Samsung PS-50 A450P2 – страница 2
Инструкция к Телевизору Samsung PS-50 A450P2
Screen Mode: 16:9/Wide Zoom/Zoom/4:3
T V
Picture Options
When setting the picture size to Auto Wide in a 16:9 wide TV,
Colour Tone :
Normal
Size : Auto Wide
you can determine the picture size you want to see the 4:3
Screen Mode : 16:9
16:9
WSS (Wide Screen Service) image or nothing. Each individual
Digital NR :
Wide Zoom
European country requires different picture size so this function
Real 100 Hz Demo : Off
Zoom
DNle :
4:3
is intended for users to select it.
HDMI Black Level : Normal
−16:9
: Sets the picture to 16:9 wide mode.
Blue only mode : Off
Screen Burn Protection
−
Wide Zoom: Magnify the size of the picture more than 4:3.
−
Zoom: Magnify the size of the picture vertically on screen.
Move
Enter
Return
−4:3
: Sets the picture to 4:3 normal mode.
➢
This function is available in Auto Wide mode.
➢
This function is not available in Component or HDMI mode.
Digital NR: Off/Low/Medium/High/Auto
If the signal received by the television is weak, you can activate this feature to reduce any static and
ghosting that may appear on the screen.
➢
When the signal is weak, select one of the other options until the best picture is displayed.
Real 100 Hz Demo: Off/On
You can get a clear distinction between “Real 100Hz” and 50Hz, especially when watching sports.
Therefore, when seeing a paused or static image, you will not be able to distinguish between “Real
100Hz” and 50Hz. Demo 100Hz works only with 50Hz signal.
DNIe: Off/Demo/On
This TV includes the DNIe function so as to provide a high visual quality. If you set DNIe to on, you
can view the screen with the DNIe feature activated. If you set the DNIe to Demo, you can view the
applied DNIe and normal pictures on the screen, for demonstration purposes. Using this function, you
can view the difference in the visual quality.
DNIe
TM
➢
(Digital Natural Image engine)
This feature brings you more detailed image with 3D noise reduction, detail enhancement, contrast
enhancement and white enhancement. New image compensation Algorithm gives brighter, clearer,
more detailed image to you. DNIe
TM
technology will fit every signal into your eyes.
➢
This function is not available in PC mode.
➢
DNIe is only available in Dynamic mode.
HDMI Black Level: Normal/Low
Using this function, you can adjust the image quality when the screen burn (appearance of black
level, low contrast, low color, etc.) is encountered by the HDMI input for RGB limited range (16 to
235).
➢
This function is active only when the external input connects to HDMI(RGB signals).
Blue Only Mode: Off/On
This function is for AV device measurement experts. This function displays the blue signal only by
removing the red and green signals from the video signal so as to provide a Blue Filter effect that is
used to adjust the Colour and Tint of video equipment such as DVD players, Home Theaters, etc.
Using this function, you can adjust the Colour and Tint to
T V
Picture Options
preferred values appropriate to the signal level of each video
Colour Tone :
Normal
device using the Red/Green/Blue/Cyan/Magenta/Yellow Colour
Size : Auto Wide
Bar Patterns, without using an additional Blue Filter.
Screen Mode : 16:9
Digital NR : Auto
➢
Blue Only Mode is available when the picture mode is set
Real 100 Hz Demo : Off
to Movie or Standard.
DNle : On
HDMI Black Level : Normal
Screen Burn Protection
Blue only mode : Off
To reduce the possibility of screen burn, this unit is equipped
Screen Burn Protection
with screen burn prevention technology. This technology
Move
Enter
Return
enables you to set picture movement up/down (Vertical Line)
and side to side (Horizontal Dot). The Time setting allows
T V
Screen Burn Protection
you to program the time between movement of the picture in
Pixel Shift
minutes.
White
−
Pixel Shift: Using this function, you can minutely move
Scrolling
pixels on the PDP in horizontal or vertical direction to
Side Gray : Dark
minimize after image on the screen.
• Set
Pixel Shift to Onbypressingthe▲or▼button,then
press the ENTER button.
•Selecttherequiredoptionbypressingthe▲or▼button,
Move
Enter
Return
then press the ENTER button.
Available options: Horizontal Dot, Vertical Line, Time
Continued...
English - 21
BN68-01417F-00.indb 21 2008-04-07 오후 7:11:10
T V
Pixel Shift
➢
Optimum condition for pixel shift;
Pixel Shift :
On
PC TV/Ext/AV/Component/HDMI
Horizontal Dot : 2
Vertical Line : 2
Horizontal Dot 1 2
Time : 2 min
Vertical Line 1 2
Time (minute) 2 2 min
➢
The Pixel Shift value may differ depending on the monitor
Move
Enter
Return
size (inches) and mode.
➢
This function is not available in the Just Scan mode.
−White: This function helps remove after images on the screen by changing the colour of pixels to
white. Use this function when there are remaining after images or symbols on the screen especially
when you displayed a still image on the screen for a long time.
−
Scrolling: This function helps remove after images on the screen by moving all the pixels on the
PDP according to a pattern. Use this function when there are remaining after images or symbols on
the screen especially when you displayed a still image on the screen for a long time.
−
Side Gray: When you watch TV with the screen ratio of 4:3, the screen is prevented from any
damage by adjusting the white balance on both extreme left and right sides.
Dark: When you set the screen ratio to 4:3, it darkens the left and right sides.
Light: When you set the screen ratio to 4:3, it brightens the left and right sides.
➢
To remove after images on the screen, use either White or Scrolling function. Although both of
the two functions remove after images on the screen, Scrolling is more effective.
➢
The after image removal function has to be executed for a long time (approximately 1 hour) to
effectively remove after images on the screen. If after image is not improved after the execution
of the function, repeat the function again.
➢
Press any button on the remote control to cancel this feature.
Resetting the Picture Settings to the Factory Defaults
You can set detailed picture settings.
