Philips 190SW9FS: Поиск и устранение неисправностей

● Убедитесь в том, что кабель монитора

На экране отображается сообщение

правильно подсоединен к компьютеру.

(См. также краткое руководство по

настройке.)

● Проверьте кабель монитора на

отсутствие перегибов.

● Убедитесь в том, что компьютер

включен.

●

Функция Auto предназначена для

использования в стандартном

Macintosh- или IBM-совместимом ПК, в

котором применяется

соответствующая версия

Кнопка AUTO не работает должным

операционной системы Microsoft

образом

Windows.

●

Эта функция может не работать при

использовании нестандартных ПК или

видеокарты.

Проблемы при формировании изображения

●

Нажмите кнопку Auto.

●

Отрегулируйте положение

Неправильное положение

изображения, используя параметр

изображения на экране дисплея

Phase/Clock (Фаза/Частота) в разделе

More Settings (Дополнительные

параметры) экранного меню Основные

параметры.

● Убедитесь в том, что сигнальный

кабель правильно подсоединен к

Дрожание изображения на экране

графической плате или ПК.

Мерцание изображения по вертикали

● Нажмите кнопку Auto.

●

Устраните вертикальные полосы,

используя параметр More Settings

(Дополнительные настройки) в

разделе Phase/Clock (Фаза/

Синхронизация) экранного меню Main

Controls (Основные параметры).

Мерцание изображения по

горизонтали

● Нажмите кнопку Auto.

●

Устраните вертикальные полосы,

используя параметр More Settings

(Дополнительные настройки) в

разделе Phase/Clock (Фаза/

Синхронизация) экранного меню Main

Controls (Основные параметры).

● Настройте контрастность и яркость

экранного меню. (Подсветка ЖК-

монитора имеет фиксированный срок

Слишком яркий или слишком темный

службы. Если экран темнеет или

экран

начинает мерцать, свяжитесь с

местным торговым представителем.

● Если изображение остается на экране

в течение продолжительного времени,

оно может привести к формированию

отпечатка на экране и образованию

Появляется остаточное изображение

остаточного изображения. Остаточное

изображение обычно исчезает спустя

несколько часов.

● Это характерно для жидких кристаллов

и не обусловлено сбоями или

ухудшением характеристик жидких

Остаточное изображение остается

кристаллов. Спустя определенное

после выключения питания

время остаточное изображение

обычно исчезает.

● Остаточные точки - это нормальное

На экране остаются зеленые,

явление для жидких кристаллов,

красные, синие, темные и белые

изготавливаемых по имеющейся на

точки

сегодняшний день технологии.

● Отрегулируйте синий индикатор,

используя индикатор питания в

Отрегулируйте синий индикатор

Установках в Основных средствах

питания

управления меню.

Дополнительную поддержку можно получить в Центрах информации для потребителей и

связавшись с представительствами сервисной службы компании Philips.

ВОЗВРАТ К НАЧАЛУ СТРАНИЦЫ

www.tcodevelopment.com

RETURN TO TOP OF THE PAGE

Recycling Information for Customers

Philips establishes technically and economically viable objectives to optimize the environmental performance of

the organization's product, service and activities.

From the planning, design and production stages, Philips emphasizes the important of making products that

can easily be recycled. At Philips, end-of-life management primarily entails participation in national take-back

initiatives and recycling programs whenever possible, preferably in cooperation with competitors.

There is currently a system of recycling up and running in the European countries, such as The Netherlands,

Belgium, Norway, Sweden and Denmark.

In U.S.A., Philips Consumer Electronics North America has contributed funds for the Electronic Industries

Alliance (EIA) Electronics Recycling Project and state recycling initiatives for end-of-life electronics products

from household sources. In addition, the Northeast Recycling Council (NERC) - a multi-state non-profit

organization focused on promoting recycling market development - plans to implement a recycling program.

In Asia Pacific, Taiwan, the products can be taken back by Environment Protection Administration (EPA) to

follow the IT product recycling management process, detail can be found in web site www.epa.gov.tw

The monitor contains parts that could cause damage to the nature environment. Therefore, it is vital that the monitor is

recycled at the end of its life cycle.

