Samsung LE-37 B530 P7W: ABOUT ANYNET +

English - 24

TV Remote Control Buttons Available in Anynet

+

Mode

Device Type Operating Status Available Buttons

After switching to the device, when the

Numeric buttons

menu of the corresponding device is

▲/▼/◄/►/wheel/ENTER

E

buttons

Anynet

+

Device

displayed on the screen.

Colour buttons / EXIT button

After switching to the device, while playing

π

(Backward search) /

µ

(Forward search) /

∫

(Stop) /

a le

∂

(Play) /

∑

(Pause)

Device with built-

After switching to the device, when you

in Tuner

are watching a TV programme

P

>

/ P

<

button

Audio Device When Receiver is activated Volume / MUTE button

N

The Anynet

+

function only works when the active source on the TV remote control is set to TV.

N

The

∏

button works only while in the recordable state.

N

You cannot control Anynet

+

devices using the buttons on the TV. You can control Anynet

+

devices only using the TV remote

control.

N

The TV remote control may not work under certain conditions. If this occurs, reselect the Anynet

+

device.

N

The Anynet

+

functions do not operate with other manufacturers’ products.

N

The

π

,

µ

operations may differ depending on the device.

¦

Recording

You can make a recording of a TV programme using a Samsung recorder.

1.

Press the TOOLS button. Press the ENTER

E

button to select Anynet+ (HDMI-CEC).

View TV

2.

Press the ▲ or ▼ button to select Record: (device_name), then press the ENTER

E

Device List

button. Recording begins.

Record : DVDR

DVDR Operation

N

When there is more than one recording device

Receiver : On

When multiple recording devices are connected, the recording devices are listed.

Setup

Press the ▲ or ▼ button to select a recording device and press the ENTER

E

U

Move

E

Enter

R

Return

button. Recording begins.

N

When the recording device is not displayed

Select Device List and press the red button to search devices.

3.

Press the EXIT button to exit.

N

You can record the source streams by selecting Record: (device_name).

N

Pressing the

∫

button will record whatever you are currently watching. If you are watching video from another device, the

video from the device is recorded.

N

Before recording, check whether the antenna jack is properly connected to the recording device. To properly connect an

antenna to a recording device, refer to the recording device’s users manual.

¦

Listening through a Receiver (Home Theatre)

You can listen to sound through a receiver instead of the TV speaker.

1.

Press the TOOLS button. Press the ENTER

E

button to select Anynet+ (HDMI-CEC).

2.

Press the ▲ or ▼ button to select Receiver. Press the ◄ or ► button to select On or Off.

3.

Press the EXIT button to exit.

N

If your receiver supports audio only, it may not appear in the device list.

N

The receiver will work when you have properly connected the optical in jack of the receiver to the DIGITAL AUDIO OUT

(OPTICAL) jack of the TV.

N

When the Home Theatre receiver is set to On, you can hear sound output from the TV’s Optical jack. When the TV is

displaying a DTV(air) signal, the TV will send out 5.1 channel sound to the Home theatre receiver. When the source is a digital

component such as a DVD and is connected to the TV via HDMI, only 2 channel sound will be heard from the Home Theatre

receiver.

N

If there is a power interruption to the TV when the Receiver is set to On (by disconnecting the power cord or a power failure),

the Speaker Select may be set to External Speaker when you turn the TV on again. (see page 17)