T V
Picture
Mode : Standard
Cell Light 7
1 Press the MENU button to display the menu.
Contrast 90
Brightness 45
2 Press the ENTER button to select Picture.
Sharpness 50
Colour 50
3 Pressthe▲or▼buttontoselectReset, then press the
Tint G50 R50
Detailed Settings
ENTER button.
Picture Options
Reset : OK
OK
4 Pressthe▲or▼buttontoselectOK or Cancel then press
Cancel
the ENTER button.
Move
Enter
Return
➢
Each mode can be reset.
English - 22
BN68-01417F-00.indb 22 2008-04-07 오후 7:11:10
Sound Features
1 Press the MENU button to display the menu.
T V
Sound
2 Pressthe▲or▼buttontoselectSound, then press the
Mode :
Custom
Equalizer
ENTER button.
SRS TS XT : Off
Auto Volume : Off
3 Selecttherequiredoptionbypressingthe▲or▼button,then
TV Speaker : Off
press the ENTER button.
Select Sound : Main
Available options:
Mode, Equalizer, SRS TS XT, Auto
Volume, TV Speaker, Select Sound
4 When you are satisfied with your setting, press the ENTER
Move
Enter
Return
button.
T V
Equalizer
5 Press the EXIT button to exit.
Mode: Standard/Music/Movie/Speech/Custom
R
+
+
You can select the type of special sound effect to be used
0
0
when watching a given broadcast.
L
-
-
Easy Setting
Balance 100Hz 300Hz 1kHz 3kHz 10kHz
1 Press the TOOLS button on the remote control.
2 Pressthe▲or▼buttontoselectSound Mode.
Move
Adjust
Return
3 Pressthe◄or►buttontoselecttherequiredoption.
Tools
Equalizer: Balance/100Hz/300Hz/1kHz/3kHz/10kHz
Anynet+ (HDMI-CEC)
Picture Mode : Standard
The television has several settings which allow you to control
SoundMode ◄ Custom ►
the sound quality.
Sleep Timer : Off
SRS TS XT : Off
➢
If you make any changes to these settings, the sound
Energy Saving : Off
Dual I-II : Mono
mode is automatically switched to Custom.
Move
Adjust
Exit
SRS TS XT: Off/On
TruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel
content over two speakers. TruSurround delivers a compelling, virtual surround sound experience
through any two-speaker playback system, including internal television speakers. It is fully compatible
with all multichannel formats.
TruSurround XT, SRS and Symbol are trademarks of SRS Labs, Inc.
TruSurround XT technology is incorporated under license from SRS Labs, Inc.
Easy Setting
Tools
Anynet+ (HDMI-CEC)
1 Press the TOOLS button on the remote control.
Picture Mode : Standard
2 Pressthe▲or▼buttontoselectSRS TS XT.
Sound Mode : Custom
Sleep Timer : Off
3 Pressthe◄or►buttontoselectOff or On.
SRSTSXT ◄ Off ►
Energy Saving : Off
Dual I-II : Mono
Auto Volume: Off/On
Move
Adjust
Exit
Each broadcasting station has its own signal conditions,
and so it is not easy to adjust the volume every time the channel is changed. This feature lets you
automatically adjust the volume of the desired channel by lowering the sound output when the
modulation signal is high or by raising the sound output when the modulation signal is low.
TV Speaker: Off/On
If you want to hear the sound through separate speakers, cancel the internal amplifier.
➢
The
+,
- and MUTE buttons do not operate when the TV Speaker is set to Off.
➢
When TV Speaker is set to Off, you can operate only Sound Select (in PIP mode) in Sound
menu.
Sound Select: Main/Sub
When the PIP feature is activated, you can listen to you can operate only Sound Select (in PIP
mode) in Sound menu.
-
Main: Used to listen to the sound of the main picture.
-
Sub: Used to listen to the sound of the sub picture.
English - 23
BN68-01417F-00.indb 23 2008-04-07 오후 7:11:12
Selecting the Sound Mode (depending on the model)
The DUAL I-II button displays/controls the processing and output of the audio signal. When power
is switched on, the mode is automatically preset to either “DUAL-I” or “Stereo”, depending on the
current transmission.
Easy Setting
Tools
1 Press the TOOLS button on the remote control.
Anynet+ (HDMI-CEC)
Picture Mode : Standard
2 Pressthe▲or▼buttontoselectDual I-II.
Sound Mode : Custom
3 Pressthe◄or►buttontoselecttherequiredoption.
Sleep Timer : Off
SRS TS XT : Off
Energy Saving : Off
DualI-II ◄ Mono ►
Move
Adjust
Exit
Type of broadcast On-screen indication
Regular broadcast
Mono (Normal use)
(Standard audio)
Mono
Regular + NICAM Mono NICAM
(Normal)
NICAM
NICAM
Mono
Stereo
NICAM Stereo
stereo
(Normal)
NICAM
NICAM
Mono
NICAM DUAL-I/II
dual-1
dual-2
(Normal)
Regular broadcast
Mono (Normal use)
(Standard audio)
A2
Bilingual or DUAL-I/II Dual I Dual II
Stereo
Mono
Stereo Stereo
(Forced mono)
➢
If the receiving conditions deteriorate, listening will be easier if the mode is set to Mono.
If the stereo signal is weak and automatic switching occurs, switch to Mono.
Connecting Headphones (Sold separately)
You can connect a set of headphones to your set if you wish to watch a TV program
without disturbing other people in the room.
➢
When you insert the head set jack into the corresponding
TV Side Panel
port, you can operate only “Auto Volume” in Sound menu.
➢
Prolonged use of headphones at a high volume may
damage your hearing.
➢
You will not hear sound from the speakers when you connect
headphones to the TV.
➢
The headphone volume and TV volume are adjusted
separately.
15
English - 24
BN68-01417F-00.indb 24 2008-04-07 오후 7:11:12
Time Features
1 Press the MENU button to display the menu.
T V
Setup
Plug & Play
2 Pressthe▲or▼buttontoselectSetup, then press the
Language : English
Time
ENTER button.