For help and service, please contact Consumers Information Center or F1rst Choice Contact Information

Center in each country or the following team of Environmental specialist can help.

Mrs. Argent Chan, Environment Manager

Philips Consumer Lifestyle

E-mail: argent.chan@philips.com

Tel: +886 (0) 3 222 6795

Mr. Maarten ten Houten - Senior Environmental Consultant

Philips Consumer Electronics

E-mail: marten.ten.houten@philips.com

Tel: +31 (0) 40 27 33402

Mr. Delmer F. Teglas

Philips Consumer Electronics North America

E-mail: butch.teglas@philips.com

Tel: +1 865 521 4322

RETURN TO TOP OF THE PAGE

Waste Electrical and Electronic Equipment-WEEE

Attention users in European Union private households

This marking on the product or on its packaging illustrates that, under European Directive

2002/96/EG governing used electrical and electronic appliances, this product may not be disposed of with

normal household waste. You are responsible for disposal of this equipment through a designated waste

electrical and electronic equipment collection. To determine the locations for dropping off such waste electrical

and electronic, contact your local government office, the waste disposal organization that serves your

household or the store at which you purchased the product.

RETURN TO TOP OF THE PAGE

CE Declaration of Conformity

Philips Consumer Electronics declare under our responsibility that the product is in conformity with the following

standards

- EN60950-1:2001 (Safety requirement of Information Technology Equipment)

- EN55022:1998 (Radio Disturbance requirement of Information Technology Equipment)

- EN55024:1998 (Immunity requirement of Information Technology Equipment)

- EN61000-3-2:2000 (Limits for Harmonic Current Emission)

- EN61000-3-3:1995 (Limitation of Voltage Fluctuation and Flicker)

following provisions of directives applicable

- 73/23/EEC (Low Voltage Directive)

- 89/336/EEC (EMC Directive)

- 93/68/EEC (Amendment of EMC and Low Voltage Directive)

and is produced by a manufacturing organization on ISO9000 level.

The product also comply with the following standards

- ISO9241-3, ISO9241-7, ISO9241-8 (Ergonomic requirement for CRT Monitor)

- ISO13406-2 (Ergonomic requirement for Flat Panel Display)

- GS EK1-2000 (GS specification)

- prEN50279:1998 (Low Frequency Electric and Magnetic fields for Visual Display)

- MPR-II (MPR:1990:8/1990:10 Low Frequency Electric and Magnetic fields)

- TCO'99, TCO'03 (Requirement for Environment Labelling of Ergonomics, Energy, Ecology and Emission,

TCO: Swedish Confederation of Professional Employees) for TCO versions

RETURN TO TOP OF THE PAGE

Energy Star Declaration

This monitor is equipped with a function for saving energy which supports the VESA Display

Power Management Signaling (DPMS)

standard. This means that the monitor must be

connected to a computer which supports VESA DPMS. Time settings are adjusted from the

system unit by software.

VESA State LED Indicator Power Consumption

Normal operation ON (Active) Blue < 36W (typ.)

Power Saving

Alternative 2

Sleep Blue (blinking) < 0.8 W (typ.)

One step

Switch Off Off < 0.8 W (typ.)

As an ENERGY STAR

®

Partner, PHILIPS has determined that this product meets

the

ENERGY STAR

®

guidelines for energy efficiency.

We recommend you switch off the monitor when it is not in use for a long time.

RETURN TO TOP OF THE PAGE

Federal Communications Commission (FCC) Notice (U.S. Only)

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the user

is encouraged to try to correct the interference by one or more of the following measures:

● Reorient or relocate the receiving antenna.

● Increase the separation between the equipment and receiver.

● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

● Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance

could void the user's authority to operate the equipment.

Use only RF shielded cable that was supplied with the monitor when connecting this monitor to a computer

device.

To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or excessive

moisture.

