Samsung DS5014D: BASIC FEATURES

BASIC FEATURES: Samsung DS5014D

BASIC FEATURES

1. Before Making / Answering a Call

This section provides you with information on how to make or answer a call by using the handset or

speakerphone.

Calling Methods

Using a handset

This function allows you to lift the handset

and make a call.

Using a speakerphone

This function allows you to make a call

through the speakerphone without lifting

the handset.

Call Answering Methods

Using a handset

This function allows you to lift the handset

and answer a call.

Using a speakerphone

This function allows you to answer

a call through the speakerphone without

lifting the handset.

© SAMSUNG Electronics Co., Ltd. Page 33

BASIC FEATURES

2. Intercom Calls

This function is used when you want to make a call to other stations.

Assigning the Names to Your Extension

You can assign a name of up to 11 letters to your extension.

This allows other extension users with display stations to call you using the directory dial feature and to see

your name when you call them.

1.

Press the

[Transfer]

button.

2.

Press Dial

[1] [0] [4]

.

3.

Enter the name.

Refer to the ‘

Things You Should Know

in this guide for entering characters.

4.

Save the name by pressing

the

[Transfer]

button.

Page 34 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Calling an Extension Number

1.

Pick up the handset and check

for dial tone.

2.

Dial the extension number or station group

number. Wait until the other party answers

the call. If a short signal tone(not a ringing

tone) is heard, the receiving extension has

set up the Voice Announce or Automatic

Answer function.

3.

Replace the handset or press the

[End]

button

to finish the call.

- If you have a [DSS] button assigned to an extension number or station group, press this

button instead of dialling the corresponding station number.

NOTE

© SAMSUNG Electronics Co., Ltd. Page 35

BASIC FEATURES

Answering an Intercom Call

1.

When the Digital phone rings,

pick up the handset or press

the [Speaker] button or

[Send]

button.

2.

To finish the call replace the handset

or press either the

[Speaker]

or

[End]

button.

Voice Page Announce Mode

(Intercom Calls Only)

When another station calls you, a short signal tone will be heard followed by the caller’s announcement.

1.

To answer the call, pick up the handset

or press the

[Send]

button.

2.

To end the call, replace

the handset or press either the

[End]

or

[Speaker]

button.

Page 36 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Automatic Answer Mode (Intercom Calls Only)

When another station calls you, a short signal tone will be heard and then the Digital phone automatically

answers the call.

1.

The microphone and speaker are

turned on and you can communicate

hands-free.

2.

For a private conversation, lift the handset.

3.

To end the call, replace the handset

or press either the

[End]

or

[Speaker]

button.

© SAMSUNG Electronics Co., Ltd. Page 37

BASIC FEATURES

Busy Station Callback

When the called station is busy, you can set a busy station callback. When the busy station becomes free,

your Digital phone will ring. If you pick up the Digital phone, the other station will begin to ring.

1.

When you hear a busy signal, press the

[CBK]

[CBK]

button or dial

[4] [4]

. Or, press

the Soft button corresponding to

[CBK]

on the LCD panel.

2.

When you hear the confirmation signal,

replace the handset.

3.

When the reserved station becomes

free, your Digital phone rings.

CALL BACK

The ‘CALL BACK’ message will appear

on the LCD screen.

4.

Lift the handset or press

the

[Speaker]

or

[Send]

button

to

call the now idle station.

5.

To end the call, replace the handset

or press either the

[Speaker]

or

[End]

button.

- If you do not answer the Callback within 30 seconds, the callback will be cancelled.

If a callback is set up, the [CBK] button’s LED, if programmed, will light.

NOTE

Page 38 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Busy Station Camp-On

When you call another station and receive a busy signal, you can give the called station off-hook ring tone and

wait for a little while.

1.

Press the

[CAMP]

button or dial

[4] [5]

.

[CAMP]

Or, press the Soft button corresponding

to the

[CAMP]

on the LCD screen.

2.

The called station will receive

off-hook ring tone repeated every few seconds

and an available [Call] button will flash to

indicate your call is waiting.

3.

Wait for the called party to answer.

The called station must release its first call

or place it on hold before answering

your camp-on.