Light Effect
: In Watching TV
Wall-Mount Adjustment
3 Pressthe▲or▼buttontoselectTime, then press the
Melody : Off
Entertainment : Off
ENTER button.
Energy Saving : Off
PIP
4 Selecttherequiredoptionbypressingthe▲or▼button,then
press the ENTER button.
Move
Enter
Return
Available options:
Clock Set, Sleep Timer, Timer 1, Timer 2,
Timer 3
T V
Time
Clock Set :
00 : 00
5 When you are satisfied with your setting, press the ENTER
Sleep Timer : Off
button.
Timer 1 : Off
Timer 2 : Off
Timer 3 : Off
6 Press the EXIT button to exit.
Clock Set
You can set the television clock so that the current time is
displayed when pressing the INFO button on the remote
Move
Enter
Return
control. You must also set the time if you wish to use the
automatic on or off timers.
T V
Timer 1
− Pressthe◄or►buttontoselect
Month, Day, Year, Hour,
On Time
00 00 Off
:
or Minute.Setthesebypressingthe▲or▼button.
Off Time
➢
You can set the Month, Day, Year, Hour, or Minute
00 00 Off
:
directly by pressing the numeric buttons on the remote
Repeat
control.
Once
In the event of a power interruption or the set being turned
Volume
➢
off at the supply, the settings for the Clock will be lost.
10
Sleep Timer
Move
Adjust
Return
You can select a time period of between 30 and 180 minutes
after which the television automatically switches to standby
mode.
− Selectthepresettimeinterval(
Off, 30, 60, 90, 120, 150, or
180)forstayingonbypressingthe▲or▼button.
Easy Setting
Tools
1 Press the TOOLS button on the remote control.
Anynet+ (HDMI-CEC)
Picture Mode : Standard
2 Press the ▲or▼ button to select Sleep Timer.
Sound Mode : Custom
3 Press the ◄or► button to select the minute, then press the
SleepTimer ◄ Off ►
SRS TS XT : Off
ENTER button.
Energy Saving : Off
Dual I-II : Mono
Timer 1 / Timer 2 / Timer 3
Move
Adjust
Exit
You can set the On/Off timers so that the television will switch
on or off automatically at the time you select.
☛
You must set the clock first.
− Pressthe◄or►buttontoselecttherequireditembelow.
Pressthe▲or▼buttontoadjusttothesettingsatisfied.
On Time : Select hour, minute, and On/Off. (To activate timer with the setting satisfied, set to On.)
Off Time : Select hour, minute, and On/Off. (To activate timer with the setting satisfied, set to On.)
Repeat : Select Once, Everyday, Mon~Fri, Mon~Sat, or Sat~Sun.
Volume : Select the required volume level.
➢
You can set the hour, minute, directly by pressing the number buttons on the remote control.
☛
Auto Power Off
When you set the timer “On”, the TV will eventually turn off, if no controls are operated for 3 hours
after the TV was turned on by timer. This function is only available in timer “On” mode and prevents
overheating, which may occur if a TV is on for too long time.
English - 25
BN68-01417F-00.indb 25 2008-04-07 오후 7:11:13
Language / Melody / Light Effect / Entertainment /
Energy Saving / PIP
1 Press the MENU button to display the menu.
T V
Setup
2 Pressthe▲or▼buttontoselectSetup, then press the
Plug & Play
Language : English
ENTER button.
Time
Light Effect
: In Watching TV
Wall-Mount Adjustment
3 Selecttherequiredoptionbypressingthe▲or▼button,then
Melody : Off
press the ENTER button.
Entertainment : Off
Energy Saving : Off
PIP
Available options:
Language, Melody, Light Effect,
Entertainment, Energy Saving, PIP
4 When you are satisfied with your setting, press the ENTER
Move
Enter
Return
button.
5 Press the EXIT button to exit.
Language
It is variable depending on the model. When you start using the television for the first time, you must
select the language which will be used for displaying menus and indications.
Light Effect: Off/In Standby/In Watching TV/Always
You can turn on/off the blue LED on the front of TV according to the situation. Use it for saving power
or when the LED dazzles your eyes.
− Off: The blue LED is always off.
− In Standby: The blue LED lights while in Standby mode and it turns off when your TV is turned on.
− In Watching TV: The blue LED lights when watching TV and it turns off when your TV is turned off.
− Always: The blue LED always lights.
➢
Set the Light Effect to Off to reduce the power consumption.
Melody: Off/Low/Medium/High
The TV power on/off melody sound can be adjusted.
Entertainment: Off/Sports/Cinema/Game
Entertainment mode enables you to select the optimal display and sound for sports, cinema and
games.
− Off: Switches the Entertainment function off.
− Sports: Provides the optimal picture and sound quality for sports.
− Cinema: Provides the optimal picture and sound quality for movie watching.
You can experience a richer picture and enhanced sound.
− Game: Provides the optimal picture and sound quality for games. This mode accelerates the
playing speed when using an external game console connected to the TV.
➢
If you set any of the three Entertainment modes to On, the settings will be locked and can not be
adjusted. If you want to make Picture and Sound mode adjustments, the Entertainment mode
must be turned off.
➢
The Entertainment settings are saved for each input source.
Continued...
English - 26
BN68-01417F-00.indb 26 2008-04-07 오후 7:11:14
Energy Saving: Off/Low/Medium/High
This feature adjusts the screen brightness depending on the
Tools
surrounding lighting conditions.
Anynet+ (HDMI-CEC)
− Off: Switches off the Energy Saving mode.
Picture Mode : Standard
− Low: Operates in standard mode regardless of the
Sound Mode : Custom
Sleep Timer : Off
surrounding illumination.
SRS TS XT : Off
− Medium: Enters Medium power saving mode regardless of
EnergySaving ◄ Off ►
the surrounding illumination.
