Philips Luftreiniger: 3 Get started

3 Remove all the lters from the purier.

3 Get started

English

English

Installlters

The air purier comes with all lters tted

inside, but you have to remove the packaging

of the lters before you can use it. Remove all

lters, unpack them, and place them back into

the air purier as described below.

Tip

4 Remove all packaging material from the

•

When you remove or insert lters, place the

lters.

purier against a wall for more stability.

Note

•

Insert the lters in the correct position.

• Make sure you place the lters in the order of

HEPA lter, activated carbon lter, and nally

the pre-lter.

• Make sure that the side with the tag is pointing

towards you.

1 Place your ngers in the recesses of the

5 Put the lters back into the purier.

side panels and gently pull the top part of

the front panel towards you.

2 Gently pull the bottom of the panel out

(1), then lift the top part of the front

panel towards you (2).

2

1

EN

7

6 Place the pre-ler in the purier.

Note

•

Make sure that the side with the two

projections is pointing towards you, and that all

hooks of the pre-lter are properly attached

to the purier.

7 To reattach the front panel, insert the top

hooks into the top of the purier rst (1).

Then, push the panel against the body of

the purier (2).

1

2

8

EN