Calling Your System Operator

Dial

[9]

to call your system operator or operator

group. If you want to call a specific operator,

dial that person’s extension number.

© SAMSUNG Electronics Co., Ltd. Page 39

BASIC FEATURES

3. Outside Calls

This function is used when you want to make an external call using any available trunk line.

Calling Outside numbers

You can use a handset or speakerphone when calling an external number.

To make an external call with a handset, follow the procedures below.

1.

Pick up the handset.

2.

Press the trunk or trunk group button or

or dial the trunk group access

code(e.g., 0).

3.

Dial the telephone number

you want to call.

4.

Finish your call by replacing

the handset or pressing the

[End]

button.

- If the hot keypad feature is used, you can make an external call without picking up

a handset by dialling the trunk access code.

NOTE

Page 40 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

To make an external call with a speakerphone, follow the procedures below.

1.

Press the

[Speaker]

button.

2.

Press the trunk line or dial the trunk

access code.

3.

Dial the telephone number.

4.

Finish the call, by pressing

the

[Speaker]

button.

- If the LCR(Least Cost Routing) feature is enabled on the OfficeServ system, press

the [LCR] button or dial the LCR access code.

NOTE

© SAMSUNG Electronics Co., Ltd. Page 41

BASIC FEATURES

Authorization Code and Account Code

Authorization Code

If your OfficeServ system is programmed

to require you to enter an authorization code

before making a call, dial [*] plus a valid code

before selecting a trunk line.

Account Code

If your OfficeServ system is programmed to

require you to enter an account code before

making a call, press the

[ACCT]

button

or dial

[4] [7]

plus a valid code,

press the

[ACCT]

button again and

then select a trunk line.

- Ask your System Administrator for more information on authorization codes and

account codes.

NOTE

Answering an Outside Call

If you lift up the handset when the Digital phone is

ringing, you are automatically connected to

the ringing call. Or, press the

[Send]

button

to automatically answer on the speakerphone.

- If a call is flashing at your Digital phone but not ringing, you must press the flashing

button to answer.

NOTE

Page 42 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Universal Answer

External calls may be programmed to ring

through an external speaker. In this case,

dial

[6] [7]

or the press

[UA]

button to answer

the call.

New Call

Press the

[NEW]

button to disconnect

your existing call, wait for dial tone and

then make a new call on the same line.

If this

[NEW]

button does not appear on your

Digital phone, press the Soft button corresponding

to

[NEW]

on the LCD screen.

Busy Line Queuing With Callback

If there are no available trunk lines, you will hear busy tone when you try to make an external call, you can

set a callback. When a line becomes free, your Digital phone will ring. You can reserve up to 5 callbacks for

extension or trunk calls.

1.

If you receive a busy tone when trying to

[CBK]

access a trunk line ,

press the

[CBK]

button or dial

[4] [4]

.

Or, press the Soft button corresponding

to

[CBK]

on the LCD screen.

2.

When confirmation tone is heard,

put down the handset.

3.

When the line becomes free,

the system will call you back.

© SAMSUNG Electronics Co., Ltd. Page 43

BASIC FEATURES

4.

Lift the handset or press the

[Send]

button

to respond to the Callback. Wait for dial tone

and dial the telephone number or speed dial

number again.

- A callback will be cancelled if not answered within 30 seconds. If you have set a

callback, your [CBK] button’s LED, if programmed, will light.

NOTE

Cancelling Callback

A maximum of 5 callbacks can be set for extensions or external calls lines at the same time. To cancel a

callback, follow the procedure below.

1.

Press the

[CBK]

button or dial

[4] [4]

.

[CBK]

You will hear confirmation tone.

2.

Press the

[Hold]

button. This will cancel

the oldest callback that you have set.

Page 44 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Redial

To redial the last telephone number you dialled, press the [Send] button for approximately 2 seconds or dial

[1] [9].

Pressing the [Redial] key will give you the option to review up to 10 of your previously dialled external

numbers. You have to set ‘Redial Review’ as ‘On’ in the ‘MMC210’ to review these numbers.

1.

Press the

[Redial]

button.

2.

Use the direction buttons or

the

[

!

!!

!

Volume

"

"

""

]

button to select the

required number to redial and press

the Soft button corresponding to

[Dial]

.

