Samsung PS50C490B3W – страница 2
Инструкция к Samsung PS50C490B3W
✎
If the stereo signal is weak and an automatic switching
03 Basic Features
Timer 1
occurs, then switch to the mono.
On Time
▲
✎
Only activated in stereo sound signal.
Inactivate
▼
00 00
✎
Only available when the Input source is set to TV.
Off Time
Inactivate
00 00
Setup Menu
Volume
Source Antenna Channel
20 TV ATV 1
Repeat
Setting the Time
Sun Mon Tue Wed Thu Fri Sat
Once
Move
Adjust
Enter
Return
Time
On Time / Off Time: Set the hour, minute, and activate
■ Clock: Setting the clock is for using various timer
/ inactivate. (To activate timer with the setting you’ve
features of the TV.
chosen, set to Activate.)
The current time will appear every time you press
Volume: Set the desired volume level.
the INFO button.
Source: Select TV or USB content to be played when
the TV is turned on automatically. (USB can be selected
✎
If you disconnect the power cord, you have to set
only when a USB device is connected to the TV)
the clock again.
Antenna (when the Source is set to TV): Select ATV or
Clock Mode (Auto / Manual)
DTV.
✎
Depending on the broadcast station and signal,
Channel (when the Source is set to TV): Select the
the auto time set up may not be correct. In this
desired channel.
case, set the time manually.
Contents (when the Source is set to USB): Select a
✎
The antenna must be connected in order to set
folder in the USB device containing music or photo files
the time automatically.
to be played when the TV is turned on automatically.
Clock Set: Set the Day, Month, Year, Hour and Minute
✎
NOTE
manually.
x
If there is no music file on the USB device or the
✎
Available only when Clock Mode is set to
folder containing a music file is not selected, the
Manual.
Timer function does not operate correctly.
Time Zone (depending on the country): Select your time
x
When there is only one photo file in the USB
zone.
device, the Slide Show will not play.
✎
When Country is set to Others, you can use this
x
If a folder name is too long, the folder cannot be
function.
selected.
✎
This function is only available when the
x
Each USB you use is assigned its own folder.
Clock Mode is set to Auto.
When using more than one of the same type of
USB, make sure the folders assigned to each
Using the Sleep Timer
USB have different names.
Repeat: Select Once, Everyday, Mon~Fri, Mon~Sat,
■ Sleep Timer
: Automatically shuts down the
Sat~Sun or Manual to set at you convenience. If you
TV after a preset period of time. (Off, 30, 60, 90, 120,
select Manual, you can set up the day you want to
150 and 180 minutes).
activate the timer.
✎
To cancel Sleep Timer, select Off.
✎
The
mark indicates the day is selected.
✎
Auto Power Off (available only when the TV is turned on
Setting the On / Off Timer
by Timer): The TV will be automatically turned off after 3
hours of being left idle to prevent overheating.
■ Timer 1 / Timer 2 / Timer 3: Three different on / off
timer settings can be made. You must set the clock first.
English
21
[PC490-XH]BN68-03141D-00L10.indb 21 2010-07-09 오전 11:40:11
Basic Features
Locking Programmes
Subtitle
Use this menu to set the Subtitle mode.
Security
■ Subtitle (Off / On): Switches subtitles on
SUBT.
or off.
✎
The PIN input screen appears before the setup screen.
■ Mode (Normal / Hearing Impaired): Sets
✎
Enter your 4-digit PIN, the default of which is “0-0-0-0.”
the subtitle mode.
Change the PIN using the Change PIN option.
■ Subtitle Language: Sets the subtitle
■ Child Lock (Off / On): Lock channels in
language.
Channel Manager, to prevent unauthorized users, such
✎
If the programme you are watching does not
as children, from watching unsuitable programme.
support the Hearing Impaired function, Normal
✎
Available only when the Input source is set to TV.
automatically activates even if the
Hearing Impaired mode is selected.
■ Parental Lock (depending on the country): Prevent
unauthorized users, such as children, from watching
✎
English is the default in cases where the selected
unsuitable programme with a user-defined 4-digit PIN
language is unavailable in the broadcast.
code. If selected channel is locked, the “
” symbol will
be displayed.
Digital Text (Disable / Enable)
Allow All: Unlock All TV ratings.
(UK only)
■ Change PIN: Change your personal ID number required
to set up the TV.
If the programme broadcasts with digital text, this feature is
enabled.
✎
If you forget the PIN code, press the remote
control buttons in the following sequence, which
resets the PIN to “0-0-0-0”: POWER (off) →
General
MUTE → 8 → 2 → 4 → POWER (on).
■ Game Mode (Off / On): When connecting to a game
console such as PlayStation™ or Xbox™, you can enjoy
Other Features
a more realistic gaming experience by selecting game
mode.
✎
NOTE
Language
x
Precautions and limitations for game mode
■ Menu Language: Set the menu language.
– To disconnect the game console and connect
■ Teletext Language: Set a desired language for teletext.
another external device, set Game Mode to Off in
the setup menu.
✎
English is the default in cases where the selected
language is unavailable in the broadcast.
– If you display the TV menu in Game Mode, the
screen shakes slightly.
■ Preference (Primary Audio Language /
x
Game Mode is not available when the input source
Secondary Audio Language / Primary Subtitle
is set to TV or PC.
Language / Secondary Subtitle Language): Select
a language, which will be the default language when a
x
After connecting the game console, set Game Mode
channel is selected.
to On. Unfortunately, you may notice reduced picture
quality.
x
If Game Mode is On:
– Picture mode is set to Standard and Sound mode
is set to Movie.
– Equalizer is not available.
■ BD Wise (Off / On): Provides the optimal picture quality
for Samsung DVD, Blu-ray and Home Theatre products
which support BD Wise. When BD Wise is turned On,
the picture mode is automatically changed to the optimal
resolution.
✎
Available when connecting Samsung products
that support BD Wise through a HDMI cable.
■ Menu Transparency (Bright / Dark): Set the
Transparency of the menu.
■ Melody (Off / Low / Medium / High): Set so that a
melody plays when the TV is turned on or off.
