Pioneer gm-a5602: Additional information

Appendix

Additional information

Dimensions (W × H × D) ... 238 mm × 60 mm ×

Specifications

180 mm

GM-A5602

Weight .......................................... 1.4 kg (Leads for wiring not

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

included)

allowable)

Maximum power output ....... 120W × 2 (4 W) / 200 W × 2

Grounding system ................... Negative type

(2 W) / 400 W TOTAL

Current consumption ............ 36 A (at continuous power,

(BRIDGE)

4 W)

Continuous power output ... 60 W × 2 (at 14.4 V, 4 W,

Average current drawn ......... 9.5 A (4 W for two channels)

20 Hz to 20 kHz, ≦ 1.0 % THD

15.5 A (4 W for one channel)

+N)

Fuse ................................................ 30 A × 2

180 W × 1 (at 14.4 V, 4 W

Dimensions (W × H × D) ... 348 mm × 60 mm ×

BRIDGE 1 kHz, ≦ 1.0 % THD

215 mm

+N)

Weight .......................................... 2.3 kg (Leads for wiring not

90 W × 2 (at 14.4 V, 2 W,

included)

1kHz,≦ 1.0 % THD+N)

Maximum power output ....... 300W × 2 (4 W) / 450 W × 2

Load impedance ...................... 4 W (2 W to 8 W allowable)

(2 W) / 900 W TOTAL

Frequency response ............... 10 Hz to 70 Hz (+0 dB,

(BRIDGE)

–3 dB)

Continuous power output ... 150 W × 2 (at 14.4 V, 4 W,

Signal-to-noise ratio ............... 95 dB (IEC-A network)

20 Hz to 20 kHz, ≦ 1.0 % THD

Distortion ..................................... 0.05 % (10 W, 1 kHz)

+N)

Low pass filter:

450 W × 1 (at 14.4 V, 4 W

Cut off frequency ........... 80 Hz

BRIDGE 1 kHz, ≦ 1.0 % THD

Cut off slope ..................... –12 dB/oct

+N)

Gain control:

225 W × 2 (at 14.4 V, 2 W,

RCA ...................................... 0.3 V to 6.5 V

1kHz,≦ 1.0 % THD+N)

Speaker .............................. 3.0 V to 26 V

Load impedance ...................... 4 W (2 W to 8 W allowable)

Maximum input level / impedance:

Frequency response ............... 10 Hz to 70 kHz (+0 dB,

RCA ...................................... 6.5 V / 22 kW

–3 dB)

Speaker .............................. 26 V / 16 kW

Signal-to-noise ratio ............... 96 dB (IEC-A network)

Distortion ..................................... 0.05 % (10 W, 1 kHz)

Notes

Low pass filter:

! Specifications and the design are subject to

Cut off frequency ........... 40 Hz to 500 Hz

modifications without notice.

Cut off slope ..................... –12 dB/oct

! The average current drawn is nearly the maxi-

Bass boost:

mum current drawn by this unit when an

Frequency .......................... 50 Hz

audio signal is input. Use this value when

Level ..................................... 0 dB/6 dB/12 dB

Gain control:

working out total current drawn by multiple

RCA ...................................... 0.3 V to 6.5 V

power amplifiers.

Speaker .............................. 3.0 V to 26 V

Maximum input level / impedance:

RCA ...................................... 6.5 V / 22 kW

Speaker .............................. 26 V / 16 kW

GM-A3602

Power source ............................. 14.4 V DC (10.8 V to 15.1 V

allowable)

Grounding system ................... Negative type

Current consumption ............ 14.5 A (at continuous power,

4 W)

Average current drawn ......... 4A(4W for two channels)

6.5 A (4 W for one channel)

Fuse ................................................ 25 A × 1

12

En