Pioneer MVH-180UB: Radio

7En

The options vary depending on the unit.

Menu Item Description

1 Press SRC/OFF to select [RADIO].

FM STEP Select the FM tuning step from 100 kHz or 50 kHz.

2 Press BAND/ to select the band from [FM1], [FM2], [FM3], [MW] or

[100], [50]

[LW].

SP-P/O MODE Select when there is a full-range speaker connected to

the rear speaker output leads and there is a subwoofer

3 Press a number button (1/ to 6/).

[REAR/SUB.W]

connected to the RCA output.

[SUB.W/SUB.W] Select when there is a passive subwoofer connected

directly to the rear speaker output leads and there is a

subwoofer connected to the RCA output.

[REAR/REAR] Select when there are full-range speakers connected to

the rear speaker output leads and RCA output. If there is

a full-range speaker connected to the rear speaker

output leads, and the RCA output is not used, you may

select either [REAR/SUB.W] or [REAR/REAR].

S/W UPDATE Select to update the unit to the latest Bluetooth

software. For details on Bluetooth software and

updating, visit our website.

SYSTEM RESET Select [YES] to initialize the unit settings. The unit will be

restarted automatically.

[YES], [CANCEL]

(Some of the settings will be retained even after

resetting the unit, such as Bluetooth pairing information,

etc.)

Radio

The tuner frequencies on this unit are allocated for use in Western Europe,

Asia, the Middle East, Africa and Oceania. Use in other areas may result in poor

reception. The RDS (radio data system) function only works in areas that

broadcast RDS signals for FM stations.

The / buttons can be also used to select a preset station when [SEEK] is set to

[PCH] in the FUNCTION settings (page 16).

The six strongest stations are stored on the number buttons (1/ to 6/).

1 After selecting the band, press the M.C. dial to display the main menu.

2 Turn the M.C. dial to select [FUNCTION], then press to confirm.

3 Turn the M.C. dial to select [BSM], then press to confirm.

To seek a station manually

1

After selecting the band, press / to select a station.

Press and hold / then release to seek an available station.

Scanning stops when the unit receives a station. To cancel seek tuning,

press / .

Receiving preset stations

Best stations memory (BSM)

[SEEK] needs to be set to [MAN] in the FUNCTION settings (page 16).

To store stations manually

1

While receiving the station you want to store, press and hold one of the

number buttons (1/ to 6/ ) until it stops flashing.