3.

To review details about the previous call

prior to dialling it, press the Soft button

corresponding to

[NND]

.

4.

Press the

[Redial]

button twice to

automatically redial the last number

you dialled.

- If the hot keypad feature is turned off, you have to lift up the handset first or press

the [Speaker] button before you begin using the redial feature.

NOTE

- Redial does not apply to intercom calls.

© SAMSUNG Electronics Co., Ltd. Page 45

BASIC FEATURES

Save Number with Redial

To save the number you just dialled

for later use, press the

[SAVE]

button

before hanging up.

This saved number can be redialled at

any time by pressing the

[SNR]

button

or dialling

[1] [7]

. The same external trunk line

will be selected for you.

- The saved telephone number will be saved in memory until you save another number.

- Saved Number Redial does not apply to intercom calls.

NOTE

Page 46 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Automatic Redial / Retry

When you make an outside call and receive a busy signal, the OfficeServ system can automatically redial the

number for you. It will automatically redial at a pre-programmed interval for up to 99 attempts.

1.

When you hear a busy signal,

[RETRY]

press the

[RETRY]

button or press

the Soft button corresponding to

[RETRY]

on the LCD screen.

2.

The system will reserve the line

and automatically redial the same number

for you. You will hear the call progress

tones through the speaker. At this time,

the microphone is muted.

3.

When the called party answers,

you must pick up the handset or press

the

[Speaker]

or

[Send]

button before

you begin speaking.

You must answer within 10 seconds.

- If you make another call, auto-redial is cancelled.

- To cancel a retry, lift and replace the handset.

NOTE

© SAMSUNG Electronics Co., Ltd. Page 47

BASIC FEATURES

Call Park

You can park an outside call in one of 10 ‘parking orbits’.

1.

Press the

[PARK]

button.

[PARK]

Or, press the Soft button corresponding

to

[PARK]

on the LCD screen.

2.

Dial the orbit number required,

[0]-[9]

;

the

[PARK]

button

will flash.

Or, press a dedicated

[PARK]

button

;

the

[PARK ]

button will also flash.

To have the call ’parked’ picked up

by another station, notify the station user

of the parking orbit number.

3.

To pick up the parked call,

[PARK]

press the

[PARK]

button followed by

the required orbit number or press

the flashing

[PARK]

button.

Page 48 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

4. Intercom / Outside Calls

Holding a Call

You can temporarily suspend a conversation without ending the call by placing the call on hold.

Or, when another call is received, you can put your first call on hold and answer the new call.

You can simply press the button on hold again to resume the conversation.

The types of hold available are system hold(general hold), automatic hold, exclusive hold, and consultation

hold.

System Hold

1.

While you are engaged in a conversation,

press the

[Hold]

button.

2.

The call on hold will flash green on

your Digital phone and this line will flash red

on other stations.

3.

To return to the held call.

Press the line button.

The green LED will stop Flashing.

~

4.

Resume your conversation with the other party.

H

e

l

l

o

- While you are on a call, pressing a trunk line button or flashing Call button will

automatically put your first call on hold and connect you to the new call. Refer below.

NOTE

© SAMSUNG Electronics Co., Ltd. Page 49

BASIC FEATURES

Automatic Hold

With Automatic Hold set, when you are answering an outside call, pressing the trunk line or flashing Call

button will automatically put your outside call on hold and connect you to the next call. You can set Automatic

hold on your digital phone by following the procedure below.

1.

Press the

[Transfer]

button.

2.

Dial

[1] [1] [0]

.

3.

To use this function, dial

[0] [0] [1]

,

and if this function is not required,

dial [0] [0] [0].

4.

Press the

[Transfer]

button to save

the selected item.

- Intercom calls will be placed on hold by pressing the [Hold] or [Transfer] button.

If you press another trunk line button or flashing Call button while you are on an

NOTE

intercom call, the intercom will be disconnected.

Page 50 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Exclusive Hold

To place an outside call on hold exclusively so that other users cannot get it.

1.

Press the

[Hold]

button twice.

2.

The call will flash green on your Digital phone

and this line will show a steady red light

on other stations.

3.

To retrieve the call on hold, press

the flashing green line button or press

the

[Hold]

button.

