Karcher B 60 W Ep: Shutting Down the Appliance

     - 

4



Reducing the speed: Turn the button in 

"–" direction.



Increasing the speed: Turn the button in 

"+" direction.

Caution

Risk of damage to the floor covering. Do 

not operate the appliance on the spot.

Note

The machine is designed in such a way that 

the brush head protrudes on the right. This 

helps in working in a proper way even close 

to the edges.



Turn the program selection switch to 

the desired cleaning program. 



Press the pedal for lowering the clean-

ing head downwards slightly and then 

move it to the left. This unlocks the ped-

al. Release the pedal slowly upwards.

The cleaning head is lowered.

Note

The brush motor comes to a halt when the 

machine stops and when there is overload.



Pull the lever out and press it down; the 

vacuum bar is lowered.

Note

For cleaning tiled floors, set the straight 

vacuum bar in such a way that cleaning is 

done at right angles to the joints. 

The inclined position and the inclination of 

the vacuum bar can be adjusted to achieve 

better suction results (see "Setting the Vac-

uum Bar"). 

If the wastewater reservoir is full,

 the float-

er will close the suction opening and the suc-

tion turbine will run at a higher speed. If this is 

the case, shut the vacuum off and drive to 

empty the wastewater reservoir.



Close the regulatory button for setting 

the water quantity. 



Release the safety switch.



Set the program selection switch to suc-

tion or vacuuming.



Lift the cleaning head. 



Briefly drive forward and suck of the re-

maining water. 



Raise the vacuum bar.



Disconnect the main plug from the 

socket.

몇

Warning

Please observe the local provisions regard-

ing the wastewater treatment.



Take the water discharge hose from the 

support and lower above a suited col-

lection device.



Crush or bend the dosing equipment. 



Open the lid of the dosing equipment. 



Drain off the dirt water - regulate the 

water quantity by pressing or bending. 



Rinse the wastewater reservoir with 

clean water or with the rinsing system 

for the wastewater reservoir (option).



Loosen the lid for emptying the fresh 

water - do not remove it fully. Drain wa-

ter. 



To rinse the fresh water reservoir, re-

move the cover completely and remove 

the fresh water filter.



Danger

Risk of injury! When loading or unloading 

the machine, it may only be operated on 

gradients of max. incline (see "Technical 

Specifications"). Drive slowly.

Caution

Risk of injury and damage! Observe the 

weight of the appliance when you transport it.



Raise the cleaning head to avoid dam-

age to the brushes. 



Remove the brush to avoid damage to 

the brushes.



When transporting in vehicles, secure 

the appliance according to the guide-

lines from slipping and tipping over.

Caution

Risk of injury and damage! Note the weight 

of the appliance in case of storage.

This appliance must only be stored in inte-

rior rooms.



Danger

Risk of injury. Pull the plug from the mains 

before carrying out any tasks on the appli-

ance.



Drain and dispose of the dirt water and 

the residual fresh water.

Setting the Advance Speed 

(BD cleaning head only)

Cleaning

Lower the cleaning head

Lower the vacuum bar

Shutting Down the Appliance

Drain off dirt water

Drain off clean water

Transport Storage Maintenance and care

13 EN