Siemens Euroset 5015: Preparing the telephone for use

eurose

en-

r-ru-

r

-

-

-

-

.

m

.

.

2

EN

All electrical and electronic products should be disposed of

separately from the municipal waste stream via designated

collection facilities appointed by the government or the local

authorities.

This crossed-out wheeled bin symbol on the product means the

product is covered by the European Directive 2002/96/EC.

The correct disposal and separate collection of your old appliance

will help prevent potential negative consequences for the

environment and human health. It is a precondition for reuse and

recycling of used electrical and electronic equipment.

For more detailed information about disposal of your old appliance,

please contact your city office, waste disposal service or the shop

where you purchased the product.

Preparing the telephone for use

Recommended installation of telephone

◆ Do not expose the telephone to direct sunlight or other

sources of heat.

◆ Operate at temperatures between +5°C and +40°C.

◆ Maintain a distance of at least one metre between the

telephone and radio equipment, e.g. wireless

telephones, wireless pagers or TV sets. Otherwise,

Making calls

telephone communication could be impaired.

◆ Do not install the telephone in dusty areas as this can

shorten the service life of the telephone.

Dialling a number

◆ To clean, wipe with a moist or antistatic cloth only, never

co Lift handset, dial number.

with a dry cloth (risk of electrostatic charging and

Any digits after the 20th digit are moved from right to left in

discharge) or harsh cleaning agent.

the display. The Pause key

< can be used to insert pauses

◆ Furniture lacquer and polish can be damaged by contact

when dialling, starting from the 2nd digit.

with parts of the unit (e.g. device feet).

Last number redial (one of the last 5 call numbers)

Connecting

The last 5 different call numbers dialed are automatically

Insert the short end of the coiled handset cord in the socket

saved (max. 32 digits each).

provided in the handset and the long end in the socket

c Lift handset (or press the Loudspeaker key L

marked with an

a on the underside of the device. Plug the

until the dialling tone is audible).

phone cord into the outlet on the wall and the other end

;...; Press the Redial key repeatedly until the

into the socket marked with a

Y on the underside of the

required call number appears with the place

device. Then your telephone is ready to use.

number (1...5 on the left).

o Enter the place number (1...5).

The relevant call number is redialed.

Dialling using the repertory keys

c Lift handset (or press the Loudspeaker key L

until the dialling tone is audible). (If necessary,

press

= for a 2nd level repertory key).

: Press repertory key.