Dual I-II : Mono
− High: Enters maximum power saving mode regardless of
Move
Adjust
Exit
the surrounding illumination.
Easy Setting
1 Press the TOOLS button on the remote control.
2 Pressthe▲or▼buttontoselectEnergy Saving.
3 Pressthe◄or►buttontoselecttherequiredoption.
PIP (Picture in Picture): PIP(On/Off)/Source/Size/Position/Programme
You can display a sub picture within the main picture. In this way you can watch TV programme or
monitor the video input from any connected devices.
T V
PIP
− PIP: On/Off
PIP :
On
You can activate or deactivate the PIP function.
Source : TV
Size :
Table of PIP Settings
Position :
Programme : P 1
Main Picture Sub Picture
Component
Analog TV broadcasts
HDMI1, 2, 3
only Ext1, Ext2, AV
Move
Enter
Return
PC
− Source: TV/Ext.1/Ext.2/AV
You can select a source of the sub-picture.
− Size: / /
You can select a size of the sub-picture.
➢
If main picture is in PC and Component mode, Size is not available.
− Position: / / /
You can select a position of the sub-picture.
➢
In Double( , ) mode, Position cannot be selected.
− Programme
You can select a channel of the sub-picture only when the Source is set to TV.
Setting up Your PC Software (Based on Windows XP)
The Windows display-settings for a typical computer
are shown below. But the actual screens on your PC will
probably be different, depending upon your particular
version of Windows and your particular video card. But even
if your actual screens look different, the same, basic set-up
information will apply in almost all cases. (If not, contact your
computer manufacturer or Samsung Dealer.)
1 Right click the mouse on the Windows Desktop, then click on
Properties.
The Display Properties will be displayed.
2 Click on Settings tab, then set the Display Mode with
reference to the Display Modes Table. You do not need to
change the Colours settings.
3 Click on Advanced. A new settings dialog box will be
displayed.
4 Click on the Monitor tab, then set the Screen refresh rate with reference to the Display Modes
Table. Set the Vertical Frequency and Horizontal Frequency individually if you can do so instead of
setting the Screen refresh rate.
5 Click on OK to close the window, then Click on OK button to the Display Properties window.
Automatic re-booting may commence at this moment.
English - 27
BN68-01417F-00.indb 27 2008-04-07 오후 7:11:14
Input Mode (PC)
Both screen position and size will vary depending on the type of PC monitor and its resolution.
The table below shows all of the display modes that are supported:
D-Sub Input
Horizontal
Vertical
Pixel Clock
Sync
PS42A450/
PS50A450/
Mode Resolution
Frequency
Frequency
Frequency
Polarity
PS42A451
PS50A451
(kHz)
(Hz)
(MHz)
(H/V)
640 x 350
31.469
70.086
25.175
+ / -
✔
✔
IBM
720 x 400
31.469
70.087
28.322
- / +
✔
✔
640 x 480
31.469
59.940
25.175
- / -
✔
✔
640 x 480
37.861
72.809
31.500
- / -
✔
✔
640 x 480
37.500
75.000
31.500
- / -
✔
✔
800 x 600
37.879
60.317
40.000
+ / +
✔
✔
800 x 600
48.077
72.188
50.000
+ / +
✔
✔
VESA
800 x 600
46.875
75.000
49.500
+ / +
✔
✔
1024 x 768
48.363
60.004
65.000
- / -
✔
✔
1024 x 768
56.476
70.069
75.000
- / -
✔
✔
1024 x 768
60.023
75.029
78.750
+ / +
✔
✔
1360 x 768
47.712
60.015
85.500
+ / +
✔
HDMI/DVI Input
Horizontal
Vertical
Pixel Clock
Sync
PS42A450/
PS50A450/
Mode Resolution
Frequency
Frequency
Frequency
Polarity
PS42A451
PS50A451
(kHz)
(Hz)
(MHz)
(H/V)
640 x 480
31.469
59.940
25.175
- / -
✔
✔
800 x 600
37.879
60.317
40.000
+ / +
✔
✔
VESA
1024 x 768
48.363
60.004
65.000
- / -
✔
✔
1360 x 768
47.712
60.015
85.500
+ / +
✔
When using an HDMI/DVI cable connection, you must use the HDMI IN 2 jack.
The interlace mode is not supported.
The set might operate abnormally if a non-standard video format is selected.
Separate and Composite modes are supported. SOG is not supported.
For the PS42A450/PS42A451, PC text quality is optimum in VESA mode(1024 x 768@60Hz).
For the PS50A450/PS50A451, PC text quality is optimum in VESA mode (1360 x 768@60Hz).
English - 28
BN68-01417F-00.indb 28 2008-04-07 오후 7:11:15
Setting the PC
➢
Preset to the PC mode by pressing the SOURCE button.
T V
Picture
Mode :
Standard
1 Press the MENU button to display the menu.
Cell Light 7
Contrast 95
2 Pressthe▲or▼buttontoselectPicture, then press the
Brightness 45
Sharpness 50
ENTER button.
Auto Adjustment
Screen Adjustment
Detailed Settings
3 Selecttherequiredoptionbypressingthe▲or▼button,then
Picture Options
press the ENTER button.
Reset : OK
4 When you are satisfied with your setting, press the ENTER
Move
Enter
Return
button.
5 Press the EXIT button to exit.
Auto Adjustment in Progress
Please wait.
Auto Adjustment :
Auto adjustment allows the PC screen of set to self-adjust to
the incoming PC video signal.
The values of fine, coarse and position are adjusted
Tools
Anynet+ (HDMI-CEC)
automatically.
Picture Mode : Standard
Sound Mode : Custom
Easy Setting
Sleep Timer : Off
SRS TS XT : Off
1 Press the TOOLS button on the remote control.
Energy Saving : Off
PIP
2 Pressthe▲or▼buttontoselectAuto Adjustment, then
Auto Adjustment
press the ENTER button.
