Karcher Balayeuse KM 85-50 W Bat Pack Classic: Start up

- 

5



Place the second battery into the bat-

tery holder.



Connect pole terminal (red cable) to the 

positive pole (+) of the battery (2).



Fit the connection wires to the batteries. 



Connect pole terminal to the negative 

pole (-) of the battery (1).

Note:

 Check that the battery pole and pole 

terminals are adequately protected with 

pole grease.

Caution

Charge the batteries before commissioning 

the machine. 



Danger

Risk of injury! Comply with safety regula-

tions on the handling of batteries. Observe 

the directions provided by the manufacturer 

of the charger.



Turn off the appliance. 



KM 85/50 W Bp Adv



Pull out the covering flap from the bat-

tery charging bush. 



Connect the charger plug. 



Plug in mains connector and switch on 

charger, if necessary.



KM 85/50 W Bp Pack Adv



Open the device hood.



Secure the appliance hood to the hood 

support to prevent it from closing.



Insert the plug of the integrated charger 

into the socket.

Battery charge status indicator



KM 85/50 W Bp



KM 85/50 W Bp Pack



Open the device hood.



Secure the appliance hood to the hood 

support to prevent it from closing.



Connect the charger plug. 



Plug in mains connector and switch on 

charger, if necessary.



Open the device hood.



Secure the appliance hood to the hood 

support to prevent it from closing.



Disconnect pole terminal on the nega-

tive pole (-) from the battery (1).



Unscrew the connection wires from the 

batteries.



Disconnect pole terminal on the posi-

tive pole (-) from the battery (2).



Remove the second battery from the 

battery holder.



Release the bowden cable (see "Instal-

lation the batteries").



Loosen the fastening belt of the first 

battery.



Remove the first battery from the motor 

support.



Dispose of the used batteries according 

to the local provisions.



Park the sweeper on an even surface.



Switch off engine.



Lock parking brake.



(only Adv model)

Turn the push handle lock clockwise; 

lock is locked.



Check charging status of battery.



Check side brush.



Check roller brush.



Shake off dust filter.



Empty waste container.

Note:

 For description, see section on Care 

and maintenance.

Charge the batteries

Batteries are being 

charged

Indicator lamp 

glows yellow

Batteries are charged Indicator lamp 

glows green

Fault

Indicator lamp 

glows yellow

Removing the batteries

Start up

General notes

Inspection and maintenance work

19 EN