22
English
[PC490-XH]BN68-03141D-00L10.indb 22 2010-07-09 오전 11:40:13
04 Advanced Features
Common Interface
Support Menu
■ CI Menu: This enables the user to select from the CAM-
provided menu. Select the CI Menu based on the menu
Self Diagnosis
PC Card.
■ Application Info: View information on the CAM inserted
✎
Self Diagnostic might take few seconds, this is part of
into the CI slot and on the “CI (CI+) CARD” which is
the normal operation of the TV.
inserted into the CAM. You can install the CAM anytime
■ Picture Test (Yes / No): Use to check for picture
whether the TV is on or off.
problems.
1. Purchase a CI CAM module at your nearest dealer or by
■ Sound Test (Yes / No): Use the built-in melody sound to
phone.
check for sound problems.
2. Firmly insert the “CI (CI+) CARD” into the CAM in the
✎
If you hear no sound from the TV’s speakers,
direction of the arrow.
before performing the sound test, make sure
3. Insert the CAM with the “CI (CI+) CARD” into the
Speaker Select is set to TV Speaker in the
common interface slot, in the direction of the arrow so
Sound menu.
that it aligns parallel with the slot.
✎
The melody will be heard during the test even if
4. Check if you can see a picture on a scrambled signal
Speaker Select is set to External Speaker or the
channel.
sound is muted by pressing the MUTE button.
■ Signal Information: (digital channels only) HDTV
Picture In Picture (PIP)
channel’s reception quality is either perfect or the
channels are unavailable. Adjust your antenna to
increase signal strength.
PIP
■ Troubleshooting: If the TV seems to have a problem,
refer to this description.
You can watch the TV tuner and one external video source
simultaneously. PIP (Picture-in-Picture) does not function in
✎
If none of these troubleshooting tips apply, contact
the same mode.
the Samsung customer service centre.
✎
NOTE
x
For PIP sound, refer to the Sound Select
instructions.
x
If you turn the TV off while watching in PIP mode, the
PIP window will disappear.
x
You may notice that the picture in the PIP window
becomes slightly unnatural when you use the main
screen to view a game or karaoke.
x
PIP settings
Main picture Sub picture
Component, HDMI1/DVI,
TV
HDMI2, HDMI3, PC
■ PIP (Off / On): Activate or deactivate the PIP function.
■ Channel: Select the channel for the sub-screen.
■ Size (
/
): Select a size for the sub-picture.
■ Position (
/
/
/
): Select a position for the
sub-picture.
■ Sound Select (Main / Sub): You can choose the
desired sound (Main / Sub) in PIP mode.
English
23
[PC490-XH]BN68-03141D-00L10.indb 23 2010-07-09 오전 11:40:15
Basic Features
Software Upgrade
■ By Channel: Upgrade the software using the
broadcasting signal.
Software Upgrade can be performed via a broadcasting
✎
If the function is selected during the software
signal or downloading the latest firmware from “www.
transmission period, software will be automatically
samsung.com,” to a USB memory device.
searched and downloaded.
Current Version the software already installed in the TV.
✎
The time required to download the software is
✎
Software is represented as “Year/Month/Day_Version.”
determined by the signal status.
Software Upgrade
■ Standby Mode Upgrade: A manual upgrade will be
automatically performed at selected time. Since the
Current Version 2010/01/18_000322
power of the unit is turned on internally, the screen
may be turned on slightly for the PDP product. This
phenomenon may continue for more than 1 hour until
By USB ►
the software upgrade is complete.
By Channel
Standby Mode Upgrade : 2 Hours Later
■ Alternative Software (backup): If there is an issue with
Alternative Software 2010/01/15_00321
the new firmware and it is affecting operation, you can
change the software to the previous version.
✎
If software was changed, existing software is
Move
Enter
Return
displayed.
HD Connection Guide
Installing the Latest Version
■ By USB: Insert a USB
Refer to this information when connecting external devices
TV Side Panel
drive containing the
to the TV.
firmware upgrade file,
downloaded from “www.
Contact Samsung
samsung.com,” into the
TV. Please be careful
View this information when your TV does not work properly
not to disconnect the
or when you want to upgrade the software. You can find
power or remove the
information regarding our call centres, and how to download
USB drive until upgrades
products and software.
are complete. The TV
USB Drive
will be turned off and
on automatically after
completing the firmware upgrade. When software is
upgraded, video and audio settings you have made will
return to their default settings. We advise you to write
down your settings so that you can easily reset them
after the upgrade.
24
English
[PC490-XH]BN68-03141D-00L10.indb 24 2010-07-09 오전 11:40:16
Advanced Features
04 Advanced Features
Connecting to a PC
Using an HDMI/DVI cable / a D-sub Cable
AUDIO OUT
PC OUT
DVI OUT
AUDIO OUT
Display Modes (D-Sub and HDMI/DVI Input)
Optimal resolution : 1360 X 768 @ 60Hz
Horizontal Frequency
Vertical Frequency
Pixel Clock
Mode Resolution
(KHz)
(Hz)
Frequency
Sync Polarity
(MHz)
(H / V)
IBM
640 x 350
31.469
70.086
25.175
+/-
720 x 400
31.469
70.087
28.322
-/+
MAC
640 x 480
35.000
66.667
30.240
-/-
832 x 624
49.726
74.551
57.284
-/-
VESA CVT
720 x 576
35.910
59.950
32.750
-/+
1280 x 720
56.456
74.777
95.750
-/+
640 x 480
31.469
59.940
25.175
-/-
640 x 480
37.500
75.000
31.500
-/-
640 x 480
37.861
72.809
31.500
-/-
800 x 600
37.879
60.317
40.000
+/+
800 x 600
46.875
75.000
49.500
+/+
VESA DMT
800 x 600
48.077
72.188
50.000
+/+
1024 x 768
48.363
60.004
65.000
-/-
1024 x 768
56.476
70.069
75.000
-/-
1024 x 768
60.023
75.029
78.750
+/+
1280 x 720
45.000
60.000
74.250
+/+
1360 x 768
47.712
60.015
85.500
+/+
VESA GTF
1280 x 720 52.500 70.000 89.040 -/+
✎
NOTE
x
For HDMI/DVI cable connection, you must use the HDMI IN 1(DVI) jack.
x
The interlace mode is not supported.
x
The set may operate abnormally if a non-standard video format is selected.
x
Separate and Composite modes are supported. SOG(Sync On Green) is not supported.
