Pioneer KRP-SW01: Forward/Backward Angle of Inclination Adjustment Mechanism

Forward/Backward Angle of Inclination Adjustment Mechanism

On this stand, you can adjust the angle of inclination of the

Pioneer display and television within a range of approximately

2° forward or backward according to your preference.

•Besuretoadjusttheangleonlyafteryouhave

attached the Pioneer display and television.

•Besuretoinstallitonaflattableorotherflat

surface.

•BesuretoholdthetopofthePioneerdisplay

and television with your hand while adjusting

the angle.

Adjustment Procedure

1

Loosen the forward/backward inclination

anchor bolts using the enclosed hexagonal

wrench (2 locations on the left and right).

While being sure to hold the top of the Pioneer display

and television with your hand, loosen the

forward/

backward inclination anchor bolts

on the left and

right sides by rotating them counterclockwise using the

enclosed hexagonal wrench.

2

Set the angle you prefer.

 SettheangleyoupreferbyslowlymovingthePioneer

display and television.

3

Tighten the forward/backward inclination

anchor bolts (2 locations on the left and right).

Firmly tighten the

forward/backward inclination

anchor bolts

on the left and right sides by rotating them

clockwise using the enclosed hexagonal wrench.

Be sure to hold the top of the Pioneer display and

television with your hand until you have fully tightened

the bolts.

Whileadjustingtheangle,beverycarefultokeepyour

hands out of the place indicated by the arrow on the

figure.

4

Check once more to make sure that the

forward/backward inclination anchor bolts are

fully tightened.