Karcher Balayeuse KM 85-50 W Bat Pack Classic: Before Startup

     - 

4

Note:

 The hood is unlocked with the same 

key as the main switch. The key can only 

be removed if the hood is locked.



Insert the main switch key in the hood 

lock and turn it by 180°. 



Open the device hood.



Secure the appliance hood to the hood 

support to prevent it from closing.



Remove hood support.



Close cover.



Close the device hood with the main 

switch key. 



Danger

Risk of injury and damage! Do not use a 

forklift to unload the appliance.

To unload the machine, proceed as follows:



Cut plastic packing belt and remove foil.



Remove the wooden blocks that secure 

the wheels and raise the device from 

the pallette by hand. 



KM 85/50 W Bp Adv

KM 85/50 W Bp Pack Adv

Turn the push handle lock counter-

clockwise; lock is unlocked.



Remove the waste container.



Push appliance to the back onto the 

push handle.



Clip side brush on to driver and screw 

on.



Tilt the appliance forward.

Please observe the following warning notes 

when handling batteries:



Danger

Risk of explosion! Do not put tools or similar 

on the battery, i.e. on the terminal poles 

and cell connectors.



Danger

Risk of injury! Ensure that wounds never 

come into contact with lead. Always clean 

your hands after having worked with batter-

ies.



Danger

Risk of fire and explosion!

–

Smoking and naked flames are strictly 

prohibited. 

–

Rooms where batteries are charged 

must have good ventilation because 

highly explosive gas is emitted during 

charging. 



Danger

Danger of causticization!

–

Rinse thoroughly with lots of clear water 

if acid gets into the eye or comes in con-

tact with the skin.

–

Then consult a doctor immediately.

–

Wash off the acid If it comes in contact 

with the clothes.



KM 85/50 W Bp



KM 85/50 W Bp Adv

Note:

 Recommended battery and charger, 

see Accessories.



Open the device hood.



Secure the appliance hood to the hood 

support to prevent it from closing.

Caution

Risk of damage. Remove battery bowden 

cable from the holding plate.

1 Rating nut

2 Nut

3 Disc

4 Halting plate

5 Disc

6 Counter-nut

7 Fork head

8 Lever

Loosen the bowden cable:



Pull out the pin from the fork head and 

lever.



Loosen counter-nut.



Take off the rating nut from the halting 

plate.



Set the battery to motor carrier. 



Secure the battery with the holder tape. 

Replace Bowden cable:



Remount the rating nut from the halting 

plate.



Tighten counter nut.



Position the fork head on the lever and 

slide and secure the pin through the 

fork head and the lever.

Open the device hood.

Close device hood

Before Startup

Unloading

Install side brush

Batteries

Safety notes regarding the batteries

Observe the directions on the 

battery, in the instructions for 

use and in the vehicle operat-

ing instructions!

Wear an eye shield!

Keep away children from acid 

and batteries!

Risk of explosion!

Fire, sparks, open light, and 

smoking not allowed!

Danger of causticization!

First aid!

Warning note!

Disposal!

Do not throw the battery in the 

dustbin!

Install batteries

18 EN