English
25
[PC490-XH]BN68-03141D-00L10.indb 25 2010-07-09 오전 11:40:18
Advanced Features
Media Play
Enjoy photos, music and/or movie files saved on a
MEDIA.P
USB Mass Storage Class (MSC) device.
Connecting a USB Device
1. Turn on your TV.
TV Side Panel
2. Connect a USB device containing photo, music and/or movie files to the USB
port on the back or side panel of the TV.
3. When USB is connected to the TV, popup window appears. Then you can select
Media Play.
USB Drive
✎
It might not work properly with unlicenced multimedia files.
✎
Need-to-Know List before using Media Play (USB)
x
MTP (Media Transfer Protocol) is not supported.
x
The file system supports FAT16, FAT32 and NTFS.
x
Certain types of USB Digital camera and audio devices may not be compatible with this TV.
x
Media Play only supports USB Mass Storage Class (MSC) devices. MSC is a Mass Storage Class Bulk-Only
Transport device. Examples of MSC are Thumb drives, Flash Card Readers and USB HDD (USB HUB are not
supported). Devices should be connected directly to the TV’s USB port.
x
Before connecting your device to the TV, please back up your files to prevent them from damage or loss of data.
SAMSUNG is not responsible for any data file damage or data loss.
x
Connect a USB HDD to the dedicated port, USB port.
x
Do not disconnect the USB device while it is loading.
x
The higher the resolution of the image, the longer it takes to display on the screen.
x
The maximum supported JPEG resolution is 15360X8640 pixels.
x
For unsupported or corrupted files, the “Not Supported File Format” message is displayed.
x
If the files are sorted by Basic View, up to 1000 files can be displayed in each folder.
x
MP3 files with DRM that have been downloaded from a non-free site cannot be played. Digital Rights Management
(DRM) is a technology that supports the creation of content, the distribution and management of the content in an
integrated and comprehensive way, including the protection of the rights and interests of the content providers, the
prevention of the illegal copying of contents, as well as managing billings and settlements.
x
If more than 2 PTP devices are connected, you can only use one at a time.
x
If more than two MSC devices are connected, some of them may not be recognized. A USB device that requires high
power (more than 500mA or 5V) may not be supported.
26
English
SUM
MediaPlay
Videos
Change Device
View Devices
Enter
Return
[PC490-XH]BN68-03141D-00L10.indb 26 2010-07-09 오전 11:40:19
x
If an over-power warning message is displayed while you are connecting or using a USB device, the device may not
04 Advanced Features
be recognized or may malfunction.
x
If the TV has been no input during time set in Auto Protection Time, the Screensaver will run.
x
The power-saving mode of some external hard disk drives may be released automatically when connected to the TV.
x
If a USB extension cable is used, the USB device may not be recognized or the files on the device may not be read.
x
If a USB device connected to the TV is not recognized, the list of files on the device is corrupted or a file in the list is
not played, connect the USB device to the PC, format the device and check the connection.
x
If a file deleted from the PC is still found when Media Play is run, use the “Empty the Recycle Bin” function on the PC
to permanently delete the file.
Screen Display
Move to the file you desired using the up/down/right/left buttons and then press the ENTER
or
(Play) button. The file is
played.
✎
Supports the View Devices and Home in Media Play homepage.
Information:
/Movie 01.avi 1/1
You can ascertain the selected
file name and the number of files
and page.
Movie 01.avi
Movie 02.avi
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 04.avi
Jan.10.2010
Jan.10.2010
Movie 05.avi
Movie 06.avi
Jan.10.2010
Jan.10.2010
Sort List Section:
Movie 07.avi
Movie 08.avi
Displays sorting standard.
Jan.10.2010
Jan.10.2010
✎
Sorting standard is
Movie 09.avi
Movie 10.avi
Jan.10.2010
Jan.10.2010
different depending on the
contents.
SUM
Select
Sorting
Tools
Operation Buttons
Red (Change Device): Selects a connected device.
English
27
B
Videos
Page
File List Section:
You can confirm the files
and groups that is sorted by
each category.
Change Device
Green (Preference): Sets the file preference. (not supported in Basic view)
Yellow (Select): Selects multiple files from file list. Selected files are marked with a symbol.
Blue (Sorting): Selects the sort list.
Tools: Displays the option menu.
✎
Using the
(REW) or
(FF) button, file list can move to next or previous page.
[PC490-XH]BN68-03141D-00L10.indb 27 2010-07-09 오전 11:40:21
Advanced Features
Videos
Playing Video
1. Press the ◄ or ► button to select Videos, then press the ENTER
button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file list.
3. Press the ENTER
button or
(Play) button.
– The selected file is displayed on the top with its playing time.
– If video time information is unknown, play time and progress bar are not displayed.
– During playing the video, you can search using the ◄ and ► button.
✎
In this mode, you can enjoy movie clips contained on a Game,
but you cannot play the Game itself.