- Intercom calls will always be placed on exclusive hold.

NOTE

© SAMSUNG Electronics Co., Ltd. Page 51

BASIC FEATURES

Consultation Hold

When you are talking to an external caller and it is necessary to consult with another extension.

1.

Press the

[Transfer]

button ; you will hear

transfer dial tone. Your outside call is placed

on Transfer hold.

2.

Dial the extension number.

3.

Consult with the internal party.

e

l

l

o

~

H

4.

Press the

[Transfer]

button to return

to the outside party or to hang up

to transfer the call.

- Repeatedly pressing the [Transfer] button will toggle between the outside party

and internal extension.

NOTE

Page 52 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Hold Recall

1.

If you leave a call on hold longer

than the system hold timer allows, it will recall

your station.

At this time, the call button on hold will have

a slow flashing amber light. If you do not

answer this recall within a pre-programmed

period of time, it may go to the system operator

depending upon your OfficeServ system programming.

2.

When your Digital phone rings, lift the handset

or press the

[Send]

button to answer the recall.

Retrieving Calls Held at Another Station

1.

When a line is on system hold, the line will

have a flashing red light. To retrieve the call

on hold, press the line button with the red

flashing light.

2.

When a line is on hold and it does not appear

on your Digital phone, dial

[1] [2]

plus the line

number or the extension number of the station

that placed the call on hold.

© SAMSUNG Electronics Co., Ltd. Page 53

BASIC FEATURES

Call Pickup

This section explains how to pickup a call that is ringing at another station.

Station Call Pickup

If a call rings on another station and you know the station number, you can answer the call on your digital

phone.

1.

A call is ringing on another station.

2.

Pick up the handset and listen for

the dial tone.

3.

Dial

[6] [5]

.

4.

Dial the station number that is ringing.

Page 54 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Group Call Pickup

Each station can be assigned to a call pickup group. Refer to your System Administrator for details on your

pick up group.

1.

When a call is ringing on another station

assigned to your pick up group.

2.

Pick up the handset and check for

dial tone.

3.

Dial

[6] [6]

.

4.

Or press the flashing

[GROUP PICKUP]

[GROUP PICKUP]

button, or press

[GROUP PICKUP]

button

followed by the related group number.

- A group number(extender) can be assigned to the [GROUP PICKUP] button.

- Station Call Pickup and Group Call Pickup may not enable you to answer the recalls

NOTE

at stations depending on the OfficeServ system programming. Refer to your Samsung

Authorised Reseller for further details.

© SAMSUNG Electronics Co., Ltd. Page 55

BASIC FEATURES

Dialling by Directory Name

Each extension number or speed dial number can have a relevant directory name.

You can select the extension number or speed dial number from the list of directory names by scrolling down

in alphabetical order. This online directory allows you to make any extension call or to find a speed dial

number within just a few seconds.

1.

Press the

[DIR]

button, or press

[DIR]

the Soft button related to

[DIR]

in

the CALL menu.

2.

Select the directory you wish to use,

PERS(

Personal, Speed Dial Number),

SYS(

System Speed Dial Number)

or

STN(

Station Name).

3.

Press the dial button that matches

the first letter of name that you wish to find.

4.

Find the required name by using

the

[

!

!!

!

Volume

"

""

"

]

button.

5.

Press the Soft button corresponding

to [

DIAL

] on the LCD screen to make

the call to the selected number.

- To directly move to one of the directories, an extender can be added to [DIR] button.

[1] for the Personal Speed Dial list, [2] for the System Speed Dial list and [3] for

NOTE

the Station list.

Page 56 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Transferring Calls

You can transfer your call to another extension or return to the outside party.

1.

While on a call, press the

[Transfer]

button.

Your call is automatically put on transfer hold.

2.

Dial an extension or group number.

Or, press the

[DSS]

button or station

group button. Your call will be

automatically put on transfer hold.

3.

For blind transfer, hang up

when you hear ringing. Or, wait for the called

party to answer and advise him/her of the call.

Then hang up.

Reconnection with the Outside Party

If the transfer is refused and

the called station hangs up, you will be

reconnected to the outside line. Or,

you can press the

[Transfer]

button to

return to the outside party.

