Siemens Euroset 5015: Operation on a PABX

eurose

en-

r-ru-

r

-

-

-

-

.

m

.

.

5

EN

Changing the PIN

Changing dialling modes during a call

c?M9

If your telephone is set to pulse dialling and you want to use

Lift handset, initiate function.

functions that require tone dialling (e.g. remote access to

an answering machine), you can change the dialling mode

o Enter the current PIN (default setting: 0000).

during a call.

o Enter a new PIN (four digits).

* With an open connection: press the star key.

o Enter the new PIN again to confirm.

o Enter digits for remote control/data transfer.

?a Press the Set key. Replace the handset.

The telephone is reset to the original dialling mode by hang-

Call duration display

ing up the handset.

The telephone can display the approximate call duration in

the display (up to 99 min. 59 sec.). If the call duration dis-

Operation on a PABX

play is activated, the time display begins 12 seconds after

the last digit is dialled.

Enter/delete an external line prefixe

Resetting the counter

If you are using your telephone on a PABX, you may have to

After dialling the first digit or at any point during a call:

save one or more external line prefixes. A dialling pause is

N Press the Reset key.

set automatically with the external line prefixe. You can save

The counter goes back to 0 min. 0 sec.

up to three external line prefixes.

Deactivating/activating

c?0 Lift handset, initiate function.

The call duration display is activated by default.

If no external line prefixe has been set in a

location,

z

appears in the display.

c?18#

If several external line prefixes are saved, these

Lift handset, initiate function.

are displayed next to one another; the current

0/ 1 0: deactivate; 1: activate.

external line prefixe to be edited flashes.

?a Press the Set key. Replace handset.

If necessary, use the

; key to toggle

between the external line prefixes displayed,

Setting the pause time

to edit them as follows:

If necessary, the pause time of the Pause key < (pause

To delete an external line prefix:

function from second input position) can be changed to 1,

?a Press the Set key. Replace handset.

3 or 6 seconds (default setting: 3 seconds).

To enter an external line prefixe:

c?102

Lift handset, initiate function.

o Enter a one- to three-digit code.

0...2 0: 1 sec.; 1: 3 sec.; 2: 6 sec..

Enter additional external line prefixes:

?a Press the Set key. Replace handset.

; o Press the Last number redial key, enter next

external line prefixe.

Changing the dialling mode

?a Press the Set key. Replace handset.

c?# Lift handset, initiate function.

Recall key (on a PABX)

1/ 2 1: Tone dialling.

2: Pulse dialling without flash function.

During an external call, you can make a recall or divert the

call. To do this, press the Recall key

>. The subsequent

?a Press the Set key. Replace handset.

procedure depends on your PABX. By default, the Recall key

is preset to a flash time (interruption time) of 90 ms for use

of new features on public telephone systems. With a

connection to a PABX, it may be necessary to change the

flash time (e.g. 600 ms). To do this, please refer to the

operating instructions for your PABX.