Enter
ExitMove
Screen Adjustment: Coarse/Fine/Position/Image Reset
T V
Screen Adjustment
Coarse/Fine
Coarse 50
The purpose of picture quality adjustment is to remove or
Fine 11
Position
reduce picture noise.
Image Reset
If the noise is not removed by Fine-tuning alone, then adjust
the frequency as best as possible (coarse) and Fine-tune
again.
After the noise has been reduced, re-adjust the picture so that
it is aligned on the center of screen.
Move
Enter
Return
1 Pressthe▲or▼buttontoselect
Coarse or Fine, then
press the ENTER button.
T V
Position
2 Pressthe◄or►buttontoadjustthescreenquality,
vertical stripes may appear or the picture may be blurry.
Press the ENTER button.
Position
Adjust the PC’s screen positioning if it does not fit the TV
screen.
1 Adjustthepositionbypressingthe▲/▼/◄/►button.
2 Press the ENTER button.
Move
Enter
Return
Image Reset
You can replace all image settings with the factory default
Image Reset is completed.
values.
English - 29
BN68-01417F-00.indb 29 2008-04-07 오후 7:11:15
Connecting Anynet
+
Devices
The Anynet
+
system supports AV devices supporting Anynet
+
only.
Check if there is an Anynet
+
mark on the AV device to be connected to the TV.
To directly connect to TV
Connect the [HDMI 1],
[HDMI 2] or [HDMI 3] jack on
the TV and the HDMI OUT jack
of the corresponding Anynet
+
device using the HDMI cable.
To connect to Home Theatre
1 Connect the [HDMI 1],
[HDMI 2] or [HDMI 3]
jack on the TV and the
HDMI OUT jack of the
corresponding Anynet
+
device using the HDMI
cable.
2 Connect the HDMI IN jack
of the home theatre and
the HDMI OUT jack of the
corresponding Anynet
+
device using the HDMI
cable.
➢
Connect only one receiver.
➢
You can connect an Anynet
+
device using the HDMI cable. Some HDMI cables may not support
Anynet
+
functions.
➢
Anynet
+
works when the AV device supporting Anynet
+
is in the Standby or On status.
➢
Anynet
+
supports up to 8 AV devices in total.
English - 30
English - 30
What is Anynet
+
?
Anynet
+
is an AV network system that enables an easy-to-use AV interface for users by controlling
all connected AV devices through the Anynet
+
menu when Samsung Electronics AV devices are
connected.
TV
Anynet
+
Device 1 Anynet
+
Device 2
Anynet
+
Device 3
HDMI Cable
HDMI Cable
HDMI Cable
TV
Anynet
+
Device 1 Anynet
+
Device 2
HDMI Cable
HDMI Cable
Home Theatre
Anynet
+
Device 3
HDMI Cable
HDMI Cable
English - 30
BN68-01417F-00.indb 30 2008-04-07 오후 7:11:16
Setting Up Anynet
+
The following settings are to use Anynet
+
functions.
TV P 1
Using the Anynet
+
Function
View TV
1 Press the MENU button to display the menu.
Select Device
Pressthe▲or▼buttontoselectInput, then press the
Record
ENTER button.
Menu on Device
2 Pressthe▲or▼buttontoselectAnynet
+
(HDMI-CEC), then
Device Operation
press the ENTER button.
Receiver :Off
3 Pressthe▲or▼buttontoselectSetup, then press the
Setup
ENTER button.
Move
Enter
4 Pressthe▲or▼buttontoselectAnynet
+
(HDMI-CEC), then
Return
press the ENTER button.
Setup
5 Pressthe▲or▼buttontoselectOn, then press the ENTER
Anynet
+
(HDMI-CEC)
: Off
Off
button.
Auto Turn Off
: Off
➢
The Anynet
+
(HDMI-CEC) function is enabled.
On
+
Searching Connections
➢
If you select Off, Anynet
(HDMI-CEC) is disabled.
➢
When the Anynet
+
(HDMI-CEC) function is disabled, all the
+
Enter ReturnMove
Anynet
related operations are deactivated.
Turning an Anynet
+
Device Off Automatically when the TV is Turned Off
4 Pressthe▲or▼buttontoselectAuto Turn Off, then press
the ENTER button.
Setup
5 Pressthe▲or▼buttontoselectYes, then press the
Anynet
+
(HDMI-CEC)
: On
ENTER button.
Auto Turn Off :
: Off
➢
The Auto Turn Off function is enabled.
No
➢
If you select No, the Auto Turn Off function is canceled.
Searching Connections
Yes
Press the EXIT button to exit.
➢
The Select Device setting of the TV remote control is to be set
Move
Enter Return
to TV to use the Anynet
+
function.
➢
If you set Auto Turn Off to Yes, connected external devices are also turned off when the TV is turned
off. However, if the device is recording, it may not be turned off.
Scanning and Switching between Anynet
+
Devices
1 Press the MENU button to display the menu.
Pressthe▲or▼buttontoselectInput, then press the
TV P 1
ENTER button.
View TV
DVDR1
2 Pressthe▲or▼buttontoselectAnynet
+
(HDMI-CEC), then
Select Device
DVDR2
press the ENTER button.
Record
DVD1
3 Pressthe▲or▼buttontoselectSelect Device, then press
Menu on Device
DVD2
the ENTER button.
Device Operation
4 Pressthe▲or▼buttontoselecttoaparticulardeviceand
Receiver :Off
press the ENTER button.
Setup
It is switched to the selected device.
Move
Enter
5 Ifyoucannotfindadeviceyouwant,pressthe▲or▼button
Return
to select Searching Connections, then press the ENTER
button.
Setup
The meassage Configuring Anynet
+
connection... is
Anynet
+
(HDMI-CEC)
: On
displayed. When searching devices completes, the connected
Auto Turn Off
: Yes
devices are listed in the Anynet
+
menu.
Searching Connections
➢
Switching to the selected devices may take up to 2 minutes.
