Pioneer DJM-700-S: CONFIRM FEATURES ACCESSORIES

01_DJM-700_En.book 4 ページ ２００７年７月１０日　火曜日　午後８時４１分

CONFIRM

FEATURES

ACCESSORIES

Designed for high sound quality

Analog signals are transmitted by the shortest circuitry and

Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1

converted to digital format at 96 kHz sampling rate via a 24-bit high

quality A/D converter. As a result, signals are passed to the digital

mixing stage in the best possible state. Mixing is performed with a

32-bit DSP, totally eliminating any loss in fidelity, while the ideal

level of filtering is introduced to produce optimum sound for DJ

play.

These features are housed in a high-rigidity chassis with high-

output power section and other features that carry on the high-

CAUTIONS REGARDING

fidelity performance of the DJM-1000, thus ensuring the utmost in

clear and powerful club sound.

HANDLING

Manual Filter

This unit features Manual Effecter for more intuitive setting of

Location

effects, thus expanding the potential range of DJ play. In addition,

by combining this with “beat effects,” an even wider range of

Install the unit in a well-ventilated location where it will

effects can be produced, allowing a tremendous variety of remix

and DJ play.

not be exposed to high temperatures or humidity.

• Do not install the unit in a location which is exposed to direct

Beat effects

rays of the sun, or near stoves or radiators. Excessive heat

The “beat effects” so popular on the DJM-600 are continued here.

can adversely affect the cabinet and internal components.

Effects can be applied in linkage to the BPM (Beats Per Minute)

Installation of the unit in a damp or dusty environment may

count, thus allowing the production of a variety of sounds.

also result in a malfunction or accident. (Avoid installation

Equipped with a broad range of special effects, including delay,

near cookers etc., where the unit may be exposed to oily

echo, trans, filter, flanger, phaser, reverb, robot, crush, roll, reverse

smoke, steam or heat.)

roll, uproll, and downroll.

• When the unit is used inside a carrying case or DJ booth,

This unit features an “effect frequency filter” allowing the user to

separate it from the walls or other equipment to improve

limit what frequency bands are subjected to effects, and which are

heat radiation.

not. This enhances the degree of audio expression compared to

conventional effecters that are applied to the entire frequency

range.

Cleaning the Unit

• Use a polishing cloth to wipe off dust and dirt.

Digital OUT

• When the surfaces are very dirty, wipe with a soft cloth

The digital output connectors support sampling rates 96 kHz/24-

dipped in some neutral cleanser diluted five or six times with

bit format and 48 kHz/24-bit format, making the unit even more

water and wrung out well, then wipe again with a dry cloth.

convenient for cutting studio tracks or on other occasions when

Do not use furniture wax or cleaners.

high sound fidelity is required. (Only linear PCM is supported.)

• Never use thinners, benzene, insecticide sprays or other

chemicals on or near this unit, since these will corrode the

MIDI OUT

surfaces.

Virtually all the dial and switch information of the DJM-700-S/

DJM-700-K can be output in MIDI signal format, allowing a

component supporting MIDI control to be controlled via MIDI.

Other functions

•A control cable can be used to connect the unit to a Pioneer DJ

CD player, thus allowing playback to be linked to operation of the

fader (“fader start play”).

• Built-in “3-band equalizer” supports level control within the

range of +6 dB to –26 dB in each bandwidth.

• “Cross fader assignment” function allows each channel’s input

to be assigned flexibly to a cross fader.

• “Talk over” function automatically lowers track volume during

microphone input.

• “Fader curve adjustment” function allows modification of the

cross fader and channel fader curves.

4

En