THIS CLASS B DIGITAL APPARATUS MEETS ALL REQUIREMENTS OF THE CANADIAN INTERFERENCE-

CAUSING EQUIPMENT REGULATIONS.

RETURN TO TOP OF THE PAGE

FCC Declaration of Conformity

Trade Name: Philips

Philips Consumer Electronics North America

P.O. Box 671539

Responsible Party:

Marietta , GA 30006-0026

1-888-PHILIPS (744-5477)

Declaration of Conformity for Products Marked with FCC Logo,

United States Only

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not

cause harmful interference, and (2) this device must accept any interference received, including interference that may cause

undesired operation.

RETURN TO TOP OF THE PAGE

Commission Federale de la Communication (FCC Declaration)

Cet équipement a été testé et déclaré conforme auxlimites des appareils numériques de

class B,aux termes de l'article 15 Des règles de la FCC. Ces limites sont conçues de façon

à fourir une protection raisonnable contre les interférences nuisibles dans le cadre d'une

installation résidentielle. CET appareil produit, utilise et peut émettre des hyperfréquences

qui, si l'appareil n'est pas installé et utilisé selon les consignes données, peuvent causer

des interférences nuisibles aux communications radio. Cependant, rien ne peut garantir

l'absence d'interférences dans le cadre d'une installation particulière. Si cet appareil est la

cause d'interférences nuisibles pour la réception des signaux de radio ou de télévision, ce

qui peut être décelé en fermant l'équipement, puis en le remettant en fonction, l'utilisateur

pourrait essayer de corriger la situation en prenant les mesures suivantes:

● Réorienter ou déplacer l'antenne de réception.

● Augmenter la distance entre l'équipement et le récepteur.

● Brancher l'équipement sur un autre circuit que celui utilisé par le récepteur.

● Demander l'aide du marchand ou d'un technicien chevronné en radio/télévision.

Toutes modifications n'ayant pas reçu l'approbation des services compétents en matière de

conformité est susceptible d'interdire à l'utilisateur l'usage du présent équipement.

N'utiliser que des câbles RF armés pour les connections avec des ordinateurs ou périphériques.

CET APPAREIL NUMERIQUE DE LA CLASSE B RESPECTE TOUTES LES EXIGENCES DU REGLEMENT

SUR LE MATERIEL BROUILLEUR DU CANADA.

RETURN TO TOP OF THE PAGE

EN 55022 Compliance (Czech Republic Only)

RETURN TO TOP OF THE PAGE

MIC Notice (South Korea Only)

Class B Device

Please note that this device has been approved for non-business purposes and may be used in any

environment, including residential areas.

RETURN TO TOP OF THE PAGE

Polish Center for Testing and Certification Notice

The equipment should draw power from a socket with an attached protection circuit (a three-prong socket). All

equipment that works together (computer, monitor, printer, and so on) should have the same power supply

source.

The phasing conductor of the room's electrical installation should have a reserve short-circuit protection device

in the form of a fuse with a nominal value no larger than 16 amperes (A).

To completely switch off the equipment, the power supply cable must be removed from the power supply

socket, which should be located near the equipment and easily accessible.

A protection mark "B" confirms that the equipment is in compliance with the protection usage requirements of

standards PN-93/T-42107 and PN-89/E-06251.

RETURN TO TOP OF THE PAGE

North Europe (Nordic Countries) Information

Placering/Ventilation

VARNING:

FÖRSÄKRA DIG OM ATT HUVUDBRYTARE OCH UTTAG ÄR LÄTÅTKOMLIGA, NÄR

DU STÄLLER DIN UTRUSTNING PÅPLATS.

Placering/Ventilation

ADVARSEL:

SØRG VED PLACERINGEN FOR, AT NETLEDNINGENS STIK OG STIKKONTAKT

ER NEMT TILGÆNGELIGE.

Paikka/Ilmankierto

VAROITUS:

SIJOITA LAITE SITEN, ETTÄ VERKKOJOHTO VOIDAAN TARVITTAESSA HELPOSTI

IRROTTAA PISTORASIASTA.