Siemens Euroset 5015: Saving numbers Adjusting the telephone

eurose

en-

r-ru-

r

-

-

-

-

.

m

.

.

3

EN

Saving numbers

Adjusting the telephone

Different telephone settings must be completed with the

Adjusting the ringer volume

Set key

? so that they are available permanently.

The volume of the ringer can be set to one of 7 levels and

In order to cancel without saving, e. g. after an incorrect

can also be deactivated completely (default setting: level 7,

entry, replace the handset instead of pressing

? at the

highest level) or deactivated completely. When the ringer is

end. The original setting is then retained.

deactivated an incoming call is notified in the display only.

Saving with notebook function

◆ To adjust when the telephone is idle:

You can also save phone numbers during a conversation

with the notebook function.

c?5 Lift handset, initiate function.

H...I Adjust the volume with the Loud/Quiet key.

Saving repertory numbers

?a Press the Set key. Replace handset.

You can save up to 20 phone numbers (or even functions,

◆ To adjust while the telephone is ringing:

see page 6) on both levels of the repertory keys.

Press

H...I before lifting the handset.

c? Lift handset, press the Set key. (For 2nd mem-

The last value set is saved.

ory level, also press

=.)

: Press the repertory key under which you want

Setting the ringer frequency

to save the repertory number.

The frequency (speed) of the ringer can be set to one of

A number that has already been saved is

three levels (default setting: level 3).

shown in the display. If the memory for this

c?6 Lift handset, initiate function.

repertory key is empty,

z

appears in the display

1...3 Press one of the keys 1...3:

o Enter the number to be saved (up to 32 digits).

1: highest frequency; 3: lowest frequency.

or ...

?a Press the Set key. Replace handset.

Saving from the redial list:

Setting the ringtone

;...; Press the Redial key repeatedly until the

desired phone number is displayed on the

Ten different ringtones can be set for the ringer (default

screen.

setting: ringtone 0).

?a Press the Set key. Replace handset.

c?7 Lift handset, initiate function.

Pressing

< allows you to save pauses (not at the 1st digit).

0...9 Press one of the keys 0 ... 9

After the 20th digit, any following digits are moved from

?a Press the Set key. Replace handset.

right to left in the display.

Setting the handset volume

Delete all repertory numbers

The volume on the handset can be set to one of 3 levels and

c?1251

saved (default setting: level 1).

Lift handset, initiate function.

c?9 Lift handset, initiate function.

?a Press the Set key. Replace handset.

H...I Adjust the volume with the Loud/Quiet key.

?a Press the Set key. Replace handset.

Mute

You can deactivate the telephone's handset and

microphone. Then the other party can no longer hear you.

J During a call: Press the Mute key

Activate: Press the key again.

eurose

en-

r-ru-

r

-

-

-

-

.

m

.

.

4

EN

Adjusting the loudspeaker

Baby call (direct call) number setting

While in handsfree mode, you can set the volume to one of

If a phone number is set for the Baby Call function, it is

7 levels and save it (default setting: 7).

dialled automatically when the telephone is locked after

H...I Adjust the volume with the Loud/Quiet key.

you lift the handset (or press the Loudspeaker key) and

press any key (except

?, M, L, H and I). The

Activating/deactivating open listening

telephone does not allow other phone numbers to be

The built-in loudspeaker means anyone in the room can lis-

dialled, but incoming calls can be received.

ten-in on a call.

c?M8

L During a call:

Lift handset, initiate function.

press the Loudspeaker key.

o Enter the PIN (default setting: 0000).

To deactivate open listening: press the key

Activating

again.

o Enter direct call number (max. 32 digits; not

When the loudspeaker is activated and the handset is

< for pause function!).

lifted, open listening is activated. The handsfree micro-

or ...

phone is switched off.

Deleting

When the loudspeaker is activated and the handset is

replaced, handsfree talking via the handsfree microphone

; Press the Last number redial key.

is activated.

?a Press the Set key. Replace handset.

Activating/deactivating handsfree mode

Locking/unlocking the telephone

With this telephone you can also make calls without lifting

Only the Baby call number can be dialed when the tele-

the handset. The optimum distance for speaking into the

phone is locked.

microphone is around 50 cm.

c?M Lift handset, then start the function.

◆ Activating via the handset during a call:

1 or 2 0: unlock; 1: lock

L + a Replace the handset while pressing the Loud-

o Enter the PIN (default setting: 0000).

speaker key.

?a Press the Set key. Replace handset.

◆ Activating before dialling a phone number

If the telephone is locked, the display shows

zzzz

.

L Before you dial: press and hold the Loud-

speaker key until the dialling tone is audible.

Temporarily deactivating the telephone lock (for one call)

Deactivating handsfree mode:

cMo Lift the handset, press the lock key, enter the

PIN (default setting: 0000).

c Lift the handset during a call.

o Dial a call number.

Activating/deactivating the mute melody

The telephone lock is active again when the handset is

You can activate and deactivate the mute melody for the

replaced.

mute (default setting: on).

Locking/unlocking repertory numbers so they cannot

c?19#

be changed

Lift handset, initiate function.

0/1 0: deactivate; 1: activate.

c?M6

Lift handset, initiate function.

?a Press the Set key. Replace handset.

(If necessary, press

= in order to lock/unlock

the repertory key on the 2nd level.)

o Enter the PIN (default setting: 0000).

0

/ 1 0: Repertory keys not locked

1: Repertory keys locked.

?a Press the Set key. Replace the handset.