y Supported Subtitle Formats
Name File extension Format
MPEG-4 time-based text .ttxt XML
SAMI .smi HTML
SubRip .srt string-based
SubViewer .sub string-based
Micro DVD .sub or .txt string-based
y Supported Video Formats
File Extension Container Video Codec Resolution
Frame rate
Bit rate
(fps)
(Mbps)
Audio Codec
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
*.avi
AVI
XviD 1920x1080 6 ~ 30 8
MP3 / AC3 / LPCM /
*.mkv
MKV
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
ADPCM / DTS Core
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
Divx 3.11 / 4.x / 5.1 / 6.0 1920x1080 6 ~ 30 8
XviD 1920x1080 6 ~ 30 8
*.asf ASF
MP3 / AC3 / LPCM /
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
ADPCM / WMA
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
*.wmv ASF Window Media Video v9 1920x1080 6 ~ 30 25 WMA
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
*.mp4 MP4
MP3 / ADPCM / AACMPEG4 SP / ASP 1920x1080 6 ~ 30 8
XVID 1920x1080 6 ~ 30 8
H.264 BP / MP / HP 1920x1080 6 ~ 30 25
*.3gp 3GPP
ADPCM / AAC / HE-AAC
MPEG4 SP / ASP 1920x1080 6 ~ 30 8
*.vro
VRO
MPEG1 1920x1080 24 / 25 / 30 30
VOB
AC3 / MPEG / LPCM
MPEG2 1920x1080 24 / 25 / 30 30
MPEG1 1920x1080 24 / 25 / 30 30
*.mpg
*.mpeg
PS
AC3 / MPEG / LPCM / AACMPEG2 1920x1080 24 / 25 / 30 30
H.264 1920x1080 6 ~ 30 25
*.ts
MPEG2 1920x1080 24 / 25 / 30 30
*.tp
TS
H.264 1920x1080 6 ~ 30 25
AC3 / AAC / MP3 / DD+ /
*.trp
HE-AAC
VC1 1920x1080 6 ~ 30 25
28
English
00:04:03 / 00:07:38 1/1
Movie 01.avi
SUM
Pause
Jump
Tools
Return
[PC490-XH]BN68-03141D-00L10.indb 28 2010-07-09 오전 11:40:23
Other Restrictions
04 Advanced Features
✎
NOTE
x
If there are problems with the contents of a codec, the codec will not be supported.
x
If the information for a Container is incorrect and the file is in error, the Container will not be able to play
correctly.
x
Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec
listed in the table above.
x
If the Index Table is in error, the Seek (Jump) function is not supported.
Video Decoder Audio Decoder
• Supports up to H.264, Level 4.1
• Supports up to WMA 7, 8, 9, STD
• H.264 FMO / ASO / RS, VC1 SP / MP / AP L4 and AVCHD are not
• WMA 9 PRO does not support 2 channel excess multi channel or
supported.
lossless audio.
• GMC is not supported.
• WMA sampling rate 22050Hz mono is not supported.
• H.263 is not supported.
Playing movie file continuously (Resume Play)
If you exit the playing videos function, it can be played later from the point where it was stopped.
1. Select the movie file you want to play continuously by pressing
the ◄ or ► button to select it from the file list section.
2. Press the
(Play) / ENTER
button.
3. Select Play Continuously (Resume Play) by pressing the Blue
button. The Movie will begin to play from where it was stopped.
✎
The Blue button is available when resuming play.
✎
If the Cont. movie play help function is set to On in the
Settings menu, a pop-up message will appear when you
resume play a movie file.
Music
Playing Music
1. Press the ◄ or ► button to select Music, then press the
ENTER
button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTER
button or
(Play) button.
– During playing the music, you can search using the ◄ and ►
button.
–
(REW) and
(FF) buttons do not function during play.
✎
Only displays the files with MP3 and PCM file extension. Other
file extensions are not displayed, even if they are saved on the
same USB device.
✎
If the sound is strange when playing MP3 files, adjust the
Equalizer in the Sound menu. (An over-modulated MP3 file
may cause a sound problem.)
English
29
3/15
I Love You
I Love you
Jhon
Jhon
1st Album
Music 1
Pop
No Singer
2010
Music 2
4.2MB
No Singer
Music 3
No Singer
01:10 / 04:02
Music 4
No Singer
Music 5
No Singer
SUM
Playlist
Pause
Jump
Tools
Return
00:04:03 / 00:07:38 1/1
Movie 01.avi
SUM
Play continuously
Resumes playing from the last viewed
scene.
Play continuously
Pause
Jump
Tools
Return
[PC490-XH]BN68-03141D-00L10.indb 29 2010-07-09 오전 11:40:26
Advanced Features
Photos
Viewing a Photo (or Slide Show)
1. Press the ◄ or ► button to select Photos, then press the
ENTER
button in the Media Play menu.
2. Press the ◄/►/▲/▼ button to select the desired file in the file
list.
3. Press the ENTER
button or
(Play) button.
– While a photo list is displayed, press the
(Play) /
ENTER
button on the remote control to start slide show.
– All files in the file list section will be displayed in the slide show.
– During the slide show, files are displayed in order from
currently being shown.
✎
Music files can be automatically played during the Slide Show if
the Background Music is set to On.
✎
The BGM Mode cannot be changed until the BGM has finished
loading.
Playing the Multiple Files
Playing the selected video/music/photo files
1. Press the Yellow button in the file list to select the desired file.
2. Repeat the above operation to select multiple files.
✎
NOTE
x
The
mark appears to the left of the selected files.
x
To cancel a selection, press the Yellow button again.
x
To deselect all selected files, press the TOOLS button
and select Deselect All.
3. Press the TOOLS button and select Play Selected Contents.
Playing the video/music/photo file group
1. While a file list is displayed, move to the any file in desired group.
2. Press the TOOLS button and select Play Current Group.
Media Play Additional Function
Sorting the file list
Press the Blue button in the file list to sort the files.
Category Operations Videos Music Photos
Basic View
It shows whole folder. You can view the photo by selecting the folder.
Title
It sorts and displays the file title in Symbol/Number/Alphabet/Special order.
Preference
It sorts and displays the file by preference. You can change the file preference in the file list section
using the Green button.
Latest Date
It sorts and shows files by latest date.
Earliest Date
It sorts and shows files by earliest date.
Artist
It sorts the music file by artist in alphabetical.
Album
It sorts the music file by album in alphabetical order.
Genre
It sorts music files by the genre.
Mood
It sorts music files by the mood. You can change the music mood information.
Monthly
It sorts and shows photo files by month. It sorts only by month (from January to December)
regardless of year.
30
English
Image1024.jpg 1024x768 2010/2/1 3/15
SUM
Normal
Pause
Previous/Next
Tools
Return
/Movie 01.avi
1/1
Movie 01.avi
Movie 02.avi
Jan.10.2010
Jan.10.2010
Movie 03.avi
Movie 04.avi
Jan.10.2010
Jan.10.2010
Movie 05.avi
Movie 06.avi
Jan.10.2010
Jan.10.2010
Movie 07.avi
Movie 08.avi
Jan.10.2010
Jan.10.2010
Movie 09.avi
Movie 10.avi
Jan.10.2010
Jan.10.2010
SUM
Videos
2 les selected Page
Change Device
Select Sorting
Tools
[PC490-XH]BN68-03141D-00L10.indb 30 2010-07-09 오전 11:40:29
Videos/Music/Photos Play Option menu
04 Advanced Features
During playing a file, press the TOOLS button.
