Siemens Euroset 5015: ™

eurose

en-

r-ru-

r

-

-

-

-

.

m

.

.

7

EN

or

to mark the end of the phone number entered.

only the select function and the function end. With

You may hear an announcement that the

this, you still have the option to set a forwarded call

service is activated.

destination that may change on a case-by-case basis.

a Replace the handset.

Saving call forwarding on a function key

Incoming calls will be forwarded from now on to the for-

warded call destination. Your telephone will not ring.

c?= Lift handset, initiate function.

: Press the repertory key that is designated for

Saving "Deactivate call forwarding" on a function key

the symbol display "

™

on" (see page 6).

The call forwarding, as described in the previous example,

A number already saved is shown in the

can be deactivated again with your network provider e.g.

display. If the memory for this repertory key is

with key sequence

#21#.

empty,

z

appears in the display.

You can save this key sequence on a dedicated repertory key

*21*

as well. If the symbol display is activated and the service is

Enter the select function for "Immediate call

activated as described, the

™ symbol in the display disap-

forwarding".

pears after the service is deactivated.

(a) Set the phone number for the

c?= Lift handset, initiate function.

call forwarding

: Press the repertory key that is designated for

o Enter the phone number of the forwarded call

symbol display "

™ off" (see page 6).

destination.

#21#

# Press the hash key to mark the function end.

Enter the select function for "Immediate call

?a Press the Set key. Replace handset.

forwarding".

or ...

?a Press the Set key. Replace handset.

(b) Reserve changeable call forwarding

Deactivating call forwarding with a function key

= Press the Shift key.

c= Lift handset, press the Shift key.

When "Call forwarding immediately" is acti-

:a Press the repertory key for symbol display

vated later, this key makes the cursor for enter-

"

™ off". Replace handset.

ing the phone number of the forwarded call

destination flash.

The

™ symbol disappears. You may hear an announcement

that the service is deactivated.

# Press the hash key to mark the function end.

?a Press the Set key. Replace handset.

Appendix

Activating call forwarding with a function key

c = Lift handset, press Shift key.

Care

: Press the repertory key for the symbol display

To clean, wipe with a moist or antistatic cloth only, never

"

™

on".

with a dry cloth (risk of electrostatic charging and

™

appears in the display.

discharge) or harsh cleaning agent.

(a) Phone number for call forwarding set

If your telephone is not working perfectly

You may hear an announcement that the

service is activated.

No signal tone: The tone volume might be set to 0.

a Replace the handset.

Lift handset, no dialling tone: Is the connecting lead

From now on, incoming calls will be forwarded

correctly plugged into the telephone and the telephone

to the forwarded call destination. Your tele-

socket?

phone will not ring.

Dialling tone audible but telephone will not dial:

(b) Changeable call forwarding

The connection is OK. Is the dialling mode set correctly

(see page 5)?

o ; Enter the phone number of the forwarded call

destination, press the Last number redial key

eurose

en-

r-ru-

r

-

-

-

-

.

m

.

.

8

EN

PABX only: No connection or incorrect connection when

dialling from memory (e.g. redial, speed dial):

Program external line prefixe.

The other party cannot hear you: Have you pressed the

Mute key? Press the key again. Is the plug from the handset

cord inserted correctly?

Recall key does not work: Set appropriate flash time.

Insert strips

Blank insert strips for the repertory keys can be found on the

Internet at http://www.siemens.com/euroset.

Contacts

If you should encounter any problems when operating the

telephone connected to a communication system with

analogue network access, please contact the network

operator responsible or your dealer.

Authorisation

This device is intended for analogue phone lines in your net-

work.

Country-specific requirements have been taken into consid-

eration.

We, Siemens Home and Office Communication Devices

GmbH & Co. KG, declare that this device meets the essential

requirements and other relevant regulations laid down in

Directive 1999/5/EC.

A copy of the 1999/5/EC Declaration of Conformity is availa-

ble at this Internet address:

http://www.siemens.com/gigasetdocs

.