You may use the VOLUME

Technical Data

control (12) to adjust the volume. The CD buttons are not

Model: ........................................................................... MC 4462 BT

functional.

Power supply: ...................................................100 - 240 V~, 50 Hz

4. For the remaining procedure please see the operating

Power consumption:.................................................................65 W

instructions of the external sound source.

Protection class: ................................................................................ II

NOTE:

Net weight: ..............................................................approx. 9.34 kg

Adjust the volume of the external device to a comfortable

Radio section:

level.

Frequency ranges: ...............................FM 87.5 ~ 108.0 MHz

Bluetooth

Bluetooth support: ........................................................V3.0 + EDR

Cleaning and Maintenance

Range: ..................................................................approx. 15 metres

Transmission frequency: ......................................2.402-2.480 GHz

WARNING:

Protocols: ....................................................................A2DP/AVRCP

Do not immerse the device in water.

The right to make technical and design modifications in

Always remove the mains plug before cleaning the

the course of continuous product development remains

machine.

reserved.