Category Operations Videos Music Photos
Title You can move the other file directly.
Repeat Mode You can play movie and music files repeatedly.
Picture Size You can adjust the picture size for preference.
Picture Setting You can adjust the picture setting. (p. 14 ~ 19)
Sound Setting You can adjust the sound setting. (p. 19, 20)
Subtitle Setting You can play the video file with subtitle. This function only works if the subtitles are the same
file name as the video file.
Stop Slide Show /
You can start or stop a slide show.
Start Slide Show
Slide Show Speed You can select the slide show speed during the slide show.
Background Music You can set and select background music when watching a slide show.
Zoom You can zoom into images in full screen mode.
Rotate You can rotate images in full screen mode.
Information You can see detailed information about the played file.
Settings
Using the Setup Menu
■ Cont. movie play help (Resume Play) (On / Off): Select to display the help pop-up message for continuous movie
playback.
■ Get the DivX® VOD registration code: Shows the registration code authorized for the TV. If you connect to the DivX web
site and register the registration code with a personal account, you can download VOD registration file. If you play the VOD
registration using Media Play, the registration is completed.
✎
For more information on DivX® VOD, visit “www.DivX.com.”
■ Get the DivX® VOD deactivation code: When DivX® VOD is not registered, the registration deactivation code is
displayed. If you execute this function when DivX® VOD is registered, the current DivX® VOD registration is deactivated.
■ Information: Select to view information about the connected device.
English
31
[PC490-XH]BN68-03141D-00L10.indb 31 2010-07-09 오전 11:40:30
Advanced Features
Anynet+
What is Anynet+?
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung
TV’s remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your
Samsung device has this feature, check if there is an Anynet+ logo on it.
To connect to Home Theatre
TV
Anynet+ Device
Anynet+
1,2
Home Theatre
Device 3
HDMI Cable
HDMI Cable
HDMI Cable
Optical Cable
1. Connect the HDMI IN (1(DVI), 2 or 3) jack on the TV and the HDMI OUT jack of the corresponding Anynet+ device using
an HDMI cable.
2. Connect the HDMI IN jack of the home theatre and the HDMI OUT jack of the corresponding Anynet+ device using an
HDMI cable.
✎
NOTE
x
Connect the Optical cable between the DIGITAL AUDIO OUT (OPTICAL) jack on your TV and the Digital Audio Input
on the Home Theatre.
x
When following the connection above, the Optical jack only outputs 2 channel audio. You will only hear sound
from the Home Theatre’s Front, Left and Right speakers and the subwoofer. If you want to hear 5.1 channel audio,
connect the DIGITAL AUDIO OUT (OPTICAL) jack on the DVD / satellite box (i.e. Anynet Device 1 or 2) directly to the
Amplifier or Home Theatre, not the TV.
x
Connect only one Home Theatre.
x
You can connect an Anynet+ device using the HDMI cable. Some HDMI cables may not support Anynet+ functions.
x
Anynet+ works when the AV device supporting Anynet+ is in the standby or on status.
x
Anynet+ supports up to 12 AV devices in total. Note that you can connect up to 3 devices of the same type.
32
English
[PC490-XH]BN68-03141D-00L10.indb 32 2010-07-09 오전 11:40:31
Anynet+ Menu
04 Advanced Features
The Anynet+ menu changes depending on the type and status of the Anynet+ devices connected to the TV.
Anynet+ Menu Description
View TV Changes Anynet+ mode to TV broadcast mode.
Device List Shows the Anynet+ device list.
(device_name) MENU Shows the connected device menus. E.g. If a DVD recorder is connected, the disc menu of
the DVD recorder will appear.
(device_name) INFO Shows the play menu of the connected device. E.g. If a DVD recorder is connected, the
play menu of the DVD recorder will appear.
Recording: (*recorder) Starts recording immediately using the recorder. (This is only available for devices that
support the recording function.)
Stop Recording: (*recorder) Stops recording.
Receiver Sound is played through the receiver.
If more than one recording device is connected, they are displayed as (*recorder) and if only one recording device is
connected, it will be represented as (*device_name).
Setting Up Anynet+
■ Setup
Anynet+ (HDMI-CEC) (Off / On): To use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On.
✎
When the Anynet+ (HDMI-CEC) function is disabled, all the Anynet+ related operations are deactivated.
Auto Turn Off (No / Yes): Setting an Anynet+ Device to turn off automatically when the TV is turned off.
✎
If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the TV powers off.
However, a device may not turn off if recording is in progress.
✎
May not be enabled depending on the device.
Switching between Anynet+ Devices
1. Anynet+ devices connected to the TV are listed.
✎
If you cannot find a device you want, press the Red button to refresh the list.
2. Select a device and press the ENTER
button. You can switch to the selected device.
✎
Only when you set Anynet+ (HDMI-CEC) to On in the Application menu, the Device List menu appears.
x
Switching to the selected device may take up to 2 minutes. You cannot cancel the operation during the switching
operation.
x
If you have selected external input mode by pressing the SOURCE button, you cannot use the Anynet+ function.
Make sure to switch to an Anynet+ device by using the Device List.
Recording
You can make a recording of a TV programme using a Samsung recorder.
1. Select Recording.
✎
When there are more than two recording devices.
x
When multiple recording devices are connected, the recording devices are listed. Select one recording device in
the Device List.
✎
When the recording device is not displayed, select Device List and press the Red button to search devices.
2. Press the EXIT button to exit.
✎
You can record the source streams by selecting Recording: (device_name).
✎
Pressing the
(REC) button will record whatever you are currently watching. If you are watching video from
another device, the video from the device is recorded.
✎
Before recording, check whether the antenna jack is properly connected to the recording device. To properly
connect an antenna to a recording device, refer to the recording device’s users manual.
