AEG 400625: English

48

English

Storing stations:

Playing back music via Bluetooth

1. Search for the required radio station with the /

TUN+ or the /TUN- button.

Bluetooth involves a technology for wireless radio connec-

2. In order to store the radio station, press the

tion of devices over a short distance. Devices with Bluetooth

MEM/P-MODE button (17). The notification

standard are transmitting between 2.402 and 2.480 GHz in

“P 01” will blink in the display and “MEM” is

the ISM band (Industrial, Scientific and Medical). Interference

shown.

can be caused for example by WLAN-networks, DAB radios,

3. Use the / M+ /

/ / M- / ID3 buttons (8/12)

cordless phones, or microwave ovens which work on the

to select the desired memory location.

same frequency band.

4. Press the MEM/P-MODE button. The radio sta-

This device offers you the possibility to use a Bluetooth-

tion will be stored.

enabled device. The functional radius is limited to approx.

NOTE:

15 metres depending on the surroundings and the unit used.

“STEREO” will appear in the display once the station is

If your playing device supports the A2DP profile (Advanced

received with stereo sound.

Audio Distribution Profile) and has a music-player function,

If there is interference on the received station, we recom-

then you can also wirelessly transfer music to the device. The

mend that you switch to MONO. Press the FM ST/MO

A2DP profile involves a multi-vendor Bluetooth profile. By

button (3 on the remote control) to switch between MONO

streaming, stereo-audio signals are wirelessly transferred be-

and STEREO.

tween the playing device (source) and the receiving device.

To be able to remotely control the source, the playback de-

Selecting stored radio stations

vice must support the AVRCP profile (Audio Video Remote

Control Profile).

Press the

/ M+ / button (8) or the /M-/ID3 button (12)

repeatedly to scroll through the preset radio stations.

Due to the different device manufacturers, models, and

software versions, a full functionality cannot be guaranteed.

Playing CDs/MP3

Logging on devices (Pairing)

1. Select the CD mode with the /FUNC button (20). The

Before you listen to music via the unit, you must pair the

following will appear in the display “CD”.

devices.

2. Open the CD tray (4) by pressing the PUSH TO OPEN

1. Ensure, that the Bluetooth function is activated in your

button (5).

player (e.g. mobile phone). For this, refer to the operation

3. Insert an audio CD with the printed side facing upwards

manual of your player.

on to the central cone so that the CD clicks into place

2. Select the BLUETOOTH mode using the

/FUNC but-

and then close the lid of the CD compartment.

ton (20). The control light PAIR/STANDBY will blink blue.

4. The CD will play from the first title. The elapsed playing

This signalizes that the device is in pairing mode.

time and the current track will be shown in the display.

3. Choose the Bluetooth menu in your player and register

If available, the ID3 tag Meta data will additionally alter-

the device in your player. For this, refer to the operation

nately be shown as a continuous band with CDs in the

manual of your player. The device “AEG SR 4364 BT” will

MP3 format.

show in your player as a selection.

5. In order to remove a CD, please press the /M-/ID3 but-

ton (12), open the CD compartment and lift the CD out

NOTE:

carefully.

• Only one playback device can be connected with

Always keep the CD deck closed.

the device at one time. If the device is already con-

nected with another playback device, the device

NOTE:

will not appear in the BT selection menu.

• If a disc is inserted the wrong way around, respectively

• To disconnect an existing Bluetooth connection,

if no disc is inserted, then the message “READING” will

keep the

/ M+ / button (8) pressed down. The

blink and “NO DISC” appears on the display.

PAIR/STANDBY control lamp flashes blue.

• Playback of CDs produced by the user cannot be

guaranteed due to the large variety of software and CD

4. Now enter the password “0000” in your player, depend-

media available.

ing on the device manufacturers, model, and software

• When the CD remains inserted: The unit remembers

version.

the current play position even if you switch off the unit

If pairing was done successfully, the PAIR/STANDBY control

or switch to another mode. To play the CD again from

lamp lights up blue. For the further procedure, please refer

the start, press the /M-/ID3 button and then the /

to the user manual of the playback unit. If possible, adjust the

M+ / button.

volume of the external unit to a comfortable level.