AEG md 5503: English

English

21

• After use, always remove the nozzles from the handle

 NOTE:

and clean them thor-oughly under warm running

There may still be some dust or production residues on

water, before drying them o and returning them to

the device. We recommend that you clean the device

the storage container.

as described under „Cleaning“.

• Drive the handle before inserting it into the water

jet.

• When water additives are used, rinse out the water

Before Initial Use

container with clear water. Then  ll the water con-

• Fill the water container with water.

tainer with 100 ml of clear water and pass the water

• Turn the on/o switch (6) on.

through the device into the wash basin.

• Turn the regulator to the maximum setting. Then

switch on the device on the handle.

Technical Data

• With the adjustment ring (1) you can set the type of

water jet. You have the choice between a soft jet and

Model: ..................................................................................MD 5503

a massage jet.

Power supply: ....................................................220-240 V, 50 Hz

• Allow the water to  ow directly into a wash basin in

order to remove any residues.

Power consumption:...............................................................15 W

• Rinse the nozzle attachments brie y under running

Protection class: ..............................................................................ΙΙ

water.

Net weight: ............................................................................0,98 kg

Nozzles

This device has been tested according to all relevant cur-

rent CE guidelines, such as electromagnetic compatibility

The scope of delivery contains 4 nozzles with di erent

and low voltage directives, and has been constructed in

coloured rings. These can be allocated to di erent users.

accordance with the latest safety regulations.

Subject to technical changes without prior notice!

Operation

• Before using the water jet you should clean your

teeth with a toothbrush.

• Attach a nozzle on the handle in such a way that the

aperture of the nozzle is pointing at the water stop

button. Ensure that the nozzle is  xed  rmly in posi-

Meaning of the “Dustbin” Symbol

tion.

• Fill the water container with water which is hand

Protect our environment: do not dispose of electrical

warm. Please do not  ll in any hot water.

equipment in the domestic waste.

• In order to clean the nozzles, allow water to  ow

Please return any electrical equipment that you will no

through the nozzle head (at maximum water pres-

longer use to the collection points provided for their

sure) into the wash basin before and after each time

disposal.

the device is used.

This helps avoid the potential e ects of incorrect dispo-

• Then use the water pressure regulator to select the

sal on the environment and human health.

desired water pressure. Be-gin on the smallest set-

ting, especially if you have problems with bleeding of

This will contribute to the recycling and other forms of

the gums or when the water jet is used by children.

reutilisation of electrical and electronic equipment.

• Make sure that you hold your head above the wash

Information concerning where the equipment can be

basin. Pass the nozzle along the gums and teeth.

disposed of can be obtained from your local authority.

• After use, please turn the water pressure regulator

back to position „Min“.

• Turn the device o on the handle.

• Please clean the device as described under „Cleaning

and Care“.

Cleaning and Care

• Before cleaning the water jet, remove the mains plug

from the socket. The housing and mains supply must

not be cleaned or immersed in water. The housing

should only be wiped o with a moist soft cloth.

• Pour away the remaining water from the water

container.

05-MD 5503 AEG.indd 2105-MD 5503 AEG.indd 21 02.09.2008 10:32:16 Uhr02.09.2008 10:32:16 Uhr