English
33
[PC490-XH]BN68-03141D-00L10.indb 33 2010-07-09 오전 11:40:33
Advanced Features
Listening through a Receiver
You can listen to sound through a receiver (i.e Home Theatre) instead of the TV Speaker.
1. Select Receiver and set to On.
2. Press the EXIT button to exit.
✎
If your receiver supports audio only, it may not appear in the device list.
✎
The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO
OUT (OPTICAL) jack of the TV.
✎
When the receiver (i.e Home Theatre) is set to On, you can hear sound output from the TV’s Optical jack. When the
source is a digital component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be
heard from the receiver.
✎
NOTE
x
You can only control Anynet+ devices using the TV remote control, not the buttons on the TV.
x
The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet+ device.
x
The Anynet+ functions do not operate with other manufacturers’ products.
Troubleshooting for Anynet+
Problem Possible Solution
Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only.
• Connect only one receiver (home theatre).
• Check if the Anynet+ device power cord is properly connected.
• Check the Anynet+ device’s Video/Audio/HDMI cable connections.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
• Check whether the TV remote control is in TV mode.
• Check whether it is Anynet+ exclusive remote control.
• Anynet+ doesn’t work in certain situations. (Searching channels, operating Media Play (USB) or Plug & Play
(Initial setup), etc.)
• When connecting or removing the HDMI cable, please make sure to search devices again or turn your TV off
and on again.
• Check if the Anynet+ Function of Anynet+ device is set on.
I want to start Anynet+. • Check if the Anynet+ device is properly connected to the TV and check if the Anynet+ (HDMI-CEC) is set to
On in the Anynet+ Setup menu.
• Press the TOOLS button to display the Anynet+ menu and select a menu you want.
I want to exit Anynet+. • Select View TV in the Anynet+ menu.
• Press the SOURCE button on the TV remote control and select a device other than Anynet+ devices.
• Press P
/
and PRE-CH to change the TV mode. (Note that the channel button operates only when a
tuner-embedded Anynet+ device is not connected.)
The message “Connecting to
• You cannot use the remote control when you are configuring Anynet+ or switching to a view mode.
Anynet+ device...” appears on the
• Use the remote control when the Anynet+ setting or switching to view mode is complete.
screen.
The Anynet+ device does not play. • You cannot use the play function when Plug & Play (Initial setup) is in progress.
The connected device is not
• Check whether or not the device supports Anynet+ functions.
displayed.
• Check whether or not the HDMI cable is properly connected.
• Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ setup menu.
• Search Anynet+ devices again.
• You can connect an Anynet+ device using the HDMI cable only. Some HDMI cables may not support Anynet+
functions.
• If it is terminated by an abnormal situation such as disconnecting the HDMI cable or power cord or a power
failure, please repeat the device scan.
The TV programme cannot be
• Check whether the antenna jack on the recording device is properly connected.
recorded.
The TV sound is not output
• Connect the optical cable between TV and the receiver.
through the receiver.
34
English
[PC490-XH]BN68-03141D-00L10.indb 34 2010-07-09 오전 11:40:34
Other Information
05 Other Information
Analogue Channel Teletext Feature
The index page of the Teletext service gives you information on how to use the service. For Teletext information to be displayed
correctly, channel reception must be stable. Otherwise, information may be missing or some pages may not be displayed.
✎
You can change Teletext pages by pressing the numeric buttons on the remote control.
1
(Teletext on/mix/off):
(sub-page): Display the
8
Activate the Teletext mode after
available sub-page.
selecting the channel providing the
SOURCE
(page up): Display the next
Teletext service. Press the button
7
9
Teletext page.
twice to overlap the Teletext mode
(page down): Display the
0
with the current broadcasting
previous Teletext page.
screen. Press it one more time to
exit teletext.
(reveal): Display the hidden
!
text (answers to quiz games, for
2
(store): Store the Teletext
example). To display the normal
pages.
screen, press it again.
3
(index): Display the index
(contents) page at any time while
TTX/MIX
1
8
(cancel): Display the current
@
broadcast when searching for a
you are viewing Teletext.
page.
4
(size): Display the double-size
9
letters on the upper half of the
CH LIST
screen. For the lower half of the
Typical Teletext page
2
screen, press it again. To display
0
the normal screen, press it once
3
again.
5
(hold): Hold the display on
4
INFO
!
a given page if the selected
page is linked with several
secondary pages which follow on
automatically. To resume, press
it again.
RETURN
Part Contents
6
Colour buttons (red/green/ yellow/
ΕΧΙΤ
A Selected page
blue): If the FASTEXT system is
5
@
number.
used by a broadcasting company,
6
A B C D
B Broadcasting channel
the different topics covered
identity.
on a Teletext page are colour-
C Current page number
coded and can be selected by
or search indications.
pressing the coloured buttons.
Press one of them corresponding
D Date and time.
to the required. The page is
E Text.
displayed with other coloured
F Status information.
information that can be selected
FASTEXT information.
in the same way. To display the
previous or next page, press the
corresponding coloured button.
7
(mode): Select the Teletext
mode (LIST/ FLOF).
If you press this button in the
LIST mode, the mode is switched
into the List save mode. In the
List save mode, you can save a
Teletext page into list using the
(store) button.
English
35
[PC490-XH]BN68-03141D-00L10.indb 35 2010-07-09 오전 11:40:36
Other Information
Installing the Wall Mount
Assembling the Blanking Bracket
When installing the TV onto a wall, attach the Blanking Bracket as shown.
Blanking Bracket
Installing the Wall Mount Kit
The wall mount kit (sold separately) allows you to mount the TV on the wall.
For detailed information on installing the wall mount, see the instructions provided with the wall mount. Contact a technician for
assistance when installing the wall mount bracket.
Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the
TV on your own.
Wall Mount Kit Specifications (VESA)
✎
The wall mount kit is not supplied, but sold separately.
