Karcher Balayeuse KM 75-40 W Bp Pack: Before Startup

     - 

4

Note

The cover is unlocked with the key of the 

main switch.



Insert the key for the main switch into 

the hood lock and rotate in a clockwise 

direction by 90°.



Pull the hood lock out by the key.



Open the device hood.



Close the appliance cover, the cover 

lock will lock automatically.



DANGER

Risk of injury, risk of damage! 

Observe the weight of the appliance when 

you load it!



Remove the cardboard.



Remove the wooden blocks that secure 

the wheels and raise the device from 

the palette by hand. 



Release parking brake.



Loosen the screws.



Align the pushing handle.  



Tighten the screws.

Note:

 Remove the waste container and 

move the pushing handle to the front prior 

to tilting the appliance. Do not rest the ap-

pliance on the pushing handle.



Clip side brush on to driver and screw 

on.

Please observe the following warning notes 

when handling batteries:



Danger

Risk of explosion! Do not put tools or similar 

on the battery, i.e. on the terminal poles 

and cell connectors.



Danger

Risk of injury! Ensure that wounds never 

come into contact with lead. Always clean 

your hands after having worked with batter-

ies.



Danger

Risk of fire and explosion!

–

Smoking and naked flames are strictly 

prohibited. 

–

Rooms where batteries are charged 

must have good ventilation because 

highly explosive gas is emitted during 

charging. 



Danger

Danger of causticization!

–

Rinse thoroughly with lots of clear water 

if acid gets into the eye or comes in con-

tact with the skin.

–

Then consult a doctor immediately.

–

Wash off the acid If it comes in contact 

with the clothes.

Note

With the KM 75/40 W Bp Pack the battery 

and the charger are already built in.



Open the device hood.



Set the batteries on to the motor carrier. 



Secure the batteries with the holding 

strap.



Connect pole terminal (red cable) to 

positive pole (+).



Fit the connection wires to the batteries. 



Connect pole terminal to negative pole 

(-).

Note:

 Check that the battery pole and pole 

terminals are adequately protected with 

pole grease.

Only use batteries with terminal cover. Re-

store terminal cover in the event of loss.

CAUTION

Charge the batteries before commissioning 

the machine. 



Danger

Risk of injury! The charger should be used 

only if the mains cable is in an undamaged 

state. Get the manufacturer, the customer 

service agent or a qualified person to im-

mediately replace a damaged mains cable.



DANGER

Risk of electric shock. Observe supply net-

work and fuse protection. Only use the 

charger in dry rooms with sufficient ventila-

tion.

Note:

 The charging time for an empty bat-

tery is approx. 12 hours.



Danger

Risk of injury! Comply with safety regula-

tions on the handling of batteries. Observe 

the directions provided by the manufacturer 

of the charger.

Note:

 Normally, the machine is equipped 

with maintenance-free batteries.



Open the device hood.



Insert the plug of the charger into the 

socket.

Note:

 The charger has electronic controls 

and automatically switches off the charging 

process. All functions of the machine are 

automatically interrupted during the charg-

ing process.

The battery display shows the progress of 

the charging process when the plug is in-

serted: 

Open the device hood.

Close device hood

Before Startup

Unloading tips

Transport weight (without 

batteries)

79 kg 

Weight (with batteries)

125 kg

Unloading

Installing the pushing handle

Install side brush

Batteries

Safety notes regarding the batteries

Observe the directions on the 

battery, in the instructions for 

use and in the vehicle operating 

instructions!

Wear an eye shield!

Keep away children from acid 

and batteries!

Risk of explosion!

Fire, sparks, open light, and 

smoking not allowed!

Danger of causticization!

First aid!

Warning note!

Disposal!

Do not throw the battery in the 

dustbin!

Installing and connecting the batteries

Charge the batteries

Charging process - KM 75/40 W Bp Pack

Batteries are being 

charged

glows yellow

Batteries are charged

glows green

15 EN