Karcher Aspiro-brosseur CV 85-2 RS: Faults

- 

7

1 Screw

2 Front panel

Î

Loosen screws.

Î

Remove front panel.

1 Screw

2 Cover

3 Drive chain

Î

Loosen screws.

Î

Remove the lid.

Î

Check the chain drive and pinion for 

wear.



Danger

Risk of injury! Before carrying out any tasks 

on the machine, set the main key to "0" and 

remove it.  Pull out the battery plug.

In case of faults that cannot be remedied 

using the table below please contact the 

customer service. 

Checking the drive chain

Faults

Fault

Remedy

By whom

Appliance cannot be started

Insert the battery plug on the device.

Operator

Release emergency-stop button by turning.

Operator

Battery capacity exhausted; recharge battery.

Operator

Check battery cable for correct sitting.

Operator

Check battery cable for corrosion; clean, if required.

Operator

Device does not drive or drives 

only slowly

Press the unlocking key.

Operator

Reset fuse of traction drive

Operator

Deactivate immobilising brake; press the unlocking lever upward to activate it. 

Operator

Release accelerator pedal, turn the key switch to "0", turn the key switch to "1", press 

the safety pedal, press unlocking key, press accelerator pedal.

Operator

Control is overheated

Switch off device and let it cool down. 

Operator

Battery capacity exhausted; recharge battery.

Operator

Device does not brake

Deactivate immobilising brake; press the unlocking lever upward to activate it. 

Operator

Brushes in brush/ vacuum 

head are not working

Reset fuse of brush roller drive.

Operator

Check the brushes for blockage due to foreign particles, remove them if found.

Operator

Side-brush is not working

Reset fuse of side-brush drive.

Operator

Brushes are rotating slowly

Battery capacity exhausted; recharge battery.

Operator

Suction turbine is not working Reset fuse of suction turbine.

Operator

Battery capacity exhausted; recharge battery.

Operator

Filter bag is full; the indicator 'filter bag full' glows.  Replace filter bag. 

Operator

Poor dust suction

Suction hose/ suction channel blocked; clean suction hose/ suction channel. 

Operator

Battery capacity exhausted; recharge battery.

Operator

Filter bag full; replace filter bag. 

Operator

Accessories

Description

Part no.: 

Filter bag, 10 pieces

8.600-121.0

Battery replacement kit consists of: battery trough, cable set, locking set, 2 transport cars

8.601-121.0

Battery, 12V/105 A, maintenance-free (gel), 3 pieces required

6.654-141.0

Charger, 36V, for maintenance-free batteries

6.654-229.0

17 EN