© SAMSUNG Electronics Co., Ltd. Page 57

BASIC FEATURES

Call Retransferring

If you wish to send the call to another extension

without waiting for the first station to hang up,

simply press another

[DSS]

button.

Or, press the CALL

button or trunk line button to

return to the outside party and begin the transfer

process again.

- When you are transferring a call to a station programmed for Voice Announce

or Auto Answer, the transferred call will always ring.

NOTE

- After the internal party answers, you may alternate back and forth between the parties

by pressing the [Transfer] button.

- You cannot transfer an Intercom call by pressing the [DSS] button for the station required.

You must press the [Transfer] button first and then press the [DSS] button or dial the

destination extension number.

Transfer With Camp-On

When you are transferring a call to

another station and you receive a busy signal,

you may camp the call on to this station.

So, when this station becomes free,

it can be connected to the transferred call.

Simply hang up when you hear a busy signal.

Then, the called party will be alerted by

a call waiting tone.

Page 58 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Transfer To Voice Mail

This feature is used to send a call directly to a voice mailbox. Your Digital phone must have a correctly

programmed [VT] button to accomplish this.

1.

Press the

[VT]

button while you are on a call.

[VT]

Or, press the Soft button corresponding

to

[VT]

on the LCD screen.

2.

Dial the mailbox number.

3.

Hang up when dialling is completed.

© SAMSUNG Electronics Co., Ltd. Page 59

BASIC FEATURES

Call Waiting

If an outside call or another station has camped-on to you, your Digital phone will ring and the waiting call’s

LED will flash green.

1.

Press the flashing button to answer

the waiting call.

If your Digital phonee has the Automatic Hold

feature set, your current call will go

on hold automatically.

2.

If Automatic Hold is not set,

press the

[Hold]

button and then press

the button with the flashing LED.

Or, finish the first call and hang up;

the waiting call will ring your Digital phone.

3.

Lift the handset or press the

[Send]

button to answer.

Page 60 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Speed-Dial

You may assign any frequently used numbers to a personal speed dial number list for your station. These

personal speed dial numbers are in addition to the system Speed dial numbers available. Speed dial numbers

can be allocated to buttons which allow you to press the one touch speed dial button to call the number.

Explanation of Special Feature Buttons

When programming speed dial numbers, the special feature buttons are used and they are

designated as A, B, C, D, E, and F buttons. Each special feature button is explained in the

following table.

A, B, C, D, E, and F buttons of the DS-5021D/5014D digital phone are the first 6 buttons in

the last row of the programmable buttons located below the LCD screen.

For example, the DS-5021D digital phone is shown below.

ABCDEF

Button Features

A Button Not used.

B Button To insert a FLASH(time loop break).

C Button To insert a PAUSE.

D Button To convert from the pulse dialling(mechanical method) to the tone

dialling(Electronic method).

E Button Used to hide the numbers from showing up on the LCD screen.

F Button Used to input a speed dial name.

Hold Button To clear a speed dial number.

© SAMSUNG Electronics Co., Ltd. Page 61

BASIC FEATURES

Programming the Speed Dial Numbers

Your station can be assigned up to fifty numbers, 00~49. Ask your System Administrator for the number of

speed dial numbers that have been assigned to your station.

!

To program the personal dial numbers,

1.

Press the

[Transfer]

button and dial

[1] [0] [5]

,

without lifting the handset.

2.

Select a free speed dial number

location(00-49).

3.

Dial either a specific trunk line number or the

trunk access code.

4.

Dial the telephone number to be saved

(maximum of 24 digits), including the #,

*, FLASH, PAUSE, etc.

Press the special key [F] to enter a name

for the Speed dial number then press

the special key [F] to return to the speed dial

entry menu again.

5.

Press the

[Transfer]

button to save

the number. Or press the right Soft button

and repeat steps 2 to 5.

Page 62 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Dialling Speed Dial Numbers

You can dial a speed dial number stored in the list of system speed dial numbers between 500-999 or the list

of your personal number between 00-49 using the following procedure.

1.

Press the

[Memory] button

or dial

[1] [6]

,

[Memory]

without lifting the handset.

2.

Dial the speed dial location number

that is programmed with the telephone number

you wish to call.