Install your wall mount on a solid wall perpendicular to the floor. When attaching to other building materials, please contact
your nearest dealer. If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
✎
NOTE
x
Standard dimensions for wall mount kits are shown in the table below.
x
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for assembly are provided.
x
Do not use screws that do not comply with the VESA standard screw specifications.
x
Do not use screws that are longer than the standard dimension or do not comply with the VESA standard screw
specifications. Screws that are too long may cause damage to the inside of the TV set.
x
For wall mounts that do not comply with the VESA standard screw specifications, the length of the screws may differ
depending on the wall mount specifications.
x
Do not fasten the screws too strongly; this may damage the product or cause the product to fall, leading to personal
injury. Samsung is not liable for these kinds of accidents.
x
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or
the consumer fails to follow the product installation instructions.
x
Do not mount the TV at more than a 15 degree tilt.
Product Family inches VESA Spec. (A * B) Standard Screw Quantity
42~50 400 X 400
58~63 600 X 400
PDP TV
M8 4
70~79 800 X 400
80~ 1400 X 800
✎
Unscrew the hole around before installing Wall-Mount on the wall.
Do not install your Wall Mount Kit while your TV is turned on. It may result in personal injury due to
electric shock.
36
English
[PC490-XH]BN68-03141D-00L10.indb 36 2010-07-09 오전 11:40:37
05 Other Information
Securing the TV to the wall
Caution: Pulling, pushing, or climbing onto the TV may cause the TV to fall. In particular, ensure that your
children do not hang over or destabilize the TV; doing so may cause the TV to tip over, resulting in serious
injuries or death. Follow all safety precautions provided in the included Safety Flyer. For added stability and
safety, install the anti-fall device as follows.
To Avoid the TV from Falling
1. Put the screws into the clamps and firmly fasten them onto the wall.
Confirm that the screws have been firmly installed onto the wall.
✎
You may need additional material such as an anchor depending on
the type of wall.
✎
Since the necessary clamps, screws, and string are not supplied,
please purchase these additionally.
2. Remove the screws from the back centre of the TV, put the screws into
the clamps, and then fasten the screws onto the TV again.
✎
Screws may not be supplied with the product. In this case, please
purchase the screws of the following specifications.
3. Connect the clamps fixed onto the TV and the clamps fixed onto the wall
with a strong cable and then tie the string tightly.
✎
NOTE
x
Install the TV near to the wall so that it does not fall backwards.
x
It is safe to connect the string so that the clamps fixed on the
wall are equal to or lower than the clamps fixed on the TV.
Wall
x
Untie the string before moving the TV.
4. Verify all connections are properly secured. Periodically check
connections for any sign of fatigue for failure. If you have any doubt about
the security of your connections, contact a professional installer.
English
37
[PC490-XH]BN68-03141D-00L10.indb 37 2010-07-09 오전 11:40:38
Other Information
Troubleshooting
If you have any questions about the TV, first refer to this list. If none of these troubleshooting tips apply, please visit “www.
samsung.com,” then click on Support, or contact the call centre listed on the back-cover of this manual.
Issues Solutions and Explanations
Picture Quality First of all, please perform the Picture Test and confirm that your TV is properly displaying test image.
(go to MENU - Support - Self Diagnosis - Picture Test) (p. 23)
If the test image is properly displayed, the poor picture may caused by the source or signal.
The TV image does not look as good as it
• If you have an analogue cable/set top box, upgrade to a digital set top box. Use HDMI or Component
did in the store.
cables to deliver HD (high definition) picture quality.
• Cable/Satellite subscribers: Try HD stations from the channel line up.
• Antenna connection: Try HD stations after performing Auto programme.
✎
Many HD channels are up scaled from SD(Standard Definition) contents.
• Adjust the Cable/Set top box video output resolution to 1080i or 720p.
• Make sure you are watching the TV at the minimum recommended distance based on the size and
definition of the signal.
The picture is distorted: macro block error,
• Compression of video contents may cause picture distortion especially in fast moving pictures such
small block, dots, pixelization
as sports and action movies.
• Low signal level or bad quality can cause picture distortion. This is not a TV issue.
• Mobile phones used close to the TV (cca up to 1m) may cause noise in picture on analogue and
digital TV.
Colour is wrong or missing. • If you’re using a component connection, make sure the component cables are connected to the
correct jacks. Incorrect or loose connections may cause colour problems or a blank screen.
There is poor colour or brightness. • Adjust the Picture options in the TV menu. (go to Picture mode / Colour / Brightness / Sharpness)
(p. 14)
• Adjust Energy Saving option in the TV menu. (go to MENU - Picture - Eco Solution -
Energy Saving) (p. 14)
• Try resetting the picture to view the default picture settings. (go to MENU - Picture - Picture Reset)
(p. 19)
There is a dotted line on the edge of the
• If the picture size is set to Screen Fit, change it to 16:9 (p. 15).
screen.
• Change cable/set top box resolution.
Picture is black and white. • If you are using an AV composite input, connect the video cable (yellow) to the Green jack of
component input 1 on the TV.
When changing channels, the picture
• If connected with a cable box, please try to reset the cable box. Reconnect the AC cord and wait until
freezes or is distorted or delayed.
the cable box reboots. It may take up to 20 minutes.
• Set the output resolution of the cable box to 1080i or 720p.
Sound Quality First of all, please perform the Sound Test to confirm that your TV audio is properly operating.
(go to MENU - Support - Self Diagnosis - Sound Test) (p. 23)
If the audio is OK, the sound problem may caused by the source or signal.
There is no sound or the sound is too low
• Please check the volume the of external device connected to your TV.
at maximum volume.
The picture is good but there is no sound. • Set the Speaker Select option to TV Speaker in the sound menu (p. 20).
• If you are using an external device, make sure the audio cables are connected to the correct audio
input jacks on the TV.
• If you are using an external device, check the device’s audio output option (ex. you may need to
change your cable box’s audio option to HDMI when you have a HDMI connected to your TV).
• If you are using a DVI to HDMI cable, a separate audio cable is required.
• If your TV has a headphone jack, make sure there is nothing plugged into it.
The speakers are making an inappropriate
• Check the cable connections. Make sure a video cable is not connected to an audio input.
noise.
• For antenna or Cable connections, check the signal strength. Low signal level may cause sound
distortion.