You cannot cancel the operation during the switching
operation.
Enter ReturnMove
➢
The time required to scan for devices is determined by the number of connected devices.
➢
When the device scan is complete, the number of found devices is not displayed.
➢
Although the TV automatically scans devices when it is turned on using the POWER button, devices
connected when the TV is on or under a specific circumstance are not displayed in the device list.
Therefore select Searching Connections menu to search devices.
➢
If you have selected external input mode by pressing the SOURCE button, you cannot use the
Anynet
+
function. Make sure to switch to an Anynet
+
device by using the TOOLS button.
Continued...
English - 31
BN68-01417F-00.indb 31 2008-04-07 오후 7:11:17
Anynet
+
Menu
The Anynet
+
menu changes depending on the type and status of the Anynet
+
devices connected
to the TV.
Anynet
+
Menu Description
View TV Switches from Anynet
+
to TV broadcast mode.
Select Device Your TV connects to the corresponding device.
Record Starts a recording. (This menu works only for a device supporting
recording.)
Menu on Device Shows the menu of the connected device.
Example. When a DVD Recorder is connected, the DVD Recorder’s
title menu appears.
Device Operation Shows the play control menu of the connected device.
Example. When a DVD Recorder is connected, the play control
menu of the DVD Recorder appears.
Receiver Sound is output through the receiver.
Setup You can set the environment for using Anynet
+
.
TV Remote Control Buttons Available in Anynet
+
Mode
Device Type Operating Status Available Buttons
After switching to the
Numeric buttons
device, when the menu of
▲/▼/◄/►/ENTER buttons
the corresponding device is
Colour buttons
displayed on the screen.
EXIT button
Anynet
+
Device
After switching to the device,
while playing a file
English - 32
W.LINK
(Backward search)
W.LINK
(Forward search)
W.LINK
(Stop)
W.LINK
W.LINK
(Play/Pause)
After switching to the device,
Device with built-in Tuner
when you are watching a TV
P / button
programme
Audio Device When a Receiver is activated
W.LINK
/
W.LINK
button
MUTE button
➢
The Anynet
+
function only works when the remote control is set to TV.
➢
The REC button works only while in the recordable state.
➢
You cannot control Anynet
+
devices using the buttons on the side of the TV. You can control Anynet
+
devices only using the TV remote control.
➢
The TV remote control may not work under certain conditions. In this case, reselect the Anynet
+
device.
➢
The Anynet
+
functions don’t operate for the products from other manufacturers.
➢
In Anynet
+
mode, the colour buttons may not work properly.
➢
The
W.LINK
,
W.LINK
operations may differ depending on the device.
Recording
You can make a recording of a TV programme using a recorder.
Press the REC button.
Recording begins. (Only when the Anynet
+
enabled recording device is connected.)
➢
The current TV programme is recorded in the Watching TV status. If you are watching video from
another device, the video from the device is recorded.
➢
You can also record the source streams by selecting Record after pressing the TOOLS button.
➢
Before recording, check whether the antenna jack is properly connected to the recording device.
For the antenna connection to the recording device, refer to its user manual.
BN68-01417F-00.indb 32 2008-04-07 오후 7:11:18
Listening through a Receiver
You can listen to sound through a receiver instead of the TV speaker.
1 Press the MENU button to display the menu.
Pressthe▲or▼buttontoselect
Input, then press the ENTER button.
TV P 1
2 Pressthe▲or▼buttontoselectAnynet
+
(HDMI-CEC), then press the ENTER
View TV
button.
Select Device
3 Pressthe▲or▼buttontoselectReceiver, then press the ENTER button.
Record
4 Pressthe◄or►buttontoselecttoOn, then press the ENTER button.
Menu on Device
Now you can listen to sound through the receiver.
Device Operation
5 Press the EXIT button to exit.
Receiver :On
Setup
➢
When the receiver is set to On, you can listen to the TV sound through the 2-channel
receiver.
Move
Enter
Exit
➢
If the receiver is exclusively for a home theater only (supporting audio only), it may
not appear in the device list.
➢
Only when you have connected the optical jack of the TV and the receiver properly, does Receiver work.
➢
In case of a content with copyright problems, listening through the receiver may not properly operate.
Check Points before Requesting Service
Symptom Solution
Anynet
+
does not work. ■ CheckifthedeviceisanAnynet
+
device. The Anynet
+
system
supports Anynet
+
devices only.
■ Connectonlyonereceiver.
■ CheckiftheAnynet
+
device power cord is properly connected.
■
Check the Anynet
+
device’s Video/Audio/HDMI cable connections.
■ CheckwhetherAnynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup
menu.
■ CheckwhethertheTVremotecontrolisinTVmode.
■ CheckwhetheritisAnynet
+
exclusive remote control.
■ Anynet
+
doesn’t work at a certain condition. (Searching channels)
■ WhenconnectingorremovingtheHDMIcable,pleasemakesureto
search devices again or restart your TV.
■ CheckiftheAnynet
+
Function of Anynet
+
device is set on.
I want to start Anynet
+
. ■ CheckiftheAnynet
+
device is properly connected to the TV and check
if the Anynet
+
(HDMI-CEC) is set to On in the Anynet
+
Setup menu.
■ Pressthe
TV button on the TV remote control to switch to TV. Then
press the TOOLS button to show the Anynet
+
menu and select a
menu you want.
I want to exit Anynet
+
. ■ SelectView TV in Anynet
+
menu.
■ Pressthe
SOURCE button on the TV remote control and select a
device other than Anynet
+
devices.
■ Pressanyof
P, CH LIST, and PRE-CH to change to the
TV mode. (Note that the channel button operates only when a tuner-
embedded Anynet
+
device is not connected.)
The message Connecting to
■ YoucannotusetheremotecontrolwhenyouareconfiguringAnynet
+
Anynet
+
device… appears on
or switching to a view mode.
the screen.