3.

The telephone number is automatically

dialled for you.

!

Alternatively, to dial one of your first 10 personal speed dial numbers.

1.

Without lifting the handset,

press a dial button 0-9 for approximately

2 Seconds.

2.

The telephone number programmed in

the corresponding personal speed dial

location(00-09) will be dialled automatically.

© SAMSUNG Electronics Co., Ltd. Page 63

BASIC FEATURES

Assigning a Name to the Speed Dial Button.

A name of 11 characters can be assigned for each speed dial button.

This name is used to dial the telephone number using the directory feature.

1.

Press the

[Transfer]

button.

2.

Dial

[1] [0] [6]

.

3.

Press the speed dial number location to

be assigned with a name(00-49).

4.

Enter a name. Refer to

the ‘

Things You Should Know

’ in

this manual for how to enter a letter.

5.

Press the

[Transfer]

button to save

the speed dial name or the right Soft button

to .enter further names by repeating

steps 3 to 5.

Page 64 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

Programming One-touch Speed Dial Buttons

You can assign a frequently used number from the speed dial numbers to one of the programmable keys on

the Digital phone for one touch speed dial use.

1.

Without lifting up the handset,

press the

[Transfer]

button.

2.

Dial

[1] [0] [7]

.

3.

Locate a vacant

[SPD]

button using

the

[Volume

""

"

"

]

button and press

the right Soft button.

4.

Dial the speed dial number

location(00-49 or 500-999) to be

assigned for this button.

5.

Press the

[Transfer]

button to save

the selected number.

6.

If the one touch speed dial button is pressed,

a call is made to this saved speed dial number

automatically.

© SAMSUNG Electronics Co., Ltd. Page 65

BASIC FEATURES

Using Chain Dialling

After a speed dial number is pressed,

[Memory]

additional numbers can be dialled manually

or you can chain together speed dial numbers.

After the first speed dial number,

press the

[Memory]

button or dial

[1] [6]

and

then dial other speed dial number location.

Or after the speed dial number is pressed, dial the additional numbers manually.

Conference Calls

You can make a conference call of up to 5 parties including yourself. The OfficeServ system also allows each

station to pre assign up to 5 conference groups so you can set up a conference call by pressing a single

[Group Conference] programmable button. Refer to your System Administrator to confirm that this option is

available to you.

1. Press the

[Conference]

button while

engaged in a conversation.

You will hear conference tone.

2. Make another call, either intercom

or outside. Press the

[Conference]

button

and you will hear conference Tone.

3.

Make another call to add additional parties

or press the

[Conference]

button to join

all parties into the conference.

Then, Repeat the last step, until all other

parties required are connected.

Page 66 © SAMSUNG Electronics Co., Ltd.

BASIC FEATURES

4.

To drop a person from your conference call,

press the

[Conference]

button

and dial

the extension or trunk number that is to

be dropped.

Press the

[Conference]

button

again to re-establish the conference.

- When attempting to add another person to the conference and you are not able to reach

the desired person, simply press the [Conference] button again.

NOTE

Programming Conference Groups.

1.

Press the

[Transfer]

button.

2.

Dial

[1] [1] [8]

.

© SAMSUNG Electronics Co., Ltd. Page 67

BASIC FEATURES

3.

Select the required Conference Group

number by using the

[

!

!!

!

Volume

"

""

"

]

button

and press the right Soft button.

4.

Select ‘Name’ and press the right Soft button

to enter the Conference Group name.

Refer to the ‘

Things You Should Know

’ in

this guide for entering characters.

Press the right Soft button to save the name.

5.

Using the

[

!

!

!!

Volume

"

""

"

]

button to select

[MBR1~4]

and press the right Soft button.

6.

Dial the extension number or

outside telephone number remembering to

dial the trunk access code first and press

the right Soft button. Repeat steps 6 and 7 to

add conference group members.

7.

Save the settings by pressing

the

[Transfer]

button.

To make a group conference call press

the

[GCONF]

button followed by

the group number and the conference will

be setup automatically. If an extender

has been added to the

[GCONF]

button(1~5)

just press the

[GCONF]

programmable button.

Page 68 © SAMSUNG Electronics Co., Ltd.