38
English
[PC490-XH]BN68-03141D-00L10.indb 38 2010-07-09 오전 11:40:39
05 Other Information
Issues Solutions and Explanations
No Picture, No Video
The TV won’t turn on. • Make sure the AC power cord is securely plugged in to the wall outlet and the TV.
• Make sure the wall outlet is working.
• Try pressing the POWER button on the TV to make sure the problem is not the remote. If the TV turns
on, refer to “Remote control does not work” below.
The TV turns off automatically. • Ensure the Sleep Timer is set to Off in the Setup menu (p. 21).
• If your PC is connected to the TV, check your PC power settings.
• Make sure the AC power cord is plugged in securely to the wall outlet and the TV.
• When watching TV from an antenna or cable connection, the TV will turn off after 10 - 15 minutes if
there is no signal.
There is no picture/Video. • Check cable connections (remove and reconnect all cables connected to the of TV and external
devices).
• Set your external devices’ (Cable/Set top Box, DVD, Blu-ray etc) video outputs to match the
connections to the TV input. For example, if an external device’s output is HDMI, it should be
connected to an HDMI input on the TV.
• Make sure your connected devices are powered on.
• Be sure to select the TV’s correct source by pressing the SOURCE button on the TV remote.
RF(Cable/Antenna) Connection
The TV is not receiving all channels. • Make sure the Antenna cable is connected securely.
• Please try Plug & Play (Initial setup) to add available channels to the channel list. Go to MENU -
Setup - Plug & Play (Initial setup) and wait for all available channels to be stored (p. 7).
• Verify the Antenna is positioned correctly.
The picture is distorted: macro block error
• Compression of video contents may cause picture distortion, especially with fast moving pictures
small block, dots, pixelization
such as sports and action movies.
• A low signal can cause picture distortion. This is not a TV issue.
PC Connection
A “Mode Not Supported” message
• Set your PC’s output resolution and frequency so they match the resolutions supported by the TV
appears.
(p. 25).
“PC” is always shown on the source list,
• This is normal; “PC” is always shown on the source list, regardless of whether a PC is connected.
even if a PC is not connected.
The video is OK but there is no audio. • If you are using a HDMI connection, check the audio output setting on your PC.
Others
The picture won’t display in full screen. • HD channels will have black bars on either side of the screen when displaying upscaled SD (4:3)
contents.
• Black bars on the top and bottom will appear during movies that have aspect ratios different from
your TV.
• Adjust the picture size options on your external device or TV to full screen.
The remote control does not work. • Replace the remote control batteries with the poles (+/–) in the right direction.
• Clean the sensor’s transmission window on the remote.
• Try pointing the remote directly at the TV from 5~6 feet away.
Plasma TV is making humming noise. • Plasma TVs typically make a soft humming sound. This is normal. It’s caused by the electrical charges
that are used to create the images on the screen.
• If the humming sound is loud, you may have set the brightness on the TV too high. Try setting the
brightness lower.
• You can also have loud humming if the back of your Plasma TV is too close to a wall or other hard
surface. Also try rerouting your connection cables.
• Improper installation of wall mount can create excessive noise.
Image Retention (Burn In) Issue. • To minimize the possibility of screen burn, this unit is equipped with screen burn reduction technology.
Pixel Shift technology enables you to set picture movement up/ down (Vertical Line) and side to side
(Horizontal Dot).
English
39
[PC490-XH]BN68-03141D-00L10.indb 39 2010-07-09 오전 11:40:40
Other Information
Issues Solutions and Explanations
The cable/set top box remote control
• Programme the Cable/Set top box remote control to operate the TV. Refer to the Cable/Set user
doesn’t turn the TV on or off, or adjust the
manual for the SAMSUNG TV code.
volume.
A “Mode Not Supported” message
• Check the supported resolution of the TV, and adjust the external device’s output resolution
appears.
accordingly. Refer to the resolution settings on page 25 of this manual.
There is a plastic smell from the TV. • This smell is normal and will dissipate over time.
The TV Signal Information is unavailable
• This function is only available with digital channels from an Antenna / RF/Coax connection (p. 23).
in the Self Diagnostic Test menu.
The TV is tilted to the side. • Remove the base stand from the TV and reassemble it.
There are difficulties assembling the stand
• Make sure the TV is placed on a flat surface. It is necessary to use magnetized screw driver if you
base.
cannot remove the screws from the TV.
The channel menu is greyed out.
• The Channel menu is only available when the TV source is selected.
(unavailable)
Your settings are lost after 30 minutes or
• If the TV is in the Store Demo mode, it will reset audio and picture settings every 30 minutes. Change
every time the TV is turned off.
the settings from Store Demo mode to Home Use mode in the Plug & Play (Initial setup) procedure.
Press the SOURCE button to select TV mode, and go to MENU → Setup → Plug & Play (Initial
setup) → ENTER
. (p. 7)
You have intermittent loss of audio or
• Check the cable connections and reconnect them.
video.
• Loss of audio or video can be caused by using overly rigid or thick cables. Make sure the cables are
flexible enough for long term use. If mounting the TV to the wall, we recommend using cables with 90
degree connectors.
You see small particles when you look
• This is part of the product’s design and is not a defect.
closely at the edge of the frame of the TV.
The PIP menu is not available. • PIP functionality is only available when you are using a HDMI, PC or components source (p. 23).
The message “Scramble signal” or “Weak
• If you are using a CAM CARD (CI/CI+), check that it is installed into the common interface slot.
Signal/No Signal” appears.
• If there is still a problem, pull the CAM CARD out of the TV and insert it into the slot again.
You turned the TV off 45 minutes ago, and
• It is normal. The TV operates the OTA (Over The Aerial) function itself to upgrade firmware
it turned on again.
downloaded whilst your watching TV.
There are recurrent picture/sound issues. • Check and change the signal/source.
A reaction may occur between the rubber
• To prevent this, use felt pads on any surface of the TV that comes in direct contact with furniture.
cushion pads on the base stand and the
top finish of some furniture.
✎
Some of above pictures and functions are available at specific models only.
40
English
[PC490-XH]BN68-03141D-00L10.indb 40 2010-07-09 오전 11:40:41