■ UsetheremotecontrolwhentheAnynet
+
setting or switching to view
mode is complete.
The Anynet
+
device does not
■ YoucannotusetheplayfunctionwhenPlug&Playisinprogress.
play.
The connected device is not
■ CheckwhetherornotthedevicesupportsAnynet
+
functions.
displayed.
■ CheckwhetherornottheHDMIcableisproperlyconnected.
■ CheckwhetherAnynet
+
(HDMI-CEC) is set to On in the Anynet
+
setup
menu.
■ SearchAnynet
+
devices again.
■ YoucanconnectanAnynet
+
device using the HDMI cable only. Some
HDMI cables may not support Anynet
+
functions.
The TV programme cannot be
■ Checkwhethertheantennajackontherecordingdeviceisproperly
recorded.
connected.
English - 33
BN68-01417F-00.indb 33 2008-04-07 오후 7:11:19
Teletext Feature (depending on the model)
Most television stations provide written information services via teletext. The index page of the
teletext service gives you information on how to use the service. In addition, you can select
various options to suit your requirements by using the remote control buttons.
☛
For teletext information to be displayed correctly, channel reception must be stable. Otherwise,
information may be missing or some pages may not be displayed.
1
TV
Exit from the teletext display (depending on the model)
2
(store)
Used to store the teletext pages.
3
(size)
Press to display the double-size letters in the upper half of the
screen. For lower half of the screen, press it again.
To display normal screen, press it once again.
4
(reveal)
Used to display the hidden text (answers to quiz games, for
example). To display normal screen, press it again.
5
Coloured buttons (red/green/yellow/blue)
If the FASTEXT system is used by a broadcasting company, the
different topics covered on a teletext page are colour-coded and
can be selected by pressing the coloured buttons. Press one
of them corresponding to the required. The page is displayed
with other coloured information that can be selected in the same
way.
To display the previous or next page, press the corresponding
coloured button.
6
(teletext on/mix)
Press to activate teletext mode after selecting the channel
providing the teletext service. Press it twice to overlap the
teletext with the current broadcasting screen.
7
(mode)
Press to select the teletext mode (LIST/FLOF).
If you press it in the LIST mode, it switches into the List save
mode.
In the List save mode, you can save teletext page into list using
the (store) button.
8
(sub-page)
Used to display the available sub-page.
9
(page up)
Used to display the next teletext page.
0
(page down)
Used to display the previous teletext page.
!
(index)
Used to display the index (contents) page at any time while you
are viewing teletext.
@
(hold)
Used to hold the display on a given page if the selected page is
linked with several secondary pages
which follow on automatically. To resume, press it again.
#
(cancel)
Used to display the broadcast when searching for a page.
➢
You can change teletext pages by pressing the numeric buttons
on the remote control.
Continued...
English - 34
BN68-01417F-00.indb 34 2008-04-07 오후 7:11:21
The teletext pages are organized according to six categories:
Part Contents
A
Selected page number.
B
Broadcasting channel identity.
C
Current page number or search indications.
D
Date and time.
E
Text.
F
Status information.
FASTEXT information.
➢
Teletext information is often divided between several pages
displayed in sequence, which can be accessed by:
Entering the page number
Selecting a title in a list
Selecting a coloured heading (FASTEXT system)
➢
Press the TV button to exit from the teletext display.
English - 35
BN68-01417F-00.indb 35 2008-04-07 오후 7:11:22
Wall Mount Kit Specifications (VESA)
Install your wall mount on a solid wall perpendicular to the floor.
When attaching to other building materials, please contact your nearest dealer.
If installed on a ceiling or slanted wall, it may fall and result in severe personal injury.
Product Family inch VESA Spec. (A * B) Standard Screw Quantity
23 ~ 26 200
*
100 M4
32 ~ 40 200
*
200 M6
400 * 400
46 ~ 52
600 * 400
LCD-TV
4
700 * 400
57
(No VESA)
M8
57 ~ 70 800 * 400
80 ~ 1400 * 800
400 * 400
42 ~ 58
4
600 * 400
676 * 407
PDP-TV
63
6
(No VESA)
M8
63 ~ 70 800 * 400 4
80 ~ 1400 * 800 4
➢
We provided the standard dimensions for wall mount kits as shown in the table above.
➢
When purchasing our wall mount kit, a detailed installation manual and all parts necessary for
assembly are provided.
➢
Do not use screws longer than the standard dimension, as they may cause damage to the inside of
the TV set.
➢
For wall mounts that do not comply with the VESA standard screw specifications, the length of the
screws may differ depending on their specifications.
➢
Do not use screws that do not comply with the VESA standard screw specifications.
Do not use fasten the screws too strongly, this may damage the product or cause the product to fall,
leading to personal injury. Samsung is not liable for these kinds of accidents.
➢
Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall
mount is used or the consumer fails to follow the product installation instructions.
➢
Our 57” and 63” models do not comply with VESA Specifications. Therefore, you should use our
dedicated wall mount kit for this model.
➢
Do not exceed 15 degrees tilt when mounting this TV.
Do not install your Wall Mount Kit while your TV is turned on.
It may result in personal injury due to electric shock.
English - 36
BN68-01417F-00.indb 36 2008-04-07 오후 7:11:22
Wall- mount adjustment (Sold separately)
Once the auto wall mount is installed, the position of your TV can be easily adjusted.
Rear Panel Auto Wall-Mount
Serial Cable(1P to 1P)(Not supplied)
Entering the menu
1 Pressthe▲,▼,◄or►buttononyourremotecontrol.
T V
Setup
➢
The Wall Mount Adjustment screen is displayed.
Plug & Play
Language : English
➢
If the Wall Mount Adjustment screen is not displayed
Time
Light Effect
: In Watching TV
when clicking on a direction button while watching your
Wall-Mount Adjustment
TV, use the menu to display that screen.
Melody : Off
Entertainment : Cinema
• Press the
MENU button to display the menu. Press the
Energy Saving : Off
PIP
▲or▼buttontoselect
Setup, then press the ENTER
button.
