Pioneer KRP-SW01: Installing the Product on a TV table etc.

Installing the Product on a TV table etc.

Be sure to observe the following precautions when moving

or installing this product with a Pioneer display and television

into a TV table or other enclosure.

Precautions when moving

English

15

En

Installation precautions

Make sure that you always secure a space at least as large

as that shown in the following diagram in front of and behind

the table top stand.

• Whenmovingtheproductmorethanafew

meters,firstremovethespeaker,thenremove

the Pioneer display and television from the stand

andmovethespeaker,

stand,Pioneerdisplayand

television separately.

 • WhendetachingthePioneerdisplayandtelevision

fromthestand,besuretofollowtheprocedure

described in “Detaching the Pioneer Display and

Television from the Stand” on page 17.

Precautions when installing in a TV

table or other enclosure

Wheninstallingin

a TV table or other

enclosure,holdthe

Pioneer display and television

by the handles located on the

rear of the Pioneer display

and television. If you hold

thespeakers,theymaybe

damaged or twisted.

 • Ifthestand

protrudes from the

TVtable,itcould

cause unforeseen

accidents such as

the equipment breaking or

falling over.

 • Whenrotating,takecarenottoallowthe

display to bump into walls or surrounding

objects.



Range of angle rotation

Preparing the Cables

Use the enclosed cable binder to bind the cables.

Be very careful not to apply force to the bases of the cables on

the Pioneer display and television side.

Using the cable binder

1

Insert the cable binder through the hole on the

top of the rotating platform of the stand.

2

Gathering the cables and routing them through

the cable binder.