Pioneer KRP-SW01: Preventing Equipment from Falling Over

Preventing Equipment from Falling Over

Using a wall for stabilization

1

Attaching falling prevention bolts to the

Pioneer display and television.

2

 Usingstrongcordstostabilizeitappropriately

andfirmlytoawall,pillar,orothersturdy

element.

 • Performthisworkinthesamewayontheleftand

right sides.

 • Thelengthofthecordsusedmustbelongenoughto

allow the stand to rotate freely.

• Donotusebaremetalwireforthecords.Thewireendsmay

cause electric shock and fire if they get inside the Pioneer

display and television through the

ventilation holes.

• Usefallingpreventionbolts,ropes

and fittings that are available on

the market.

Recommended bolts:

Nominal diameter M8

Length 12 mm to 15 mm (1/2 to 5/8 inch)

Stabilizing on TV table or other location

Fix the Pioneer display and television to a TV table using the

fall-prevention straps as in the diagram.

Fix the racks etc. using screws for sale on the market.

• ThePioneerdisplayandtelevisionbeingquiteheavy,aTV

tablethatissturdyenoughtosupportit,andwithsufficient

width and depth to ensure that it does not fall over should

always be used.

• TostabilizethePioneerdisplay

andtelevisiononaTVtable,

use screws that have a nominal

diameter of 6 mm (1/4 inch).

Select the appropriate screws

after consulting a professional

installer if necessary.

After installing the stand, be sure to take special care to ensure that the Pioneer display and

television will not fall over.

• BecauseofthePioneerdisplaysandtelevisionsweight,ifitcouldfalldown,thiscanresultininjury.

• Forsafety,besuretotakespecialcaretoensurethatthePioneerdisplayandtelevisionwillnotfallover.