•Pressthe▲or▼buttontoselect
Wall-Mount
Move
Enter
Return
Adjustment, then press the ENTER button.
Wall-Mount Adjustment
Remembering the Position
►
►
►
►
2 Adjusttothedesiredpositionusingthe▲,▼,◄,►buttons.
►
►
➢
If you press an arrow button when no OSD is displayed
►
►
on the TV screen, the Adjustment screen appears.
➢
Press the INFObuttontoreset.Pressthe◄or►button
321Position
to select Yes, then press the ENTER button. The position
Adjust
Save Center
is initialized to the default setting.
3 Press the blue button.
Pressthe▲and▼buttonstoselectasavemodefrom
either Position1, Position2 or Position3 in order to save the
current position.
➢
To not save the current position, press the RETURN
Save
button.
Select a mode to Save.
➢
When selecting a save mode, you cannot use the Colour
buttons.
Position 1
Position 2
4
Press the ENTER button to save.
Position 3
➢
When Position1 is selected, the message Current
position saved as Position1 is displayed.
Move
Enter
Return
5
Press the ENTER button.
➢
The saved Position appears on the left side of the OSD.
English - 37
BN68-01417F-00.indb 37 2008-04-07 오후 7:11:24
Moving to the remembered position
1
Complete Step 1 of Entering the menu.
Wall-Mount Adjustment
Position 1
2 Pressing a Colour (Red, Green, Yellow) button moves the
►
►
auto wall mount to the saved position.
►
►
►
►
➢
You can move the wall mount to one of the 3 pre-set
►
►
positions by pressing the Red (Position 1), Green
(Position 2) or Yellow (Position 3) buttons.
321Position
➢
If you adjust the position after moving to a pre-set
Adjust
Save Center
position, the position display will disappear.
➢
For installation, refer to the Installation Manual provided with
the wall mount.
➢
For product installation and the installation and moving of the
wall mount, make sure to consult a specialized installation
company.
➢
This installation manual is to be used when attaching the wall
mount to a wall. When attaching to other building materials,
please contact your nearest dealer.
➢
The auto wall mount will not work when Anynet+ is operating.
➢
42 inches model is not compatible with the older wall mount
model (WMN5090A).
How to assemble the Stand-Base (depending on the model)
Using the 6 screws for securing the stand base and the
In case of installing your TV on the wall,
monitor, firmly attach the monitor to the stand base.
close the cover (1) on the stand-base
(The exterior of the set may be different than the picture.)
connection part using two screws for
hiding.
Warning
Firmly secure the stand to the TV
before moving it, as the stand may
fall and could cause serious injury.
➢
Two or more people should carry
the TV. Never lay the TV on the
floor because of possible damage
to the screen.
Always store the TV upright.
English - 38
BN68-01417F-00.indb 38 2008-04-07 오후 7:11:26
Troubleshooting
Before contacting the Samsung after-sales service, perform the following simple checks.
If you cannot solve the problem using the instructions below, note the model and serial number of
the television and contact your local dealer.
No sound or picture
Check that the mains lead has been connected to a wall socket.
Check that you have pressed the (Power) button (On/Off) on the front panel or press the POWER
button on the remote control.
Check the picture contrast and brightness settings.
Check the volume.
Check if TV Speaker is set to Off.
Normal picture but no sound
Check the volume.
Check whether the volume MUTE button on the remote control has been pressed.
No picture or black and white picture
Adjust the colour settings.
Check that the broadcast system selected is correct.
Sound and picture interference
Try to identify the electrical appliance that is affecting the television, then move it further away.
Plug the television into a different main socket.
Blurred or snowy picture, distorted sound
Check the direction, location and connections of your aerial.
This interference often occurs due to the use of an indoor aerial.
Remote control malfunctions
Replace the remote control batteries.
Clean the upper edge of the remote control (transmission window).
Check that the “+” and “–” ends of the batteries are inserted correctly.
Check that the batteries are drained.
Screen is black and power indicator light blinks steadily
On your computer check; Power, Signal Cable.
The TV is using its power management system.
Move the computer’s mouse or press any key on the keyboard.
On your equipment check (STB, DVD, etc) ; Power, Signal Cable.
The TV is using its power management system.
Press the Source button on the panel or remote control.
Turn the TV off and on.
The damaged picture appears in the corner of the screen.
If Just Scan is selected in some external devices, the damaged picture may appear in the corner of
the screen. This symptom is caused by external devices, not TV.
The “Resets all settings to the default values” message appears.
This appears when you press and hold the EXIT button for a while. The product settings are reset to
the factory defaults.
English - 39
BN68-01417F-00.indb 39 2008-04-07 오후 7:11:27
Specifications
The descriptions and characteristics in this booklet are given for information purposes only and
are subject to modification without notice.
Model Name PS42A450/PS42A451 PS50A450/PS50A451
Screen Size (Diagonal) 42 inch 50 inch
PC Resolution 1024 x 768 @ 60 Hz 1360 x 768 @ 60 Hz
Sound (Output) 10 W + 10 W 10 W + 10 W
Dimension (WxHxD)
Body
1055 x 725 x 94 mm
1231 x 756 x 95 mm
With stand
1055 x 725 x 316 mm
1231 x 756 x 316 mm
Weight
Body
27 Kg
35 Kg
With stand
31 Kg
37 Kg
Environmental
Considerations
Operating Temperature
10 °C to 40 °C (50 °F to 104 °F)
Operating Humidity
10% to 80%, non-condensing
Storage Temperature
-20 °C to 45 °C (-4 °F to 113 °F)
Storage Humidity
5% to 95%, non-condensing
➢
This device is a Class B digital apparatus.
Design and specifications are subject to change without prior notice.
For the power supply and Power Consumption, refer to the label attached to the product.
English - 40
BN68-01417F-00.indb 40 2008-04-07 오후 7:11:27